Kitchen Kompact Glenwood sink base ADA uses a 33 inch wide by 32-1/2 inch high by 24 inch deep cabinet format to give installers a defined footprint for planning Glenwood handicap range, base, or sink runs. The door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a rigid face frame that stays square during handling and setting. Oak, flat panel doors tie into that frame, so hinge loading is carried by real wood in day-to-day use. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, which provides a stable, flat center panel that finishes cleanly on site. Solid wood corner blocks are glued and power nailed, tying the case together at high stress points so the box resists racking as it is moved into position and anchored.
This Kitchen Kompact 33 inch wide sink base uses solid wood hanging strips located on the top and bottom, so you have defined fastening zones when tying into wall studs or adjacent cabinets in an ADA-conscious layout. Solid wood toe kicks at 3/4 inch thick create a sturdy front base edge that holds a straight line when leveling across adjoining units. Adjustable shelves give flexibility to route plumbing and still keep usable storage, while concealed, self-closing hinges keep the doors tight to the face frame for a clean reveal. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied over the rotary cut hard maple veneer face and oak, flat panel doors, so field cuts and exposed edges can align visually with the factory finish.
The Kitchen Kompact 33 inch W x 32-1/2 inch H x 24 inch D Glenwood sink base ADA compliant, recessed panel - GWH33RBS, gives you a defined module for Glenwood handicap 33 range, base, or sink layouts. Its recessed panel design with oak, flat panel doors works with other Kitchen Kompact Glenwood cabinets in the same product class, keeping door style and panel profile consistent along the run. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so hinge forces from daily sink use are carried by a strong frame rather than by composite materials. Solid wood hanging strips located on the top and bottom simplify tying this sink base into adjoining cabinets and backing, maintaining alignment through the length of the wall.
Solid wood corner blocks are glued and power nailed at critical joints, which keeps the case box rigid while you slide it into an opening, set shims, and clamp it to neighbors. Plywood drawers standard with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet keep drawer movement straight, so drawer alignment stays accurate under countertop loads. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving a stable center panel that resists telegraphing and helps doors stay flat at the reveal. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied across exposed maple and oak, so color and sheen look consistent from this GWH33RBS unit through the rest of the Kitchen Kompact Glenwood line.
The Kitchen Kompact Glenwood sink base is 33 inches wide, 32-1/2 inches high, and 24 inches deep, giving installers a standard footprint for counters and ADA-focused layouts.
The door frames are mortised and tenoned construction of solid 3/4 inch maple with oak, flat panel doors, providing a strong, stable door assembly around the sink opening.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, offering a smooth, stable surface that finishes consistently across the door.
Solid wood hanging strips located on the top and bottom provide continuous solid backing for fastening, which helps keep the sink base tight and aligned in the run.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, creating a uniform finish suited to routine kitchen environments.
Plywood drawers standard use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet for stable, smooth operation.
The Kitchen Kompact Glenwood 33 inch W x 32-1/2 inch H x 24 inch D GWH33RBS sink base combines mortised and tenoned solid 3/4 inch maple door frames, oak, flat panel doors, and solid wood corner blocks to anchor a sink in ADA-conscious layouts. Solid wood hanging strips, 3/4 inch thick solid wood toe kicks, adjustable shelves, and plywood drawers with a front to back epoxy-coated drawer system give installers predictable structure and interior function. Use this recessed panel Glenwood sink base when you need a defined module that matches other Kitchen Kompact Glenwood cabinets in both construction details and finish system.
Sold In: 1 Each