Kitchen Kompact Glenwood wall cabinet gives you a 27 inch wide, 36 inch high, 12 inch deep upper cabinet sized for standard kitchen wall layouts. This format creates a familiar footprint, which helps when aligning with adjacent wall and base cabinets during a run. The Glenwood model uses a recessed panel style, so the door profile presents a clean, framed look that works well in many kitchen layouts. All frames are built of solid 3/4 inch oak, maple, or beech, so the front structure that carries the doors is cut from solid wood, not a thin facing. That solid frame construction supports repeated door use over time in a busy kitchen. The cabinet is part of the Kitchen Kompact line, so it follows consistent construction details across matching pieces, which helps when building a coordinated kitchen.
This Glenwood wall cabinet measures 27 inches wide, 36 inches high, and 12 inches deep, so it fits common wall cabinet zones above base cabinets and work surfaces. That depth keeps the unit within typical countertop overhangs, which helps maintain workable counter space below. Solid wood hanging strips on the wall cabinet run at the top and bottom, giving two strong mounting bands that carry cabinet and contents weight into the wall structure. With the frame built of solid 3/4 inch oak, maple, or beech, the front of the cabinet ties firmly into the box, so door forces transfer into the cabinet body rather than stressing a thin facing.
The Kitchen Kompact Glenwood wall cabinet is designed as a 27 inch wide, 36 inch high, 12 inch deep wall unit, so it suits upper cabinet rows over standard base cabinets in many kitchen layouts. That 36 inch height works in common installations where the wall cabinets start above a backsplash zone, creating vertical storage without crowding typical ceiling heights. The 12 inch depth keeps the front edge back from the countertop front, which leaves working room for hands and tools at the counter. End panels built with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers give the cabinet sides a stable structure, which helps when butting this unit to other Kitchen Kompact pieces in a run. The recessed panel Glenwood design provides a framed door look, so this cabinet visually matches other Glenwood units used around cooking or sink areas.
Each rail in the cabinet frame is kiln-dried, joined by mortise and tenon, and then glued, so the joints lock the frame into a square assembly that resists movement under load. That joint structure helps keep doors aligned and gaps even after repeated use. Solid wood corner blocks that are glued and power nailed connect the cabinet sides to the front and back, tying the box together so it stays rigid when lifted into place and fastened through the hanging strips. Solid wood hanging strips on wall cabinets run at the top and bottom, giving clear, solid targets for fastener placement during mounting, which supports predictable alignment across multiple units. End panels using 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers combine dimensional stability with a hardwood face, so the cabinet sides stay flatter along a wall, reducing adjustment time when lining up doors and face frames in a row of Glenwood cabinets.
The Kitchen Kompact Glenwood wall cabinet measures 27 inches wide, 36 inches high, and 12 inches deep, which suits typical upper cabinet rows above standard kitchen base cabinets.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, so the front structure is solid wood, supporting repeated door use and normal kitchen loading.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating tight, strong joints that help keep the frame square once the wall cabinet is installed.
The end panels have 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable cabinet sides with a hardwood appearance.
The Glenwood wall cabinet uses solid wood hanging strips located at the top and bottom, providing strong mounting bands to transfer cabinet load into the wall.
Solid wood corner blocks are glued and power nailed at the corners, tying the cabinet sides together so the box resists twisting under normal loading and wall mounting.
The Kitchen Kompact Glenwood wall cabinet in the GW27WT size gives you a 27 inch wide, 36 inch high, 12 inch deep unit built with solid wood frames, mortise and tenon joints, and 3 ply end panels. Those construction details support stable mounting, consistent alignment, and everyday kitchen use when incorporated into a Glenwood cabinet run.
Sold In: 1 Each