Kitchen Kompact 48"W x 34-1/2"H x 24"D Warmwood Base Cabinet, Recessed Panel - WW48B

Kitchen Kompact Warmwood Base Cabinet For Runs

Kitchen Kompact Warmwood base cabinet gives you a 48 inch wide, 34-1/2 inch high, 24 inch deep base unit that anchors kitchen runs with a consistent footprint for standard countertops. The recessed panel design with maple flat panel doors creates a uniform face that aligns with matching Kitchen Kompact pieces, so layouts stay visually consistent across a project. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which ties the corners together as a solid frame that resists racking when doors are operated repeatedly. Maple flat panel doors pair with a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving a stable core behind a matching maple appearance across the fronts. This cabinet sits on solid wood toe kicks that are 3/4 inch thick, so the base supports normal kitchen loads while maintaining a clean toe space line along the floor.

Construction Details That Support Daily Use

• Mortised and tenoned solid 3/4 inch maple door frames form a rigid door assembly that holds alignment at the joints under regular opening and closing in a busy kitchen.
• The flat panel plywood insert uses a three-ply core with a rotary cut hard maple veneer face, so the panel stays stable while presenting a hard maple surface that visually matches the solid maple frame.
• Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the case holds square when the unit is loaded with typical base cabinet contents.
• Solid wood hanging strips located on the top and bottom give defined structural rails that accept mounting to wall structure, keeping the cabinet body supported along its length.
• Adjustable shelves let you position storage levels within the cabinet interior, so installers can set shelf heights to match the contents and user reach.
• Plywood drawers are standard, with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet for stability, so drawer motion stays guided along the full depth.

Warmwood Finish And Hinge Function In Practice

The Warmwood finish on this base cabinet is created with a 4 step process of stain, sealer, sanding and catalyzed top coat, so the maple and veneer surfaces receive a complete finishing system on the production line. That layered approach gives the fronts and casework a finished surface ready to go into a kitchen environment without additional shop finishing. Adjustable shelves work with the cabinet height of 34-1/2 inches to offer multiple usable storage spaces between the bottom and top of the interior, so installers can organize space around plumbing or appliance clearances. Concealed, self-closing hinges are used on the maple flat panel doors, which keeps hinge hardware out of sight when doors are closed and pulls doors shut to their resting position during normal use.

How This WW48B Base Cabinet Fits Kitchens

Where The Kitchen Kompact WW48B Works Best

This Kitchen Kompact 48 inch base cabinet fits in layouts that call for a wider base span under a run of countertops, using the 48 inch width and 24 inch depth to match standard counter dimensions. The Warmwood 48B base cabinet WW48B pairs with other Kitchen Kompact cabinets in the same Warmwood line, so designers can carry the recessed panel maple look across corners and appliance openings. Maple flat panel doors on the WW48B give the front elevation a consistent framed panel style, which ties in with upper cabinets using similar door construction. The solid wood toe kicks at 3/4 inch thickness provide a defined setback at floor level that aligns across multiple base units, so flooring and trim can be detailed to a uniform toe space line.

Why Construction Details Support Repeatable Results

The door frames on this Kitchen Kompact Warmwood base cabinet use mortised and tenoned construction of solid 3/4 inch maple, so hinge loads transfer through robust joints and doors stay aligned over repeated use. The three-ply flat panel plywood insert with rotary cut hard maple veneer face works together with the maple frame to keep the door surface flat, supporting even reveals against adjacent cabinets. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, so when the unit is set, shimmed, and fastened, the case remains square for clean door and drawer gaps. Solid wood hanging strips on the top and bottom define straight structural lines for fastening, helping maintain level alignment with neighboring units across a long wall run. The plywood drawers, running on a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, keep drawer travel supported along the full depth, which helps drawers track consistently when loaded. Concealed, self-closing hinges on the maple flat panel doors return the doors to a closed position, supporting uniform gaps and reducing the need for frequent manual door positioning after use.

Common Questions About This Warmwood Base Cabinet

Select The WW48B For Coordinated Warmwood Runs

This Kitchen Kompact Warmwood base cabinet WW48B gives installers a 48 inch wide recessed panel unit with maple flat panel doors, plywood drawers, and solid wood toe kicks ready for use in base cabinet runs. The 4 step Warmwood finish process and concealed, self-closing hinges on the doors provide a finished look and controlled door closing across the front elevation. Use this 48 inch by 34-1/2 inch by 24 inch Kitchen Kompact Warmwood base cabinet when planning straight or L-shaped layouts that call for a wider base segment within a coordinated Warmwood line.