Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet GW12WT is a 12 inch wide, 36 inch high, 12 inch deep wall unit built for kitchen runs that need a narrow upper cabinet. The Glenwood style uses a recessed panel door look, which keeps the cabinet line visually clean while providing defined framing around the panel. As part of the Kitchen Kompact cabinet line, this wall cabinet is designed as a kitchen cabinet component that ties into other Kitchen Kompact pieces in the same series and height, which matters when laying out continuous wall rows. The wall configuration lets this cabinet mount above counters or appliances, giving usable storage in tight 12 inch wide sections without changing standard wall height. The 12 inch depth matches typical upper cabinet runs, so this unit fits into standard layouts while keeping projection off the wall consistent along the run.
This Glenwood wall cabinet is specified at 12 inches wide, 36 inches high, and 12 inches deep, so it fits narrow upper runs while maintaining a full 36 inch wall height. That size is useful when filling small gaps between other cabinets or at the end of a run where a full width cabinet will not fit. Solid wood hanging strips are located at the top and bottom of the wall cabinet, giving two structural bands to accept fasteners into wall framing. Those hanging strips distribute cabinet load into solid wood rather than just side panels, which supports a straighter installation line when several wall cabinets are ganged together. The 12 inch depth keeps this unit aligned with typical upper cabinet depths, which matters for keeping fronts in a straight plane.
The Kitchen Kompact Glenwood 12 inch wall cabinet fits into upper cabinet runs that require a narrow unit at 36 inches high. With its 12 inch width, it can occupy tight wall spaces where a wider cabinet would conflict with a window, hood, or wall transition. The 12 inch depth keeps the unit in line with standard upper cabinet projections, which supports a smooth front face along the entire run. As a Kitchen Kompact cabinet in the Glenwood design, the recessed panel styling coordinates with other Glenwood base and wall cabinets, helping keep a consistent door style from wall units down to toe kicks. Because the cabinet is configured as a wall cabinet, it is suited for mounting above counters or appliances, contributing enclosed storage without occupying floor area. The solid wood hanging strips at the top and bottom give clear mounting zones that align with typical stud layouts along the wall, which supports more flexible placement across different wall conditions.
The frame of this Glenwood wall cabinet is built from solid 3/4 inch oak, maple, or beech, so the front face that carries door hinges and reveals is based on hardwood stock rather than thinner materials. That solid frame helps keep hinge alignment more stable over time, which is important when several cabinets are installed side by side and door gaps need to stay uniform. Each frame rail is kiln dried, joined with a mortise and tenon, and then glued, giving an interlocking hardwood joint that resists seasonal movement and racking, which matters when the cabinet is loaded and doors are used repeatedly. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box stays square while being handled, lifted, and set into place, which supports cleaner alignment when upper cabinets are leveled in a line. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide dimensional stability in the cabinet sides, while still presenting a hardwood veneer surface on exposed ends that coordinates with the solid wood frame. Solid wood hanging strips on wall and base cabinets, positioned at top and bottom, give consistent fastening zones that installers can rely on when planning screw locations into studs, supporting repeatable mounting across multiple cabinets in a kitchen run.
The Kitchen Kompact Glenwood GW12WT wall cabinet measures 12 inches wide, 36 inches high, and 12 inches deep, so it fits standard 36 inch upper runs while occupying a narrow 12 inch wall section.
The cabinet frame is built from solid 3/4 inch oak, maple, or beech, providing a hardwood structure at the front where doors hang and daily opening and closing forces are carried.
The frame rails are kiln dried, then joined with mortise and tenon joints and glued, creating a tight, interlocking connection that supports square corners and stable door alignment.
This wall cabinet uses solid wood hanging strips at the top and bottom, giving defined structural bands for fastening into wall framing during installation.
The cabinet corners use solid wood corner blocks that are glued and power nailed, adding bracing that helps the box resist racking when handled and mounted in place.
The end panels have 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving stable sides with a hardwood veneer surface for exposed ends.
The Kitchen Kompact Glenwood 12 inch by 36 inch by 12 inch wall cabinet GW12WT pairs a recessed panel style with solid wood frame construction for upper kitchen runs that need a narrow unit. The solid 3/4 inch hardwood frame, kiln dried mortise and tenon rails, and solid wood corner blocks give the front and box structure needed for stable door alignment under repeated use. Solid wood hanging strips at the top and bottom and 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers support straightforward mounting and stable sides. For kitchen layouts that call for a 12 inch wide, 36 inch high wall cabinet in the Glenwood style from Kitchen Kompact, this unit provides that specific size and construction profile.
Sold In: 1 Each