Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood sink base gives you a 36 inch wide, 34-1/2 inch high, 24 inch deep cabinet that anchors a standard kitchen sink run, so layouts around common appliances and counters line up without extra shimming or filler work. The Glenwood model uses a recessed panel front, which sets the door face back slightly, creating a defined frame line that suits many traditional and transitional kitchen designs where installers want a consistent framed look. The cabinet belongs to the Kitchen Kompact product class, so it matches other cabinets from the same line for coordinated projects using this series. The manufacturer part number GW36RBS identifies this exact Glenwood 36 inch recessed panel sink base, which helps when ordering multiple units or repeating a layout across phases of a job. Solid construction details in the frame and structure support the daily loads placed around the sink area.
This Kitchen Kompact base cabinet is 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it follows common kitchen base dimensions that align with standard countertop depths and appliance openings. The solid 3/4 inch hardwood frame around the recessed panel front forms a rigid rectangle that helps keep doors aligned after the cabinet is leveled and fastened into place. Mortise and tenon rail joints that are kiln-dried and glued reduce frame twist during transport and installation, which supports more accurate reveals when the run is complete. Solid wood toe kicks at 3/4 inch thickness give a firm front edge to scribe or finish against flooring transitions. Solid wood hanging strips at the top and bottom edges of the box offer defined zones for anchoring the cabinet into studs or neighboring cabinets so the unit stays fixed under load.
The Glenwood 36RBS sink base works in layouts calling for a 36 inch wide sink cabinet centered under a window run or between base units, because its 24 inch depth matches standard countertop projections. The 34-1/2 inch cabinet height supports typical finished counter heights when paired with common countertop thicknesses, keeping sink rims at an expected working level across matching Kitchen Kompact pieces. Solid 3/4 inch oak, maple, or beech frame members around the recessed panel front give the face enough rigidity for repeated door use in busy kitchen zones. End panels with 3-ply construction and a 1/2 inch engineered wood core maintain side stability, so the cabinet can serve as a middle or end unit without the sides bowing when countertops and adjacent cabinets are tightened into a continuous line.
Mortise and tenon joints on the kiln-dried rails, glued during assembly, create a front frame that holds its squareness, which helps installers achieve consistent door gaps and alignment when hanging or adjusting doors on the Glenwood sink base. Solid wood corner blocks that are glued and power nailed tie the frame to the cabinet box, resisting flex while the top is cut for a sink opening and while the countertop is set in place. The 3/4 inch thick solid wood toe kicks provide a sturdy front base that supports shimming and leveling, helping the cabinet stay steady after final fastening. Solid wood hanging strips at both the top and bottom edges of the base cabinet give clear structural lines for screws into studs or into adjacent cabinets, which supports straight runs in multi-cabinet installations. The 3-ply end panels with hardwood veneers maintain a stable outer surface, supporting finish consistency across a row of Kitchen Kompact units.
The Kitchen Kompact Glenwood sink base measures 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet and countertop depth expectations in typical kitchen layouts.
The sink base frame uses solid 3/4 inch oak, maple, or beech, giving a hardwood structure that resists racking and supports stable door alignment under everyday kitchen use.
Each rail on the Glenwood 36RBS is kiln-dried, joined by mortise and tenon, and then glued, creating tight joints that help keep the cabinet front square during installation and use.
The corners use solid wood corner blocks that are glued and power nailed, tying the frame to the box to maintain squareness while cutting for sinks and setting countertops.
The toe kicks are solid wood and 3/4 inch thick, providing a firm front base that supports shimming, leveling, and daily foot traffic in front of the sink area.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable cabinet sides with a hardwood appearance.
The Kitchen Kompact Glenwood 36 inch recessed panel sink base combines a 36 inch width, 34-1/2 inch height, and 24 inch depth with a solid 3/4 inch hardwood frame, helping installers build standard-height, standard-depth kitchen runs. Mortise and tenon, kiln-dried, and glued rail joints, along with solid wood corner blocks and toe kicks, provide a structural base that supports cutting in sinks and setting countertops. End panels with 3-ply construction and hardwood veneers align visually with other Kitchen Kompact pieces in the same line. Use the GW36RBS part number when planning repeatable Glenwood sink base placements in larger projects.
Sold In: 1 Each