
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact warmwood base cabinet gives you a 36 inch wide, 34-1/2 inch high, 24 inch deep base cabinet that anchors a standard kitchen layout. The cabinet uses maple, flat panel doors so you get a warmwood look built on a cabinet-grade hardwood door face that suits many residential kitchens. The recessed panel style is created by a flat panel plywood insert, so the door presents a clean center field that ties in with other recessed panel components on the job.
The cabinet is built as a base unit, so its 34-1/2 inch height works in a run with standard countertops. The brand is Kitchen Kompact, which identifies the WW36RB warmwood model in the Kitchen Kompact cabinet line. The cabinet is classified in the Kitchen Kompact category, which keeps it consistent with other Kitchen Kompact components across a project.
This 36W x 34-1/2H x 24D base cabinet size positions easily in standard base runs, because the width and depth follow common kitchen layouts. Solid wood hanging strips located on the top and bottom give predictable fastening zones so installers can drive fasteners through wood when securing the cabinet to structure. Solid wood corner blocks that are glued and power nailed help the box maintain squareness while the unit is being leveled and aligned in relation to adjacent cabinets.
The solid wood toe kicks at 3/4 inch thick present a substantial toe space front, so the toe area holds its face when base trim and flooring are brought up to the cabinet. The 4 step process of stain, sealer, sanding and catalyzed top coat applied at the factory means the finish arrives as a completed warmwood surface, so on-site work focuses on setting, trimming and adjusting rather than finishing.
The Kitchen Kompact 36 inch base cabinet in warmwood recessed panel configuration functions as a primary storage and support unit in a base run. Maple, flat panel doors with a three-ply plywood insert using a rotary cut hard maple veneer face establish a consistent recessed panel look along the line, so this cabinet visually ties into other Kitchen Kompact warmwood pieces. The 36 inch width lets the WW36RB model serve under a broad counter area, while the 24 inch depth carries the top safely out to a standard front edge.
Plywood drawers standard in this base cabinet let the unit handle utensil or small-part storage in the same footprint as the door compartment, so one cabinet can combine drawer access with base storage depending on layout. Adjustable shelves inside the cabinet work with the full cabinet height of 34-1/2 inches under the counter, so installers and designers can set shelf spacing to match cookware or pantry items. Concealed, self-closing hinges on the doors keep the exterior of the maple, flat panel doors free from visible hinge barrels, supporting a cleaner face when multiple warmwood doors line up.
Mortised and tenoned construction of solid 3/4 inch maple door frames gives this WW36RB warmwood base cabinet rigid door corners, so hinge loads are carried by an interlocked joint rather than by simple butt connections. Solid wood corner blocks that are glued and power nailed at cabinet corners stabilize the box during leveling and shimming, reducing the tendency for twist while counters are being placed on top.
Solid wood hanging strips located on the top and bottom provide consistent fastening targets along the cabinet back, so installers can fasten through solid lumber instead of through panel-only sections. The plywood drawers use a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, so drawer movement is guided along coated runners anchored to structural wood. The 4 step process of stain, sealer, sanding and catalyzed top coat applied across the cabinet surfaces builds a finish system where color, sealed grain, and a hardened top coat are all in place, supporting a uniform warmwood tone from door to drawer front.
The Kitchen Kompact warmwood base cabinet is 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits typical base cabinet runs and supports standard countertop depths.
The cabinet uses maple, flat panel doors with a flat panel plywood insert, so it presents a recessed panel style that coordinates with other recessed panel cabinetry.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, so the corner joints interlock mechanically to support long-term hinge and handling loads.
The cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, so the warmwood surface has layered color, sealed grain and a hardened protective top film.
The plywood drawers use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, so the drawers ride on coated guides tied into solid wood.
The cabinet doors use concealed, self-closing hinges, so the hardware stays hidden when doors are shut and the doors are pulled into a consistent closed position.
The Kitchen Kompact warmwood base cabinet in the WW36RB configuration combines a 36W x 34-1/2H x 24D footprint with maple, flat panel recessed doors, so it slots into standard kitchen layouts with a defined warmwood look. Mortised and tenoned construction of solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips contribute to a box and door system built around hardwood structure. Adjustable shelves, plywood drawers with a front to back epoxy-coated drawer system, concealed self-closing hinges, and a 4 step process of stain, sealer, sanding and catalyzed top coat all work together to provide a configurable interior and finished exterior. Use this Kitchen Kompact maple base cabinet when a warmwood recessed panel base is needed in a 36 inch module.
Sold In: 1 Each