Kitchen Kompact Warmwood base cabinet gives you a 21 inch wide, 34-1/2 inch high, 24 inch deep base cabinet built for kitchen installations where a standard footprint is needed. The recessed panel Warmwood style uses maple flat panel doors, so the face presents a consistent maple look that lines up cleanly with matching Kitchen Kompact units. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a solid frame that helps the door stay square on the cabinet over time. Maple flat panel doors pair with a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving the door center panel stable support with a maple veneer surface that visually matches the frame. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at key stress points where the cabinet is handled and set.
Solid wood hanging strips located on the top and bottom of the Kitchen Kompact base cabinet give installers defined fastening zones, so the cabinet can be drawn tight to the wall framing or neighboring cabinets with predictable grip. Adjustable shelves are built into the design, allowing shelf height to be set at different positions, which lets the installer or user stage stored items without modifying the cabinet box. The cabinet uses concealed, self-closing hinges on the maple flat panel doors, so door adjustment happens at the hinge inside the cabinet while keeping hardware hidden from the front view. The self-closing hinge action pulls the door closed from the last part of travel, which helps keep doors seated in line across a run of Warmwood 21 inch base cabinets. Plywood drawers are standard, with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, supporting smooth drawer movement along the depth of the cabinet.
This Kitchen Kompact base cabinet WW21B is sized at 21 inches wide, 34-1/2 inches high, and 24 inches deep, which fits typical kitchen base layouts where a 21 inch module is planned between other cabinets or appliances. The Warmwood 21B base cabinet uses maple flat panel doors with a recessed panel look, so it coordinates visually with other Warmwood pieces in the same Kitchen Kompact line for a continuous run. The solid wood toe kicks at 3/4 inch thickness form a sturdy lower front, which suits locations that see regular foot traffic in front of the cabinet. Solid wood corner blocks that are glued and power nailed add strength at cabinet corners, which supports positioning this cabinet at ends or transitions where the box may be carried, lifted, or bumped during kitchen work. Solid wood hanging strips at the top and bottom edges give installers firm anchoring points when tying this base into a straight, aligned row.
The door frames on this maple flat panel kitchen cabinet use mortised and tenoned construction in solid 3/4 inch maple, which helps keep the frame joints tight and square, so door reveals stay even along the cabinet face after installation. The flat panel plywood insert with a three-ply core and rotary cut hard maple veneer face stabilizes the center panel against typical movement while keeping the visible surface in maple, which supports a uniform Warmwood finish across multiple fronts. The 4 step finishing process of stain, sealer, sanding, and catalyzed top coat builds a layered finish system, so the surface resists everyday contact and cleaning common in kitchen use. Concealed, self-closing hinges on the Warmwood doors allow fine tuning of door alignment inside the cabinet, and the self-closing action settles doors into a consistent closed position, which helps keep the run looking straight over time. The plywood drawers with a front to back epoxy-coated drawer system, securely attached to a solid wood strip at the back of the cabinet, provide a guided motion path that supports repeatable drawer travel along the cabinet depth. Together with solid wood toe kicks and solid wood hanging strips, these construction choices support a base cabinet that aligns cleanly with adjacent units and stays stable once integrated into a kitchen layout.
The Kitchen Kompact Warmwood base cabinet measures 21 inches wide, 34-1/2 inches high, and 24 inches deep, which matches standard kitchen base cabinet sizing for typical counter and layout planning.
The Warmwood door frames are solid 3/4 inch maple with mortised and tenoned construction, giving the frame strong joints that help keep doors square and aligned in kitchen use.
The center panel is a flat panel plywood insert using a three-ply panel with a rotary cut hard maple veneer face, providing dimensional stability with a matching maple veneer surface.
The Kitchen Kompact Warmwood base cabinet uses concealed, self-closing hinges, so hinge hardware is hidden from the front while providing a self-closing action for the doors.
The drawers are plywood with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, supporting guided motion along the cabinet depth.
The Warmwood cabinet uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a layered finish suited to regular kitchen contact and cleaning.
The Kitchen Kompact Warmwood base cabinet WW21B offers a 21 inch wide, 34-1/2 inch high, 24 inch deep base with maple flat panel doors sized for standard kitchen runs. Mortised and tenoned solid 3/4 inch maple door frames and a three-ply flat panel plywood insert with hard maple veneer face provide a stable, maple-fronted door assembly that aligns with other Warmwood units. Solid wood hanging strips at the top and bottom and solid wood toe kicks at 3/4 inch thickness give you substantial structure where the cabinet fastens and meets the floor. With concealed, self-closing hinges, plywood drawers on an epoxy-coated drawer system, and a 4 step stain, sealer, sanding, and catalyzed top coat finish, this base cabinet is set up for integration into Kitchen Kompact Warmwood layouts that demand consistent sizing and appearance.
Sold In: 1 Each