Kitchen Kompact Warmwood base cabinet is a 12 inch wide, 34-1/2 inch high, 24 inch deep base cabinet that provides a compact storage and working base in a kitchen run. The cabinet is part of the Kitchen Kompact line, so it shares a coordinated style and construction with other cabinets in the same series, which helps maintain a consistent look across an installation. The Warmwood designation ties to the WARMWOOD 12B description, giving a defined finish option when laying out a job. A recessed panel design on the front gives a flat panel look that fits cleanly with the maple flat panel doors called out in the description.
Door frames use mortised and tenoned construction of solid 3/4 inch maple, so the door joints are mechanically interlocked as well as bonded, supporting alignment over time when the door is opened and closed repeatedly. Maple flat panel doors pair with a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, so the visible face presents a maple appearance that coordinates with the solid maple frame. The overall cabinet is a base cabinet format, which fits below counters in typical kitchen layouts.
This Kitchen Kompact 12 inch wide base cabinet uses concealed, self-closing hinges on the maple flat panel doors, so the hinge hardware stays hidden when the door is closed and the door is pulled shut at the end of travel. That hinge style supports a clean exterior line while giving a consistent closing action when the door is swung. Solid wood hanging strips located on the top and bottom provide defined attachment zones along the back, which can be aligned with wall structure when positioning the 34-1/2 inch high cabinet in a run.
Solid wood corner blocks that are glued and power nailed tie the case together at each corner, giving the 24 inch deep box stability as it is leveled and aligned next to neighboring cabinets. The solid wood toe kicks at 3/4 inch thickness form a solid lower front section, supporting the finished toe space when the cabinet is set on the floor. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer movement works with the installed cabinet body.
This Kitchen Kompact Warmwood base cabinet, identified as WARMWOOD 12B and WW12B, is designed as a 12 inch wide base unit in a kitchen layout, so it fits narrow base positions where storage and support under a countertop are required. The maple flat panel doors match the flat panel plywood insert with a rotary cut hard maple veneer face, which gives the visible front of the cabinet a continuous maple appearance across the door frame and center panel when it is part of a longer run.
Solid wood hanging strips on the top and bottom of the cabinet back provide continuous solid-wood zones along the rear, which supports alignment when the cabinet is drawn against studs or backing in a kitchen wall. Solid wood corner blocks that are glued and power nailed link the cabinet sides, front, and back at each corner, helping the 34-1/2 inch high box remain square when units are clamped together during layout. Solid wood toe kicks at 3/4 inch thickness provide a solid front edge at floor level, so the lower cabinet front lines up with neighboring Kitchen Kompact units in the same style.
The door frames on this maple flat panel base cabinet are mortised and tenoned construction of solid 3/4 inch maple, so each corner uses interlocking joinery that supports door squareness and stable hinge mounting over repeated cycles of opening and closing. The flat panel plywood insert uses a three-ply panel with a rotary cut hard maple veneer face, providing a maple veneer front that visually links to the solid maple frame and helps maintain a uniform appearance across adjacent doors.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, giving the cabinet finish a defined process that covers color application and top coating, which supports surface consistency across Warmwood WW12B units on the same job. Adjustable shelves inside the cabinet give installers and users the option to set different opening heights, adapting the 24 inch deep interior to various storage needs while still resting on the cabinet structure. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer motion works with the cabinet case during everyday operation. Concealed, self-closing hinges on the maple flat panel doors keep hinge hardware out of sight when the door is shut and draw the door closed at the end of travel, contributing to a clean front line and consistent closing action.
The Kitchen Kompact WW12B base cabinet is 12 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits narrow base positions in standard-height kitchen counter runs.
The WW12B door frames use solid 3/4 inch maple in mortised and tenoned construction, giving the door corners interlocking joinery that supports hinge stability and long-term door alignment.
The cabinet uses a flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face, plus solid wood corner blocks that are glued and power nailed to keep the case square.
The Kitchen Kompact Warmwood base cabinet uses concealed, self-closing hinges, so hinge hardware stays hidden when the door is shut and the door is pulled closed at the end of its swing.
The WW12B uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, supporting smooth movement tied to the cabinet case.
The Warmwood 12B cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, providing a defined finishing sequence for the cabinet surfaces.
The Kitchen Kompact Warmwood base cabinet WW12B combines a 12 inch width, 34-1/2 inch height, and 24 inch depth with solid 3/4 inch maple door frames, a maple flat panel door design, and a three-ply plywood insert with hard maple veneer face, giving a defined construction and appearance for narrow base positions. Solid wood corner blocks, solid wood hanging strips, solid wood toe kicks, plywood drawers, and a front to back epoxy-coated drawer system attached to a solid wood strip in the back of the cabinet all work with concealed, self-closing hinges and the 4 step process of stain, sealer, sanding and catalyzed top coat to deliver a coordinated Kitchen Kompact unit ready to match other Warmwood pieces in the same line.
Sold In: 1 Each