Kitchen Kompact Glenwood wall cabinet describes a Kitchen Kompact 36 in wide, 36 in high, 12 in deep wall cabinet that provides an upper storage run sized for standard kitchen layouts. The cabinet uses a recessed panel Glenwood design, so it matches installations calling for that specific style line. All frames are built of solid 3/4 in oak, maple, or beech, which gives the face frame substantial rigidity during handling, hanging, and daily use. Each rail is kiln-dried, which stabilizes the lumber before machining and assembly so the frame stays truer after installation. The rails are joined by mortise and tenon and then glued, forming a mechanical joint that keeps corners tight when the cabinet is fastened on the wall. Solid wood corner blocks are glued and power nailed, tying the frame to the case to resist racking when doors are operated.
The Kitchen Kompact 36 inch wall cabinet uses solid wood hanging strips on wall cabinets located at the top and bottom, giving installers two continuous structural bands for screw placement into framing. This layout supports even load transfer along the back of the cabinet when tying multiple units into a run. End panels consist of 3-ply construction with a 1/2 in thick engineered wood core and hardwood veneers, so the sides remain dimensionally stable while still providing a hardwood-facing surface for exposed ends. Solid wood corner blocks that are glued and power nailed lock the frame to the sides, keeping the box square as it is positioned, clamped, and fastened. The overall 36 in width, 36 in height, and 12 in depth format fits standard upper cabinet proportions used in many kitchen designs.
The GW36WT Glenwood wall cabinet is a Kitchen Kompact unit sized at 36 in wide, 36 in high, and 12 in deep, so it works as a core upper cabinet in many straight and L-shaped runs. The recessed panel Glenwood style matches projects that specify this Kitchen Kompact look, supporting visual continuity when combining wall and base units from the same product class. All frames are built of solid 3/4 in oak, maple, or beech, providing a hardwood face frame that handles repeated door use and contact from adjacent appliances. End panels use 3-ply construction with a 1/2 in thick engineered wood core and hardwood veneers, creating a stable cabinet side that still presents a hardwood veneer surface along exposed walls or over appliances. Solid wood toe kicks, 3/4 in thick, define the matching base cabinet geometry in the line, helping designers coordinate wall and base cabinets within a single Glenwood series.
This Kitchen Kompact recessed panel cabinet relies on kiln-dried rails, joined by mortise and tenon and then glued, so the face frame joints start from stabilized stock and a mechanically interlocked connection. That joint method keeps the frame tight when the wall cabinet is pulled into alignment with neighboring units along a rail or ledger. Solid wood corner blocks that are glued and power nailed tie the frame and case together, resisting racking loads during lifting, clamping, and fastening into studs. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, define clear fastening zones for installers, supporting consistent screw placement patterns across a whole run. End panels with 3-ply construction, using a 1/2 in thick engineered wood core with hardwood veneers, balance strength and stability, helping the cabinet maintain alignment where sides meet filler strips, adjacent cabinets, or finished end panels.
The Kitchen Kompact Glenwood wall cabinet is 36 in wide, 36 in high, and 12 in deep, so it matches common upper cabinet sizing used in many kitchen layouts.
The cabinet frame uses solid 3/4 in oak, maple, or beech, giving the face frame hardwood strength that supports door use and handling during installation.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating an interlocking frame joint that helps keep corners tight in service.
The wall cabinet uses solid wood hanging strips located at the top and bottom, providing structural bands for fastening into wall framing.
End panels use 3-ply construction with a 1/2 in thick engineered wood core and hardwood veneers, offering a stable side with a hardwood veneer surface.
Solid wood corner blocks are glued and power nailed, tying the frame to the case and helping the cabinet resist racking during handling and use.
The Kitchen Kompact 36 inch wall cabinet with recessed panel Glenwood styling combines solid 3/4 in hardwood frames, mortise and tenon glued joints, and solid wood corner blocks to form a rigid upper unit. Solid wood hanging strips at the top and bottom, along with 3-ply end panels using a 1/2 in engineered wood core and hardwood veneers, support a stable, straight installation. For projects built around the Glenwood line, this GW36WT wall cabinet provides a standardized 36 in by 36 in by 12 in format that fits typical upper runs in kitchen layouts.
Sold In: 1 Each