Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood base cabinet GW30B is a 30 inch wide, 34-1/2 inch high, 24 inch deep base cabinet built for everyday kitchen use. This recessed panel cabinet uses frames made of solid 3/4 inch oak, maple, or beech, so the face frame handles door and drawer loads with a solid hardwood structure that supports repetitive opening and closing. The Glenwood 30B design uses solid wood corner blocks that are both glued and power nailed, which ties cabinet corners together so the box resists racking when the base is set, shimmed, and fastened in a run. Solid wood toe kicks, 3/4 inch thick, carry vertical loads at the floor line, so the front of the cabinet stays stable as flooring transitions and daily use add pressure at the base. Solid wood hanging strips on this base cabinet, located at the top and bottom, provide firm zones for fastening to wall studs along the back.
This Kitchen Kompact 30 inch Glenwood base cabinet uses solid wood hanging strips on the back, located at the top and bottom, so installers have two continuous fastening zones when tying the cabinet into wall studs. That layout supports drawing the cabinet flush to uneven walls while keeping fasteners in solid material. The solid wood 3/4 inch toe kicks at the front give a consistent structural surface at the floor, which helps when shimming under the cabinet to establish level across a run. Solid wood corner blocks, glued and power nailed, keep the case square as clamps and screws pull units together side-to-side, reducing twist as countertops are set. The 30 inch width, 34-1/2 inch height, and 24 inch depth match common base cabinet dimensions, which supports layout with adjacent pieces in standard kitchen runs.
The Glenwood 30B base cabinet sits at 34-1/2 inches high and 24 inches deep, which fits typical kitchen counter height and depth, so it serves as a standard base unit in a run of Kitchen Kompact cabinets. With a 30 inch overall width, this cabinet fills a common layout space between other bases or under a stretch of countertop, providing a central storage bay in the lower section of the kitchen. Frames built from solid 3/4 inch oak, maple, or beech make the front rail and stile assembly suitable for carrying typical base cabinet doors and any internal loads those doors transfer. End panels using 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers give the cabinet sides a stable structure that supports countertop weight while presenting a hardwood veneer surface for exposed ends in visible kitchen locations.
Mortise and tenon joints on each kiln-dried rail, glued for added strength, keep the Kitchen Kompact Glenwood base cabinet frame tight, so doors hung on that frame operate on a stable reference plane over time. Solid wood corner blocks that are both glued and power nailed tie the cabinet box together, helping it resist racking forces during transport, handling, and fastening to walls or neighboring cabinets, which reduces the need for field adjustments after counters are installed. Solid wood hanging strips at the top and bottom of the back provide consistent fastening paths into studs, so installers can pull the cabinet flush and level without relying on thin panel stock. The 3-ply end panels with 1/2 inch engineered wood core and hardwood veneers balance strength and appearance, so case sides stay true while still matching surrounding wood surfaces. Solid 3/4 inch toe kicks at the base anchor the front of the cabinet at floor level, supporting the vertical load path from countertop and stored contents into the floor structure.
The Glenwood 30B base cabinet measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet and countertop layouts in typical kitchens.
The Kitchen Kompact frame is built of solid 3/4 inch oak, maple, or beech, giving the face frame a hardwood structure that holds hinges and fasteners and supports frequent door operation.
The Glenwood cabinet rails are kiln-dried, joined by mortise and tenon, and then glued, producing tight joints that help the frame stay square as cabinets are aligned and fastened together.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable cabinet sides with a hardwood veneer surface for visible ends.
The solid wood hanging strips on wall and base cabinets, located at the top and bottom, offer continuous solid fastening zones into wall studs for a secure installation.
The solid wood toe kicks are 3/4 inch thick, so they support the front of the cabinet at floor level and carry vertical loads from the cabinet and contents into the floor.
The Kitchen Kompact Glenwood 30B base cabinet combines a solid 3/4 inch hardwood frame, mortise and tenon jointed rails, and 3-ply engineered end panels with hardwood veneers to support everyday kitchen use. Solid wood corner blocks, glued and power nailed, keep the case rigid as it is fastened into a run, while solid wood hanging strips at the top and bottom of the back provide clear fastening zones into wall studs. With standard base dimensions of 30 inches wide, 34-1/2 inches high, and 24 inches deep, this recessed panel cabinet fits into common layouts when building continuous Kitchen Kompact Glenwood bases.
Sold In: 1 Each