Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood sink base is a 36 inch wide cabinet designed as a sink base and range/base for ADA-focused layouts, so it supports accessible kitchen runs where consistent base dimensions matter. The cabinet measures 36 inches wide, 32-1/2 inches high, and 24 inches deep, giving installers a predictable footprint to coordinate with adjacent bases and countertop fabrication. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a solid frame-to-rail joint that holds square alignment during transport and everyday use. Oak flat panel doors pair with a recessed panel style, so the face design coordinates with other Kitchen Kompact Glenwood units in the same line. Solid wood hanging strips are located on the top and bottom of the cabinet, providing defined structural grab points when fastening the cabinet to wall framing and aligning a straight run.
This Kitchen Kompact 36 inch sink base uses solid wood hanging strips at the top and bottom, giving a clear structure for anchoring the cabinet to studs while leveling a run. The cabinet depth of 24 inches matches standard base cabinet lines, so countertop templating and appliance spacing follow typical dimensions. Solid wood corner blocks are glued and power nailed, so the box resists racking when you drive fasteners or adjust shims at the toe area. The 32-1/2 inch overall height supports ADA-oriented installations where lower working height and knee-space planning are important. Plywood drawers use a front-to-back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, which keeps drawer travel consistent once the cabinet is fixed in place.
This Glenwood ADA sink base cabinet, identified as GWH36RBS, belongs to the Kitchen Kompact Glenwood line, so it is intended for kitchen layouts using matching Glenwood styling. The 36 inch width suits common sink configurations, giving enough span for standard sink cutouts and plumbing access within a single cabinet. The 32-1/2 inch height ties to ADA-compliant layouts, supporting installations that require a reduced finished counter height when paired with appropriate tops. Solid wood toe kicks at 3/4 inch thick provide a sturdy front base for contact with flooring, so the cabinet stays stable when users stand close while working at the sink. Oak flat panel doors deliver a recognizable flat panel appearance, helping designers maintain a continuous look across bases and wall cabinets in the Glenwood series. The recessed panel door construction gives visual depth while staying compatible with straight, functional cabinet runs.
The solid 3/4 inch maple door frames use mortised and tenoned joints, so each corner of the frame is mechanically interlocked, which helps the doors hang true on concealed, self-closing hinges with less tendency to twist under load. Concealed, self-closing hinges keep the hardware hidden from the front and pull doors shut to a consistent position, which saves adjustment time when lining up reveals across multiple cabinets. The flat panel plywood insert uses a three-ply build with a rotary cut hard maple veneer face, giving a balanced panel that sits stably within the frame, reducing panel movement that might otherwise affect finish touchups. Solid wood corner blocks that are glued and power nailed connect the face frame and cabinet sides, supporting the box against racking as you clamp units together in a run. A four step process of stain, sealer, sanding, and catalyzed top coat is applied, building a layered finish that protects the maple and oak faces during daily kitchen use and routine cleaning. Plywood drawers with a front-to-back epoxy-coated drawer system, securely attached to a solid wood strip in the back, provide guided drawer movement that remains consistent after repeated opening, which benefits users who rely on smooth access under the sink or range base area.
The GWH36RBS cabinet is 36 inches wide, 32-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet depth while providing ADA-oriented height and a 36 inch sink base width.
The mortised and tenoned solid 3/4 inch maple door frames create strong joints that resist loosening, helping doors stay square and aligned on their hinges through regular opening and closing.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, providing a stable recessed center panel and a consistent maple surface that works well with the applied finish.
The solid wood hanging strips at the top and bottom give defined structural zones for fastening the cabinet to wall framing, supporting a straight, secure alignment in a cabinet run.
The concealed, self-closing hinges keep hardware hidden from view and pull doors to a repeatable closed position, which helps maintain even reveals across adjoining cabinets.
The plywood drawers use a front-to-back epoxy-coated drawer system securely attached to a solid wood strip in the back, giving guided drawer movement that remains stable during everyday use.
The Kitchen Kompact Kitchen Kompact Glenwood sink base offers a 36 inch wide, 32-1/2 inch high, 24 inch deep cabinet built with mortised and tenoned solid maple frames, oak flat panel doors, and solid wood structural elements that support straightforward installation. With adjustable shelves, concealed self-closing hinges, plywood drawers, and a four step stained and catalyzed finish, it fits projects where consistent construction and coordinated Glenwood styling are important. For projects needing an ADA-oriented sink cabinet with defined mounting structure and matching Glenwood appearance, this GWH36RBS model provides a focused solution for professional installers and serious DIY users.
Sold In: 1 Each