Kitchen Kompact Warmwood Base Cabinet For Kitchens

Kitchen Kompact Warmwood base cabinet is a 42 inch wide, 34-1/2 inch high, 24 inch deep base cabinet that provides a standard-size footprint for kitchen layouts. The recessed panel design with maple flat panel doors creates a consistent Warmwood appearance that aligns with Kitchen Kompact installations using the same style. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which creates tight joints that hold alignment during repeated door use. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the door surface keeps a maple look while using a stable plywood core. Solid wood hanging strips located on the top and bottom give solid mounting points to tie this cabinet into wall and floor runs during installation.

Construction Details That Support Daily Use

• Door frames use mortised and tenoned solid 3/4 inch maple, which creates a rigid frame that helps doors stay square and swing consistently in a busy kitchen.
• The flat panel plywood insert with a three-ply core and rotary cut hard maple veneer face provides a stable, smooth maple surface that resists typical panel movement in service.
• Solid wood corner blocks are glued and power nailed, forming reinforced corners that keep the cabinet box tight when installed in a run of bases.
• Solid wood hanging strips located on the top and bottom create continuous mounting areas that help align the cabinet with adjoining units and structural backing.
• The 4 step process of stain, sealer, sanding and catalyzed top coat creates a finished surface that stands up to normal kitchen traffic and cleaning.
• Solid wood toe kicks, 3/4 inch thick, give a sturdy front support area that ties into standard base cabinet toe space and resists impact from foot traffic.

Base Cabinet Fit, Hinges, Shelves, And Drawers

This Kitchen Kompact 42W x 34-1/2H x 24D base cabinet follows standard base dimensions, which helps it line up with typical countertop depths and toe spaces. Adjustable shelves allow the installer or user to position storage heights inside the cabinet, which improves space use for different cookware or supplies. Concealed, self-closing hinges keep the hardware out of sight when the doors are shut and pull the doors closed from a partially open position, which helps doors sit properly against the face frame. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, giving the drawer a guided slide path that stays anchored to the cabinet box.

Applying The Warmwood WW42B Base In Kitchen Runs

Where This Warmwood WW42B Cabinet Works

The Warmwood WW42B base cabinet is designed as a kitchen base unit in the Kitchen Kompact line, so it fits naturally into Warmwood installations needing a 42 inch wide base. The recessed panel, maple flat panel doors and Warmwood finish match the description of other Warmwood components, which supports a consistent run of cabinetry along a wall. The solid wood toe kicks at 3/4 inch thickness give the front lower area a sturdy face that aligns with adjoining base cabinets using the same construction style. Solid wood hanging strips at the top and bottom of the cabinet let installers fasten this unit to wall studs or blocking in a way that keeps the face aligned with neighboring cabinets. By using the same construction details across the run, this 42 inch piece helps fill wider cabinet sections without breaking the visual line.

Details That Help Alignment And Long-Term Function

The door frames built with mortised and tenoned solid 3/4 inch maple support precise hinge placement, which helps concealed, self-closing hinges operate smoothly over time. The flat panel plywood insert with three-ply construction and a rotary cut hard maple veneer face gives the doors a balanced panel that reduces typical warping forces on the frame, helping margins stay even around the opening. Solid wood corner blocks that are glued and power nailed tie the cabinet sides, front, and back together, which keeps the box square when fastened to adjacent units and loaded with stored items. The 4 step process of stain, sealer, sanding and catalyzed top coat builds a layered finish over the maple veneer and exposed wood, helping the Warmwood color and surface handle everyday contact from hands, small impacts, and routine wiping. The plywood drawers paired with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet give drawers a supported travel path from face to back, which matters when drawers are repeatedly opened and closed in a working kitchen.

Common Questions About The Warmwood WW42B Cabinet

Selecting This Warmwood Base For Your Layout

The Kitchen Kompact Warmwood base cabinet, WW42B, combines a 42W x 34-1/2H x 24D footprint with recessed panel maple doors, adjustable shelves, plywood drawers, and concealed self-closing hinges, giving installers a standard-size Warmwood option that ties easily into coordinated kitchen runs.