Kitchen Kompact Warmwood base cabinet WW15B is a 15 inch wide, 34-1/2 inch high, 24 inch deep base cabinet that provides a compact lower-cabinet footprint, which helps lay out narrow runs or fill small gaps in kitchen cabinetry while matching a Warmwood series run. The cabinet uses maple flat panel doors with a recessed panel design, giving a consistent front profile that ties in with other Warmwood recessed panel components in the same line. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so the joints are mechanically interlocked, which supports rigid door alignment under repeated opening and closing. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, creating a stable center panel that accepts the Warmwood finish while keeping movement under control. Solid wood hanging strips located on the top and bottom give solid anchoring points, which matters when fastening cabinets in a straight, level run.
This Warmwood recessed panel base cabinet uses solid wood toe kicks, 3/4 inch thick, creating a solid front base profile that accepts field scribing or trimming where needed along the floor line. Solid wood hanging strips located on the top and bottom provide consistent horizontal members, so fastening can occur into those strips while aligning the cabinet with adjacent units. The cabinet dimensions of 15 inches wide, 34-1/2 inches high, and 24 inches deep match common base cabinet sizing, which supports layout with standard-depth countertops and neighboring units. Adjustable shelves are part of the interior, allowing shelf position to be set around stored items after the cabinet is leveled and fastened in place. Concealed, self-closing hinges are used on the maple flat panel doors, which pull the doors shut and keep the hinge hardware out of sight from the front elevation.
The Kitchen Kompact 15 inch Warmwood base cabinet WW15B fits into kitchen layouts that need a narrow base unit in a 34-1/2 inch high line under counters, so it can close a small gap or provide a focused storage bay. With 24 inch depth, the cabinet aligns with standard depth bases, which helps keep countertop fronts and cabinet faces on the same plane. Maple, flat panel doors with a recessed panel profile carry the Warmwood look, aligning visually with other Kitchen Kompact Warmwood recessed panel cabinetry in the space. Solid wood toe kicks, 3/4 inch thick, run along the front, giving a durable base area that visually ties into adjacent base cabinets using the same construction. Adjustable shelves on the interior let the cabinet handle different item heights, so the narrow width still provides flexible storage in a continuation of the Warmwood run.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, which locks rails and stiles together and helps keep reveals consistent, reducing the need for ongoing hinge adjustments due to joint movement. A flat panel plywood insert formed as a three-ply panel with a rotary cut hard maple veneer face resists warping compared with a solid slab, maintaining a flat door center that keeps the recessed profile crisp. Solid wood corner blocks that are glued and power nailed tie the cabinet box together at each inside corner, so the cabinet resists twisting when clamped in a run or when leveled on uneven floors. Solid wood hanging strips at the top and bottom create designated structural bands for fastening into wall framing, which helps maintain alignment between neighboring cabinets across the run. The plywood drawers use a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, supporting smooth drawer travel under load while keeping the slides anchored. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the Warmwood surfaces, building a finished layer intended to protect the maple faces in normal kitchen cabinet environments and present the Warmwood color consistently across the fronts.
The Kitchen Kompact WW15B Warmwood base cabinet measures 15 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet height and depth in typical kitchen layouts.
The cabinet uses maple flat panel doors with a recessed panel design, which provides a flat center profile framed by solid maple rails and stiles for a consistent Warmwood appearance.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, giving mechanically interlocked joints that support long-term door alignment in everyday kitchen use.
The Warmwood base cabinet uses concealed, self-closing hinges, so the hardware stays hidden from the front and the hinges pull the doors closed at the end of the swing.
The cabinet has plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, supporting smooth operation under stored loads.
The Warmwood cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a finished surface suited to typical kitchen cabinet environments.
The Kitchen Kompact 15 inch Warmwood base cabinet WW15B combines maple flat panel doors, mortised and tenoned solid 3/4 inch maple frames, and solid wood toe kicks, giving a consistent Warmwood look across a lower cabinet run. Solid wood corner blocks, solid wood hanging strips, and plywood drawers with an epoxy-coated front to back drawer system back up the cabinet box during layout and fastening. For projects using Kitchen Kompact Warmwood recessed panel fronts that need a 15 inch wide base unit, this cabinet provides a matching component to integrate into the line.
Sold In: 1 Each