Glenwood wall cabinet describes a 24 inch wide, 36 inch high, 12 inch deep wall cabinet built for upper kitchen runs where a consistent size and height keep layouts straightforward. The Kitchen Kompact Glenwood Wall Cabinet, recessed panel GW24WT, uses a solid 3/4 inch wood frame construction so the face structure supports doors and daily use without racking during opening and closing. All frames are built of solid 3/4 inch oak, maple or beech, giving installers a hardwood face that holds fasteners and hinges in a predictable way along the stiles and rails. Each rail is kiln-dried, then joined by mortise and tenon and glued, which creates tight joints that stay aligned when the cabinet is fastened through the sides into neighboring units. This Glenwood 24WT sizing and build suit wall cabinet rows where uniform depth keeps alignment over base cabinets and keeps trim work simple.
The Kitchen Kompact Glenwood wall cabinet uses solid wood hanging strips on wall cabinets at both the top and bottom, creating two continuous structural bands for mounting to studs so loads transfer through solid lumber instead of edge material. Solid wood corner blocks that are glued and power nailed tie the face frame and cabinet box together, so when fasteners pull the cabinet tight to the wall, the stress is spread into these reinforced corners rather than concentrating on a thin panel edge. The 3 ply end panels built with a 1/2 inch thick engineered wood core and hardwood veneers keep the cabinet sides flat while accepting side-to-side screw joints to the next cabinet, which helps keep face frames flush across the run. Together, these construction details support straightforward hanging, leveling, and ganging of multiple GLENWOOD 24WT units.
The Kitchen Kompact 24 inch wide, 36 inch high, 12 inch deep Glenwood Wall Cabinet GW24WT fits typical upper kitchen elevations where 12 inch depth keeps the wall line tight above counters. Solid wood hanging strips at the top and bottom of the wall cabinet give installers defined fastening zones to align with wall framing, so rows of cabinets can be set level and secure. The recessed panel Glenwood front is built on a solid 3/4 inch oak, maple or beech frame, which means the visible face is hardwood around the opening while the 3 ply end panels handle side visibility with hardwood veneers. Solid wood corner blocks that are glued and power nailed reinforce the connection between face frame and box, so the cabinet works well in runs where units are pulled together tightly and then loaded with typical kitchen contents. This overall construction keeps the Glenwood wall cabinet suited to standard residential kitchen layouts needing consistent dimensions.
Each Glenwood cabinet rail is kiln-dried, joined by mortise and tenon, then glued, giving the frame precise joints that stay tight as the cabinet is fastened to walls and adjoining units. This mortise and tenon cabinet frame design helps face frames line up across several GW24WT cabinets without shifts at the rail connections over time. Solid wood hanging strips placed at both top and bottom of the wall cabinet provide predictable lumber backing wherever installers place mounting fasteners along those bands, reducing the need to rely on thin panel edges. The 3 ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers resist warping while still presenting a hardwood veneer surface on exposed ends, supporting clean reveals next to appliances or open spaces. Solid wood toe kicks at 3/4 inch thickness coordinate with the broader Kitchen Kompact cabinet construction approach, supporting consistent transitions where wall cabinets align visually above base units built with matching structural details.
The Kitchen Kompact GW24WT Glenwood wall cabinet measures 24 inches wide, 36 inches high, and 12 inches deep, fitting standard upper cabinet runs in many kitchen layouts.
The Glenwood wall cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a hardwood structure around the opening for mounting doors and hardware.
The Kitchen Kompact wall cabinet rails are kiln-dried, then joined by mortise and tenon and glued, creating strong joints that help keep the face frame square during installation.
The Glenwood cabinet end panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, balancing dimensional stability with a hardwood outer surface.
This wall cabinet uses solid wood hanging strips located at the top and bottom on wall cabinets, giving continuous structural backing for mounting fasteners into wall framing.
The Glenwood wall cabinet uses solid wood corner blocks that are glued and power nailed, tying the frame and box together to handle load at the corners.
The Kitchen Kompact Glenwood 24 inch wide, 36 inch high, 12 inch deep wall cabinet with recessed panel front and solid 3/4 inch hardwood frame supports straightforward layout in standard kitchens. Solid wood hanging strips, corner blocks, and 3 ply end panels work together to provide a stable box for wall mounting, ganging, and loading in typical upper cabinet runs. For projects using the GLENWOOD 24WT size and construction, this GW24WT Glenwood wall cabinet keeps dimensions, structure, and visible hardwood surfaces aligned across the installation.
Sold In: 1 Each