Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood sink base gives you a 30 inch wide, 34-1/2 inch high, 24 inch deep cabinet sized for standard kitchen sink layouts, so cabinet runs line up cleanly with common counter depths and working heights on residential jobs.
Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a mechanically interlocked joint that holds square under daily door cycling, which matters when you want doors to stay aligned after repeated use.
Maple flat panel doors with a recessed plywood insert bring a consistent, flat face to the sink area, helping installers tie this unit into surrounding Warmwood cabinets for a uniform front elevation.
Solid wood hanging strips located at the top and bottom of the cabinet provide continuous bearing for fasteners into wall framing, giving you a solid structural line when you are anchoring the cabinet into a run.
Solid wood toe kicks, 3/4 inch thick, form a rigid base at floor level, which supports the cabinet face and helps it stand up to normal foot contact along the kick space in busy kitchens.
Plywood drawers with a front to back epoxy-coated drawer system offer a stable slide track, and the system is securely attached to a solid wood strip at the back of the cabinet, helping the drawers run true under loaded use.
This Kitchen Kompact sink base is built at 30 inches wide, 34-1/2 inches high, and 24 inches deep, giving installers a standard cabinet footprint that pairs with typical countertop depths and front edge lines.
Solid wood hanging strips integrated at the top and bottom of the back let you fasten into framing across a continuous strip, helping the cabinet draw tight to uneven walls when you pull it into plane with adjacent units.
Solid wood corner blocks that are glued and power nailed tie the sides to the face and bottom, so the box holds its shape while you shim and level under a sink opening.
The 3/4 inch thick solid wood toe kicks form a sturdy lower front edge, which supports the cabinet face and keeps the toe space solid when the unit is set and scribed to the floor.
Plywood drawers guided by a front to back epoxy-coated drawer system, anchored to a solid wood strip in the back, give you a smooth operating storage area within the sink base, even when items are loaded in and out during regular use.
The Kitchen Kompact 30 inch wide, 34-1/2 inch high, 24 inch deep Warmwood sink base fits into standard kitchen layouts where a 30 inch sink opening is planned, matching typical base cabinet dimensions for continuous countertop installations.
The maple flat panel doors and rotary cut hard maple veneer center panels present a coordinated Warmwood face, which lets this sink base sit between other Kitchen Kompact Warmwood units while keeping the door style and tone consistent along the run.
Solid wood toe kicks at 3/4 inch thick tie visually and structurally into standard base lines, supporting the face frame at floor level while maintaining the same kick profile kitchen-wide.
Inside, plywood drawers with the epoxy-coated front to back system give functional storage in the sink base area, helping organize smaller items while maintaining the same drawer action as other matching cabinets.
Solid wood hanging strips on the top and bottom edges of the back panel let installers place fasteners across a wider span, which is useful when this sink base must be aligned tightly between neighboring cabinets and wall conditions.
Mortised and tenoned solid 3/4 inch maple door frames supply a strong joint at each corner of the door, so hinge loads are carried through solid material, helping doors track correctly on the concealed, self-closing hinges over repeated cycles.
The flat panel plywood insert, built as a three-ply panel with a rotary cut hard maple veneer face, provides a balanced construction, which supports a consistent finish surface across the Warmwood color system used on matching Kitchen Kompact cabinets.
A 4 step finishing process of stain, sealer, sanding, and catalyzed top coat is applied, creating a layered finish system that works with the maple and veneer surfaces for an even appearance around the sink opening.
Solid wood corner blocks that are both glued and power nailed reinforce interior corners of the cabinet, helping the box remain square while you clamp faces and pull the unit into line during installation runs.
The plywood drawers, riding on a front to back epoxy-coated drawer system secured to a solid wood strip at the back, give a stable slide path that supports repeated opening and closing when the sink base is part of the primary work zone.
Concealed, self-closing hinges draw the maple doors back to the face frame consistently, which reduces the need for readjusting door positions after normal everyday use in the kitchen.
The Kitchen Kompact Warmwood sink base measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet and countertop depth layouts in typical kitchens.
The doors use mortised and tenoned solid 3/4 inch maple frames with a flat panel plywood insert, giving a strong frame and stable panel for consistent alignment and finish appearance.
The sink base uses plywood drawers on a front to back epoxy-coated drawer system securely attached to a solid wood strip, supporting smooth, stable drawer movement during everyday use.
The maple flat panel doors use concealed, self-closing hinges, keeping the hardware hidden from the front while returning doors to a consistent closed position along the sink base.
Solid wood hanging strips at the top and bottom of the cabinet back offer continuous fastening surfaces, helping the sink base pull tight to wall studs and align with nearby cabinets.
The Warmwood sink base receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, producing a coordinated Warmwood finish suited to typical kitchen environments.
The Kitchen Kompact Warmwood sink base WW30RBS provides a 30 inch wide, 34-1/2 inch high, 24 inch deep cabinet with mortised and tenoned maple doors, plywood drawers, and solid wood structural elements suited to standard kitchen sink layouts.
For projects using the Warmwood style, this cabinet offers coordinated maple flat panel doors, a three-ply hard maple veneer center panel, concealed self-closing hinges, and a multi-step finish system that align visually across matching Kitchen Kompact installations.
Sold In: 1 Each