Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact warmwood base cabinet provides a 24 inch wide by 34-1/2 inch high by 24 inch deep base unit that sets a consistent footprint for standard kitchen layouts and lets installers line up countertops, toe spaces, and adjacent cabinets on a predictable grid. The cabinet uses maple flat panel doors, so the face presents a maple grain surface that matches other maple casework and keeps door replacements straightforward when coordinating a room. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints at every corner that resist racking when doors are opened and closed repeatedly in a busy kitchen. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face fills each door opening, so the center panel stays stable while still showing a maple veneer that ties in with the frames and other maple components throughout the line.
The warmwood 24 inch base cabinet is built around maple flat panel doors, so the front face presents a recessed panel look that matches the Kitchen Kompact warmwood style across a kitchen run. Adjustable shelves inside the cabinet let the installer shift shelf height to work around plumbing, tall cookware, or small items, giving more control over interior organization. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, which stabilizes the drawer slides as they cycle in and out under everyday loading. Concealed, self-closing hinges are used on the maple flat panel doors, so the hinge hardware stays out of sight when the doors are closed while pulling the doors shut at the end of the swing.
The Kitchen Kompact 24 inch base cabinet in warmwood is a standard-width base unit, so it fits common cabinet runs where a 24 inch footprint is needed beneath a countertop. The cabinet stands 34-1/2 inches high, aligning with standard base heights that support countertop installation across multiple units. A depth of 24 inches matches typical countertop depth, so the front frame, drawers, and doors sit flush under most tops without stepped faces. Solid wood toe kicks at 3/4 inch thick provide a built-in lower front section that matches the cabinet structure and gives a firm surface where finish materials or trim can be applied. Maple, flat panel doors define the visible style, so this unit acts as both a structural base and a style element in a warmwood kitchen run.
The WW24B warmwood base cabinet uses solid wood hanging strips located on the top and bottom, so installers work with known fastening zones when tying the cabinet to wall studs or adjacent units, which helps keep runs straight and secure. Solid wood corner blocks that are glued and power nailed strengthen the joints between the face and sides, limiting cabinet racking during transport, set, and leveling steps. Plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet keep drawer movement guided along a fixed path, which reduces side loading on the drawer box during frequent use. The 4 step process of stain, sealer, sanding, and catalyzed top coat is applied to the maple veneer and solid maple components, building a consistent finish layer that supports clean-up routines and presents a unified warmwood color tone. Maple flat panel doors with a flat panel plywood insert keep the center panel stable while tying visually to the solid maple frames, which helps maintain a uniform appearance across multiple base cabinets installed in the same project.
The Kitchen Kompact warmwood base cabinet measures 24 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet and countertop layouts in kitchen installations.
The cabinet uses maple flat panel doors with door frames built from mortised and tenoned solid 3/4 inch maple and a flat panel plywood insert, which supports a stable recessed panel face.
The warmwood base cabinet uses plywood drawers and a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, which supports guided drawer travel.
The Kitchen Kompact base cabinet uses concealed, self-closing hinges on its maple flat panel doors, so the hardware stays hidden while drawing the doors shut at the end of travel.
The cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, which builds a protective finish film over the maple faces suited to normal kitchen environments.
The WW24B base cabinet uses solid wood hanging strips on the top and bottom and solid wood corner blocks that are glued and power nailed, supporting fastening and resisting racking.
The Kitchen Kompact warmwood 24W x 34-1/2H x 24D base cabinet, model WW24B, brings together maple flat panel doors, plywood drawers, and solid wood toe kicks in a single base unit sized for standard kitchen runs. Mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips give the cabinet a defined structure that suits row installation beneath continuous countertops. The flat panel plywood insert with rotary cut hard maple veneer and the 4 step stain, sealer, sanding, and catalyzed top coat system align finish and grain presentation with other warmwood casework, so this cabinet fits into coordinated kitchen layouts.
Sold In: 1 Each