Kitchen Kompact Glenwood sink base GW42RBS is a 42 inch wide, 34-1/2 inch high, 24 inch deep base cabinet built for sink installations that need a cabinet-grade support structure. The solid 3/4 inch wood face frame creates a rigid front that helps the sink and countertop sit on a stable base during everyday use. Recessed panel styling on the Glenwood series gives a clean front appearance while still using a traditional frame construction that suits many kitchen layouts. With the 42 inch width, installers can span wider sink cutouts while still landing on standard base footprints. The 34-1/2 inch height and 24 inch depth match common kitchen base dimensions, which helps align this sink base with adjacent cabinets and standard countertop heights.
This Kitchen Kompact Glenwood 42 inch wide sink base uses a face frame built from solid 3/4 inch oak, maple, or beech, so the front opening remains stable while you align the sink and countertop. The 34-1/2 inch cabinet height works with typical toe space and finished countertop thickness to reach common working heights, which helps keep runs level from cabinet to cabinet. The 24 inch depth matches standard base depth, so the sink base lines up with neighboring units and supports a full-depth countertop. Solid wood hanging strips at the top and bottom give defined screw zones when fastening to walls or adjoining cabinets, which supports consistent alignment along the entire cabinet run.
The Kitchen Kompact Glenwood 42RBS base cabinet is sized for locations that call for a 42 inch wide sink or a centered sink with extra workspace under the counter. With a 34-1/2 inch height and 24 inch depth, this sink base fits standard kitchen base lines, so it can be positioned between other Kitchen Kompact base units without stepping the countertop in or out. The recessed panel front ties into the broader Glenwood style, allowing the sink area to visually match other Glenwood cabinets in the room. Solid wood toe kicks at 3/4 inch thickness create a firm front edge at floor level, so shims under the cabinet translate cleanly into level support along the entire face of the sink opening.
All frames on this Glenwood sink base are built from solid 3/4 inch oak, maple, or beech, which gives installers a strong face frame to clamp against when pulling cabinets together in a run. Each rail is kiln dried, then joined with mortise and tenon joints and glued, so the front frame maintains squareness under the weight of sink cutouts and countertop slabs. Solid wood corner blocks that are glued and power nailed add stiffness at each corner, helping the box remain square while it is moved into position and fastened. Solid wood hanging strips located at the top and bottom on base cabinets create predictable fastening points that accept screws along their length, supporting a consistent pull to the wall. The 3 ply, 1/2 inch engineered wood core end panels with hardwood veneers provide stable sides that resist warping, helping doors and fronts stay aligned over time. Together these construction elements give the GW42RBS sink base a structure suited for everyday kitchen use where loads and moisture are present around the sink area.
The Kitchen Kompact Glenwood GW42RBS sink base measures 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with common base cabinet and countertop layouts.
The GW42RBS face frame uses solid 3/4 inch oak, maple, or beech, giving the front a hardwood structure that helps resist racking and supports the sink and countertop load.
The frame rails on this Glenwood sink base are kiln dried, mortise and tenon joined, and glued, creating tight connections that help the frame stay square under everyday kitchen use.
The GW42RBS uses solid wood corner blocks that are glued and power nailed, so the corners stay rigid when the cabinet is moved, leveled, and fastened into a run.
The toe kicks on this Kitchen Kompact sink base are solid wood and 3/4 inch thick, providing a sturdy base edge for shimming and leveling along the front.
The end panels are 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving stable cabinet sides that hold finish and resist movement.
The Kitchen Kompact Glenwood 42RBS sink base combines a 42 inch wide, 34-1/2 inch high, 24 inch deep footprint with a solid 3/4 inch hardwood face frame, so it fits standard base layouts while supporting sink and countertop loads. Kiln dried, mortise and tenon joined rails, solid wood corner blocks, and 3/4 inch solid wood toe kicks give this cabinet a structure aimed at staying square in service. For projects built around the Glenwood recessed panel style, this sink base provides a matching framed unit sized for central sink locations in a run.
Sold In: 1 Each