Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood base cabinet gives you a 30 inch wide, 34-1/2 inch high, 24 inch deep cabinet that anchors a run of base units and sets clear working dimensions for layouts. The recessed panel Warmwood style ties directly to the Kitchen Kompact line, so it aligns visually with other cabinets from the same series. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a tight, square joint that helps doors hang straight over time. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face provides a stable center panel that keeps the Warmwood look consistent across doors. Maple flat panel doors keep material and appearance in the same species family, simplifying design decisions on a job.
A four step process of stain, sealer, sanding, and catalyzed top coat is applied, creating a finished surface system that covers the Warmwood cabinet inside and out with a repeatable factory process. This multi-step finish helps the maple faces and doors present a consistent color tone from unit to unit on a project. Adjustable shelves work in combination with the finish system, so shelf positions can be changed without exposing unfinished edges during later adjustments. Concealed, self-closing hinges mount the maple flat panel doors in a way that keeps hinge hardware out of sight when doors are closed while drawing doors fully shut at the end of travel. This hinge style supports clean face lines on installed runs and helps doors return to a closed position after normal use.
This Kitchen Kompact base cabinet in Warmwood, identified by manufacturer part WW30B and SAP description WARMWOOD 30B, is built as a 30 inch wide base unit for standard kitchen layouts. The recessed panel Warmwood design pairs solid 3/4 inch maple door frames with maple flat panel doors, giving a unified maple appearance across the front of the cabinet. The flat panel plywood insert with rotary cut hard maple veneer face carries the same species on the center panel, so the whole elevation presents a continuous maple look. Solid wood toe kicks at 3/4 inch tie directly into the face style and give a defined base line, which matters where multiple base cabinets sit side by side. Solid wood hanging strips top and bottom allow this base cabinet to be anchored in line with adjacent units while keeping fasteners in wood members designed for that purpose.
The mortised and tenoned construction of the solid 3/4 inch maple door frames creates joints with high contact area, which helps doors maintain alignment after repeated opening and closing. Solid wood corner blocks that are glued and power nailed connect the cabinet sides, front, and back, so the case resists twisting stresses during transport, setting, and leveling. Plywood drawers as standard, combined with the front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, provide a guided drawer motion that stays consistent when drawers are loaded in typical kitchen service. The concealed, self-closing hinges control the last part of door travel, so doors are drawn to the face frame and held there, supporting even reveals across multiple cabinets. The four step finishing process of stain, sealer, sanding, and catalyzed top coat establishes a protective and visually even finish layer, which helps the cabinet surfaces handle normal contact in a working kitchen environment while keeping the Warmwood tone uniform. Adjustable shelves extend that performance by letting storage be configured without cutting or modifying interior parts.
The Kitchen Kompact Warmwood base cabinet measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, giving a standard base footprint and height for typical kitchen layouts.
The door frames are solid 3/4 inch maple with mortised and tenoned construction, creating strong joints that help doors stay square and hang properly over repeated use.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, supporting smooth and stable drawer travel under load.
The cabinet uses concealed, self-closing hinges, so the hardware stays hidden when doors are shut while pulling the doors closed at the end of travel for consistent alignment.
The Warmwood cabinet finish uses a four step process of stain, sealer, sanding, and catalyzed top coat, producing a consistent, factory-applied coating over the maple and panel faces.
Solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, reinforce the case and provide strong fastening areas during installation.
The Kitchen Kompact Warmwood base cabinet WW30B combines a 30 inch wide, 34-1/2 inch high, 24 inch deep footprint with solid 3/4 inch maple door frames, maple flat panel doors, and plywood drawers to build a consistent cabinet platform. Mortised and tenoned maple frames, solid wood corner blocks, and solid wood hanging strips give the case structure that suits standard base cabinet runs. Concealed, self-closing hinges, adjustable shelves, solid wood toe kicks, and the four step stain, sealer, sanding, and catalyzed top coat system support a finished installation that aligns with other Kitchen Kompact pieces. Use these verified details to match this Warmwood unit to base positions where a recessed panel maple look and standard base dimensions are needed.
Sold In: 1 Each