Kitchen Kompact Glenwood base cabinet GW33B is a 33 inch wide, 34-1/2 inch high, 24 inch deep base cabinet built for standard kitchen layouts, so it fits common base runs and keeps countertop height consistent across the project. The Glenwood style uses a recessed panel design, which gives a clean, straightforward look that works well in many residential kitchen plans where simple lines matter. All frames are built of solid 3/4 inch oak, maple, or beech, so the load is carried by hardwood rather than thinner composite, which helps the cabinet stand up to everyday use. This cabinet is part of the Kitchen Kompact line, so it matches other Kitchen Kompact pieces by construction method and materials for a unified run.
This Kitchen Kompact 33 inch wide base cabinet is 34-1/2 inches high and 24 inches deep, aligning with standard countertop and appliance depths so runs tie together cleanly. The solid wood hanging strips on base cabinets are located at the top and bottom, providing defined fastening zones to pull the cabinet tight to wall studs as adjoining cabinets are clamped and aligned. Solid wood toe kicks at 3/4 inch thickness give a sturdy front edge at floor level, which supports shims and scribing where floors are uneven. Solid wood corner blocks that are glued and power nailed help the cabinet hold its shape while it is leveled and fastened into place between other units.
The Kitchen Kompact Glenwood 33B base cabinet, at 33 inches wide, works in base runs that need a mid-width cabinet between wider sink units and narrower fillers or drawer bases. Its 34-1/2 inch height is set for standard kitchen countertop height when combined with typical countertop thickness, so work surfaces line up across adjacent cabinets. With a 24 inch depth, the cabinet aligns with other standard-depth base units and common kitchen appliances, helping keep fronts and finished panels on the same plane. End panels built with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers provide stable cabinet sides that can be exposed at the end of a run or positioned between other cabinets without telegraphing minor movement into door and drawer reveals. Solid wood hanging strips at the top and bottom of the base cabinet body allow fastening into framing at multiple heights, which is useful when tying several cabinets together along a wall. Solid wood toe kicks at 3/4 inch thickness give a defined base line at the floor for runs that transition around corners or into toe spaces.
All frames on this Kitchen Kompact Glenwood base cabinet are built of solid 3/4 inch oak, maple, or beech, so hinges and door loads are carried by hardwood face frames that resist splitting and hold fasteners firmly during repeated use. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating a traditional mechanically interlocking joint that helps keep the frame square as doors are adjusted and opened over time. Solid wood corner blocks that are glued and power nailed tie the face frame, sides, and bottom together, limiting racking when the cabinet is pushed, leveled, or loaded with typical kitchen contents. Solid wood hanging strips on base cabinets, located at the top and bottom, provide robust anchoring points so fasteners bite into hardwood rather than only into panel material, which supports long-term alignment in a full cabinet run. End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving dimensional stability that helps minimize warping while still presenting a hardwood veneer surface for visible ends. Together, these construction details support a cabinet box that stays square and aligned, which simplifies door and drawer operation and helps maintain consistent reveals after installation.
The Kitchen Kompact Glenwood GW33B base cabinet is 33 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet and countertop layouts in typical kitchens.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a hardwood structure that supports hinge loads and everyday use without relying on thinner composite framing.
Each rail on the Glenwood base cabinet is kiln-dried, joined by mortise and tenon, and then glued, creating rigid joints that help the frame stay square after installation and under regular use.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable sides with a hardwood surface suited for exposed cabinet ends.
The Kitchen Kompact base cabinet has solid wood hanging strips located at the top and bottom, providing two solid fastening zones when anchoring cabinets to wall framing.
The 3/4 inch thick solid wood toe kick gives a sturdy front base for shimming and scribing at the floor, which helps level the cabinet and align adjacent units.
The Kitchen Kompact Glenwood 33 inch base cabinet GW33B combines a solid 3/4 inch hardwood frame, mortise and tenon rail joints, solid wood corner blocks, and 3/4 inch thick solid wood toe kicks, so the cabinet supports typical kitchen loads and leveling work. Solid wood hanging strips located at the top and bottom of the base cabinet body give defined fastening points that help pull the unit tight to framing and align it alongside neighboring cabinets. With 3-ply end panels using a 1/2 inch thick engineered wood core and hardwood veneers, the cabinet sides stay stable while presenting hardwood surfaces for visible ends. Put this Glenwood 33B base cabinet into standard-height, 24 inch deep base runs where a 33 inch opening suits your layout.
Sold In: 1 Each