Kitchen Kompact Warmwood sink base cabinet WW42RBS is a 42 inch wide, 34-1/2 inch high, 24 inch deep cabinet built for mounting a kitchen sink while providing storage and support in a standard base run. The Warmwood sink base uses maple, flat panel doors so the face presents a maple appearance suited to projects calling for a recessed panel look. Door frames use mortised and tenoned construction of solid 3/4 inch maple, giving each corner a mechanically interlocked joint that helps the doors stay square during everyday opening and closing. Solid wood corner blocks are glued and power nailed, tying cabinet sides and face together to help the box resist racking when the sink and countertop load the front edge. Solid wood toe kicks are 3/4 inch thick, so the front base stands up to foot contact along busy work areas.
The Warmwood 42 inch sink base cabinet provides a 42 inch wide footprint, 34-1/2 inch height, and 24 inch depth, aligning with common base cabinet and countertop layouts. Solid wood hanging strips on the top and bottom of the back of the cabinet create predictable fastening lines when positioning the unit in a base run. Solid wood corner blocks that are glued and power nailed help the cabinet remain square as it is aligned with adjacent cabinets and leveled beneath a countertop. Concealed, self-closing hinges on the doors streamline door swing inside face frames and keep door travel controlled once installed. Plywood drawers with a front to back epoxy-coated drawer system attach securely to a solid wood strip in the back of the cabinet, supporting drawer motion after the cabinet is set in place.
The Kitchen Kompact Warmwood sink base cabinet is designed as a base cabinet sized at 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits into layouts calling for a wider sink center section. Maple, flat panel doors provide a recessed panel look that matches other Warmwood cabinets in the same product class, allowing this sink base to sit between adjoining units with a consistent face style. The flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face presents a hard maple veneer surface, aligning with other maple-faced elements in a kitchen. Solid wood toe kicks at 3/4 inch thick give the front base area substance when this sink cabinet transitions to adjacent base units along the floor line.
Mortised and tenoned construction of solid 3/4 inch maple door frames provides a defined shoulder at each joint, which helps the maple, flat panel doors keep their shape and alignment as hinges cycle. Concealed, self-closing hinges bring the doors shut without exposed hinge hardware on the exterior, useful when aligning multiple fronts across a kitchen run. The 4 step process of stain, sealer, sanding, and catalyzed top coat gives the Warmwood surface a complete finishing sequence, supporting a uniform appearance where several cabinets meet. Adjustable shelves inside the cabinet let the installer position shelf height to suit plumbing clearances or storage needs, using the provided adjustment positions. Plywood drawers use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet, which supports repeatable drawer travel along its guides after installation.
The Kitchen Kompact Warmwood sink base WW42RBS measures 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet and countertop depths and heights.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints that help the doors stay square during repeated opening and closing.
Each door uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving a maple-faced recessed center panel.
The Warmwood sink base uses solid wood corner blocks that are glued and power nailed, tying cabinet sides and front together to resist racking under load.
The cabinet uses concealed, self-closing hinges, so the hinges stay hidden from the front and the doors are pulled closed at the end of travel.
The cabinet has plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, supporting smooth drawer movement.
The Kitchen Kompact Warmwood sink base cabinet WW42RBS combines a 42 inch wide footprint with maple, flat panel doors and a three-ply plywood panel with rotary cut hard maple veneer face, so it matches Warmwood styling in a sink location. Mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and 3/4 inch solid wood toe kicks provide a structural cabinet for carrying a sink and countertop in a run. Concealed, self-closing hinges, adjustable shelves, and plywood drawers with an epoxy-coated drawer system attached to a solid wood strip in the back support daily use. Choose this Warmwood 42 inch sink base when a maple-faced recessed panel sink cabinet is needed within a Kitchen Kompact Warmwood layout.
Sold In: 1 Each