Clamex 6mm 90 degree cover cap gives a finished appearance over Lamello Clamex 6mm connections, so visible joint points present a clean, unified look across the project. The light gray color ties into modern panel and cabinet finishes where a neutral shade blends with common laminate and melamine tones, helping joints recede visually instead of drawing attention. The 90 degree design aligns with Clamex joints in corner or right-angle applications, so caps sit in a predictable orientation that matches the connector geometry. This Lamello-branded solution matches the Clamex system identity by name, aiding part recognition when specifying or restocking. The 6mm sizing follows the Clamex 6mm family designation, supporting consistent selection when working within that connector range on repeated builds.
Clamex 6mm 90 degree cover cap slots into Clamex 6mm workflows by matching the system name and size, so installers can tie caps to the same planning notes used for the core connector layout. The 90 degree description signals suitability for right-angle joints, which aligns well with typical cabinet corners and furniture carcass connections, helping keep visual alignment logical around those meeting edges. The light gray color supports projects using similarly toned materials where a neutral, low-contrast point at each connector benefits the finished presentation, particularly on exposed ends. With Lamello as the stated brand, shops standardizing on Lamello components can fold this cap into their usual Clamex parts lists for consistent project documentation.
Clamex 6mm 90 degree cover cap in light gray suits situations where Lamello Clamex 6mm connectors land in visible zones, such as open cabinet sides or exposed furniture corners. The light gray tone coordinates with many contemporary laminate and melamine panels, so joint locations appear more discreet when viewed from normal working distances. Because the cap is tied by name to the Clamex 6mm family, it integrates logically wherever that connector type is already specified on drawings, simplifying communication between the shop, installer, and site personnel. The 90 degree reference matches typical right-angle constructions, aligning cap orientation with the geometry of cabinet carcasses or mitered-looking butt joints, which keeps the visual layout of each point more predictable along edges.
Clamex 6mm 90 degree cover cap carries a clear Lamello brand and part number 335286, which gives shops a stable catalog reference for repeat orders over multiple projects. When drawings or cut lists note the part number alongside Clamex 6mm connectors, installers can match caps to locations without additional interpretation, reducing confusion in the field. The consistent 6mm identification helps standardize material lists whenever the same connector family is used, allowing shops to repeat a proven combination on follow-on work. Matching the cap identity to the Clamex system also aids inventory organization, so bins for 6mm connectors and their corresponding caps can be labeled in a straightforward way that supports quick picking and fewer mixups during assembly.
Clamex 6mm 90 degree cover cap conceals Lamello Clamex 6mm connection points, so visible joints present a cleaner, finished look on cabinets or furniture builds.
Clamex 6mm 90 degree cover cap shares the 6mm designation with Clamex 6mm components, helping installers match the cap to that connector family in planning and documentation.
Clamex 6mm 90 degree cover cap is suited to right-angle Clamex joints, aligning with cabinet corners or carcass junctions where the connector sits at 90 degrees.
Clamex 6mm 90 degree cover cap in light gray offers a neutral tone, which helps joint locations blend with many light or gray panel finishes on modern projects.
Lamello branding on the Clamex 6mm 90 degree cover cap keeps it aligned with the Clamex system, simplifying specification for shops already using Lamello hardware.
Part number 335286 uniquely identifies this Clamex 6mm 90 degree cover cap, so teams can record, reorder, and stock the exact same cap across multiple projects.
Clamex 6mm 90 degree cover cap, light gray, ties directly to Lamello Clamex 6mm connectors and part number 335286, so it fits neatly into material lists wherever that connector family is used. The light gray color supports visually consistent finishes across many modern cabinet and furniture applications. For shops and installers standardizing on Lamello hardware through Wurth Baer Supply, this cap offers an organized way to finish Clamex 6mm joints with a neutral, system-matched solution that aligns with existing documentation and inventory practices.
Sold In: 1 Package