Kitchen Kompact Warmwood base cabinet 36W x 34-1/2H x 24D provides a standard-size base run cabinet for kitchen layouts where a 36 inch footprint is required. The recessed panel design with maple flat panel doors provides a consistent Warmwood look across the run. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which creates a rigid door assembly that resists racking during everyday use. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the visible center panel presents a maple grain that aligns with the frame. Solid wood corner blocks are glued and power nailed, giving the cabinet case added rigidity at the corners so it stays square during installation and service. Solid wood hanging strips are located on the top and bottom, providing solid anchoring points when the cabinet is secured into position.
This Kitchen Kompact 36W x 34-1/2H x 24D base cabinet size matches common kitchen base dimensions, fitting into layouts planned around standard depths and heights. The cabinet uses maple flat panel doors with a recessed panel design, so the door faces sit within the frame profile for a traditional flat center look. Adjustable shelves inside the cabinet allow shelf heights to be changed without altering the cabinet case, which helps when interior storage needs to be tailored to cookware or pantry use. Concealed, self-closing hinges are used on the cabinet doors, so the hinge hardware remains hidden from the front while providing a self-closing action at the end of the swing. Solid wood toe kicks, 3/4 inch thick, run along the bottom front, tying visually into the base while forming a substantial lower section.
The Warmwood WW36B base cabinet from Kitchen Kompact is a 36 inch wide, 34-1/2 inch high, 24 inch deep base unit that fits common kitchen base footprints. Door frames are mortised and tenoned solid 3/4 inch maple, so each door presents a solid hardwood frame around the recessed panel. The flat panel plywood insert uses a three-ply construction with a rotary cut hard maple veneer face, which brings the Warmwood finish across a consistent maple surface on the panel. Maple flat panel doors across the front tie the Warmwood finish of the frame and panel together, which helps this cabinet align visually with other Kitchen Kompact Warmwood pieces. Solid wood corner blocks that are glued and power nailed sit inside the cabinet corners, adding structural strength to the case so it works as a stable base in a longer run. Solid wood hanging strips at the top and bottom of the back connect the sides, helping the cabinet maintain its shape once fastened into position.
The Warmwood base cabinet uses adjustable shelves so interior space can be arranged without altering the cabinet box, which helps when different stored items need varying clearances. Concealed, self-closing hinges on the maple flat panel doors keep the hinge hardware out of sight from the front while drawing the doors closed at the end of travel, which supports consistent door resting positions. Solid wood toe kicks, 3/4 inch thick, form a sturdy lower front, keeping the toe area constructed from solid stock as part of the base. Plywood drawers are standard in this cabinet, so the drawer boxes use plywood panels for their construction, supporting typical kitchen storage loads. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, which keeps the drawer guide members tied firmly into wood structure as they move. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the cabinet surfaces, so the Warmwood finish is built up in layers as part of the factory process.
The Kitchen Kompact Warmwood base cabinet measures 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet openings in many kitchen layouts.
The cabinet uses maple flat panel doors with door frames in solid 3/4 inch maple and a flat panel plywood insert with a rotary cut hard maple veneer face, giving a consistent maple appearance.
Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints that hold the frame corners together during repeated door use.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet for stability and guided movement.
The Warmwood base cabinet has adjustable shelves, so interior shelf positions can be set to accommodate different stored items within the fixed cabinet dimensions.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, building the Warmwood finish as a layered factory-applied coating on the cabinet surfaces.
The Kitchen Kompact Warmwood base cabinet 36W x 34-1/2H x 24D combines a standard base footprint with maple flat panel doors, mortised and tenoned solid maple door frames, and a three-ply flat panel plywood insert with rotary cut hard maple veneer face. Solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, provide a strengthened cabinet case for use in a base run. Plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back add practical storage within the cabinet. For projects built around the Warmwood finish and these construction details, this WW36B base cabinet provides a defined 36 inch base position in the kitchen plan.
Sold In: 1 Each