Kitchen Kompact Glenwood sink base gives you a 33 inch wide, 34-1/2 inch high, 24 inch deep cabinet designed to anchor a sink run with a consistent Glenwood recessed panel look. The frame is built of solid 3/4 inch oak, maple, or beech, so the face structure holds hinges and doors solidly under everyday use. Each rail is kiln-dried, then joined by mortise and tenon and glued, which creates a tight, stable joint that resists racking when the base is loaded or the doors are operated repeatedly. Solid wood corner blocks are glued and power nailed, tying the frame and sides together so the cabinet stays square during handling and installation. The 33 inch width gives room for common sink sizes while aligning cleanly with adjacent Kitchen Kompact units in a straight run.
The solid 3/4 inch wood frame on this Glenwood sink base gives a true reference surface for aligning adjacent fronts during layout. Kiln-dried, mortise-and-tenon rails support a square opening that helps sinks seat consistently against the face. Solid wood hanging strips at the top and bottom of base and wall cabinets provide reliable back locations for fasteners into the wall, which aids in pulling runs tight and level. Solid wood toe kicks at 3/4 inch thickness create a robust lower section that stands up as you shim and adjust along the floor. The 3-ply, 1/2 inch engineered wood core end panels with hardwood veneers offer a stable side construction that works with the solid corner blocks to keep the box aligned while you tie units together.
The Kitchen Kompact 33 inch wide Glenwood sink base is sized for use as the central base in a sink run within a Kitchen Kompact layout. Its 34-1/2 inch height and 24 inch depth match standard base dimensions, so it sits in line with neighboring Kitchen Kompact cabinets to support a continuous countertop. The Glenwood recessed panel style matches other Glenwood pieces, allowing a uniform front appearance when this unit is used as the primary sink location in a run of cabinets.
The solid 3/4 inch oak, maple, or beech frame works with the kiln-dried, mortise-and-tenon, glued rails to keep the front opening square, which helps doors operate smoothly and keeps the sink edge consistent against the cabinet face. Solid wood corner blocks that are glued and power nailed tie the case together at high-stress points, so the cabinet maintains alignment while you fasten it to walls and neighboring units. Solid wood toe kicks at 3/4 inch thickness provide a strong base for shimming along irregular floors while still presenting a clean toe area once the run is set. Solid wood hanging strips placed at the top and bottom of wall and base cabinets give predictable fastening lines from unit to unit, making it easier to maintain level and plumb as you move down the run. The 3-ply, 1/2 inch engineered wood core end panels with hardwood veneers supply dimensionally stable sides that cooperate with the corner blocks and frame, supporting a square box that simplifies countertop templating and final fit.
The Kitchen Kompact Glenwood sink base measures 33 inches wide, 34-1/2 inches high, and 24 inches deep, which aligns with standard base cabinet sizing in many kitchen layouts.
The Glenwood sink base frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood face for mounting doors and hardware in typical kitchen use.
Each rail on the Glenwood 33RBS is kiln-dried, joined by mortise and tenon, and then glued, forming rigid front joints that help the cabinet stay square under load.
This Kitchen Kompact sink base uses 3/4 inch thick solid wood toe kicks, providing a sturdy lower section that supports the cabinet along the floor line.
The Glenwood sink base uses solid wood corner blocks that are glued and power nailed, tying the cabinet box together at key stress points for structural stability.
End panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, combining stable core material with a hardwood-faced surface.
The Kitchen Kompact Glenwood 33 inch wide sink base provides a solid 3/4 inch hardwood frame, kiln-dried mortise-and-tenon glued rails, and solid wood corner blocks for a stable cabinet at the center of a sink run. Solid wood toe kicks and solid hanging strips support installation and alignment within Kitchen Kompact wall and base layouts. The 3-ply, 1/2 inch engineered wood core end panels with hardwood veneers complete a cabinet box suited to tie into adjoining Kitchen Kompact units. Use this GW33RBS sink base when a framed Glenwood recessed panel cabinet is needed in a 33 inch sink location.
Sold In: 1 Each