Kitchen Kompact Glenwood base cabinet in model GW42B is a 42 inch wide, 34-1/2 inch high, 24 inch deep base unit built for standard kitchen layouts where a wide cabinet footprint is needed. The Glenwood design uses a recessed panel style, so the face presents clean lines that match recessed panel Glenwood runs. All frames are built of solid 3/4 inch oak, maple, or beech, which provides a hardwood face structure that holds hinges and doors firmly under daily use. Each rail is kiln-dried, then joined by mortise and tenon and glued, so the front frame resists twisting at installation and during service. This GW42B cabinet sits at typical base height, tying into standard countertop and toe space dimensions, which helps maintain a consistent working surface and toe clearance across the run.
This Kitchen Kompact 42 inch wide Glenwood base cabinet is sized at 34-1/2 inches high and 24 inches deep, so it fits standard base cabinet and countertop depth layouts in typical kitchens and work areas. The solid wood toe kick with 3/4 inch thickness supports the front edge where the cabinet meets the floor plane, which is important when leveling and shimming runs. Solid wood hanging strips are placed at the top and bottom of the cabinet, providing defined structural zones for fastening into wall studs or into neighboring cabinet frames during installation. The engineered 1/2 inch core end panels with hardwood veneers give stable side walls that work well when scribing or aligning to adjacent structures while keeping the visible exterior in a hardwood finish face.
The Kitchen Kompact Glenwood 42B base cabinet is a recessed panel unit sized for 42 inch wide base positions in kitchen runs where a continuous countertop is planned. Its 34-1/2 inch height and 24 inch depth match standard base cabinet dimensions, so it integrates into common residential kitchen layouts and similar work areas. All frames are built of solid 3/4 inch oak, maple, or beech, so the front face of the cabinet aligns with other hardwood-framed units in Kitchen Kompact installations, keeping a consistent appearance along Glenwood recessed panel lines. End panels use a 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, so each side panel presents a hardwood-veneered exterior while the core adds dimensional stability where the cabinet meets adjacent cabinets or walls.
The Glenwood 42B base cabinet uses rails that are kiln-dried, joined by mortise and tenon, and then glued, so the front frame remains rigid while being clamped, leveled, and fastened in a run, helping maintain even gaps at doors and drawer fronts over time. Solid wood corner blocks are glued and power nailed, which strengthens each interior corner and helps the box stay square under countertop loads and dynamic kitchen use. Solid wood toe kicks at 3/4 inch thickness create a solid lower front member that performs well when shimming or leveling along uneven floors, supporting the cabinet face as adjustments are made. Solid wood hanging strips on wall and base cabinets are located at the top and bottom, giving installers clear hardwood fastening areas for driving fasteners into studs or neighboring frames, which helps tie the cabinet securely into the overall assembly. The 3 ply end panels with engineered wood core and hardwood veneers support stable alignment and a hardwood show face, which simplifies fitting the cabinet into straight or slightly irregular wall conditions while maintaining a Glenwood recessed panel appearance.
The Kitchen Kompact Glenwood 42B base cabinet is 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet and countertop depth layouts in typical kitchen installations.
The Glenwood base cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a hardwood structure that supports hinge attachment and alignment with adjoining cabinets.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, which produces rigid joints that help keep the face frame square and door reveals stable during use.
End panels consist of 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing a stable, hardwood-veneered side wall for alignment and finishing.
The solid wood toe kick is 3/4 inch thick, giving a strong lower front member that supports leveling, shimming, and floor contact along the base of the cabinet.
Solid wood hanging strips on wall and base cabinets are located at the top and bottom, offering defined fastening zones when tying the cabinet into studs or adjoining units.
The Kitchen Kompact Glenwood 42B base cabinet combines a 42 inch width, 34-1/2 inch height, and 24 inch depth with a recessed panel design, so it fits standard base positions while matching Glenwood styling. Solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise and tenon rails, and solid wood corner blocks give a rigid structure that supports countertop loads and hardware. Solid wood toe kicks and top-and-bottom hanging strips add clear structural points for leveling and fastening in kitchen projects that use Kitchen Kompact Glenwood components.
Sold In: 1 Each