Clamex 6mm 90 Cover Cap, Dark Brown (100/Box) is a Lamello cover cap designed for 6mm Clamex connections set at 90 degrees, so you can visually finish that joint with a color-matched cap instead of leaving the Clamex opening exposed. The 6mm sizing ties directly to Lamello Clamex 6mm biscuit-style fastener geometry, letting you close off the connection point while keeping the Clamex system ready for service access when needed. The dark brown color gives installers and shop crews an option that blends into darker panels or edging where a light cap would stand out. Supplied in a 100 quantity under Lamello manufacturer part number 335289, this Clamex 6mm 90 cover cap format supports repeat work on projects that share the same Clamex 6mm layout, so you can move from cabinet to cabinet without switching to another cap type.
This Clamex 6mm 90 cover cap from Lamello is part of the Fasteners, Dowels & Biscuits category, connecting directly to work that already uses Clamex 6mm biscuits in cabinet or furniture assemblies. Because it is specified for 6mm and 90-degree joints, installers can pair it with those Lamello Clamex connector layouts without reworking the joint design. The dark brown cap color supports installations on darker casework within that same workflow, giving crews a defined cap option when layouts are already based around 6mm biscuits. With a consistent 100/Box configuration, planning for runs that share the same Clamex 6mm corner joint becomes more predictable in the shop.
Clamex 6mm 90 cover caps sit naturally in projects where Lamello Clamex 6mm biscuits already establish the main connector system, since the cap is built around that same 6mm reference. The Fasteners, Dowels & Biscuits classification signals that this piece is intended to live alongside those joint components in your process rather than as a separate trim item. On right-angle cabinet corners or similar 90-degree connections, the 90 designation lets you match cap style to how the Clamex joint is oriented in the panel. The dark brown color ties directly to darker substrates, so the cap can visually follow door, panel, or carcass tones when those elements are finished in deeper shades.
The fact that this is a Clamex 6mm 90 cover cap anchors it to a specific Lamello connector geometry, meaning once a shop is tooled up for 6mm Clamex biscuits, the same sizing logic carries through to the cap. Manufacturer part number 335289 gives project managers and purchasing teams a single reference that always points to the same dark brown, 6mm, 90-degree cap configuration, helping maintain consistency across repeat cabinet lines. The 100/Box quantity matches the needs of runs where multiple 6mm Clamex joints are used per cabinet, so estimators can align a predictable cap count to known connector counts. By staying within the Lamello Clamex family under that part number, crews working on service work or add-ons can call out the same cap spec when they return to existing installations.
The Clamex 6mm 90 cover cap, Dark Brown (100/Box), is a Lamello cover cap in the Fasteners, Dowels & Biscuits class, used with Clamex 6mm joints in woodworking assemblies.
The Clamex 6mm sizing ties the cap to Lamello Clamex 6mm connector layouts, so it matches joints built around that 6mm biscuit-style geometry in cabinet or furniture work.
The 90 designation on the Clamex 6mm 90 cover cap indicates it is intended for 90-degree Clamex connections, matching common right-angle cabinet or casework joints.
The dark brown Clamex 6mm 90 cover cap version aligns visually with darker panels or edging, so the capped Clamex opening better follows the surrounding surface tone.
Clamex 6mm 90 cover cap, Dark Brown (100/Box), is supplied in a 100 count, supporting runs of work that repeat the same Lamello Clamex 6mm joint layout.
This Clamex 6mm 90 cover cap is identified by Lamello manufacturer part number 335289, tying directly to the dark brown, 6mm, 90-degree configuration for future orders.
Choosing the Clamex 6mm 90 cover cap, Dark Brown (100/Box), lines your shop up with a Lamello part built for 6mm, 90-degree Clamex connections under part number 335289. When your cabinet or casework layouts already rely on Lamello Clamex 6mm biscuits, this dark brown cap offers a defined way to visually close those joints. For runs that carry a consistent connector specification, this product gives estimators, engineers, and installers a single cap standard that aligns with the existing fastener system.
Sold In: 1 Package