Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact base cabinet Glenwood 48B is a 48 inch wide, 34-1/2 inch high, 24 inch deep Glenwood base cabinet designed as a recessed panel unit for kitchen layouts that need a full-width base. The cabinet uses frames built of solid 3/4 inch oak, maple, or beech, which provides a rigid front structure for aligning doors and drawer fronts across a run. Each rail in the frame is kiln-dried, joined by mortise and tenon, and then glued, creating tight joints that support daily door use. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at the corners to help the case stay square during installation and over time. Solid wood hanging strips on the base cabinet are located at the top and bottom, giving defined fastening areas for securing the cabinet to the wall and maintaining alignment.
This Kitchen Kompact base cabinet measures 48 inches wide, 34-1/2 inches high, and 24 inches deep, giving a standard base footprint that integrates into typical kitchen counter runs. The solid wood toe kicks, 3/4 inch thick, create a continuous support strip at the floor that carries cabinet and countertop loads along the front edge. Solid wood hanging strips on the base cabinet are located at the top and bottom, so fastening can follow those strips for consistent mounting along wall studs. Frames built of solid 3/4 inch oak, maple, or beech form a stable front reference line, helping the installer align adjacent cabinets and set a straight plane for doors and countertops.
The Glenwood 48B base cabinet is a 48 inch wide, 34-1/2 inch high, 24 inch deep unit suited to runs that need a wide base section in a kitchen layout. Its recessed panel design defines the style of the visible front, aligning with Glenwood recessed panel door themes. Frames built of solid 3/4 inch oak, maple, or beech create a strong face for edge-to-edge support across the 48 inch span, which is useful where a longer stretch of base cabinet is required. End panels built with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers give the cabinet flat sides, supporting use at ends of runs or against adjacent cabinets where a smooth outside surface is important.
Each rail on this Kitchen Kompact Glenwood cabinet is kiln-dried, joined by mortise and tenon, and then glued, producing consistent joint geometry that helps doors hang evenly along the frame over time. Solid wood corner blocks that are glued and power nailed pull the corners tight and help the box keep its squareness, which supports accurate countertop scribing and reduces adjustment after setting the cabinet. Solid wood hanging strips, located at the top and bottom of the base cabinet, provide predictable fastening points so installers can anchor the unit in line with wall structure while maintaining cabinet alignment. Solid wood toe kicks, 3/4 inch thick, give a firm, continuous support line at the floor, which helps distribute loads and maintain a straight toe profile along longer cabinet runs.
The Glenwood 48B base cabinet measures 48 inches wide, 34-1/2 inches high, and 24 inches deep, which fits standard kitchen counter depth and height.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving the front structure stiffness that helps maintain door and drawer alignment.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating tight, durable joints that support repeated door use across the frame.
The cabinet uses solid wood toe kicks that are 3/4 inch thick, providing a strong front support line that carries cabinet and countertop loads to the floor.
Cabinet corners use solid wood corner blocks that are glued and power nailed, helping the box stay square during handling and after installation.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving flat, stable sides with a hardwood-faced exterior.
The Kitchen Kompact base cabinet Glenwood 48B combines a 48 inch width, 34-1/2 inch height, and 24 inch depth with frames built of solid 3/4 inch oak, maple, or beech, supporting straight, aligned runs. Mortise-and-tenon, kiln-dried, glued rails, along with solid wood corner blocks, toe kicks, and hanging strips, create a stable case that supports daily kitchen use. For projects using the Glenwood recessed panel look and needing a wide base section, this cabinet provides defined structural details that support layout, fastening, and long-term alignment.
Sold In: 1 Each