Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood sink base ADA cabinet is a 30 inch wide, 32-1/2 inch high, 24 inch deep base cabinet that provides a defined footprint for sink runs needing ADA-compliant heights. The Glenwood design uses recessed panel styling, so it matches Glenwood flat panel door runs visually while keeping a consistent profile across the row. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which keeps the joints mechanically locked for long-term door alignment on frequently used sink bases. Flat panel plywood inserts are three-ply with a rotary cut hard maple veneer face, so the panels stay stable while presenting a uniform maple grain that finishes consistently with the frame. Solid wood corner blocks are glued and power nailed, tying the cabinet sides and fronts together at stress points so the box resists racking under countertop and sink loads. Solid wood hanging strips at the top and bottom provide solid support when fastening the cabinet to wall or adjacent units.
Solid wood hanging strips at the top and bottom of the cabinet provide defined fastening zones, so installers can anchor the cabinet through solid material while setting the box plumb and level in a run. Adjustable shelves let the installer place shelf pins after plumbing is set, which helps avoid interference with supply lines and traps while still keeping storage functional. Concealed, self-closing hinges are used, so the doors close to a clean face frame line without exposed hinge hardware, and the self-closing action pulls doors tight, reducing the need for constant user adjustment. Solid wood toe kicks at 3/4 inch thick give a sturdy front base edge that carries finish down to the floor line, helping the cabinet handle day-to-day contact at the toe space. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, so the drawer slides track in line front to back, supporting smooth drawer movement at the sink base.
This Kitchen Kompact 30 inch wide Glenwood sink base sets the footprint for a standard sink position in a Glenwood run while holding an ADA-compliant 32-1/2 inch case height, which supports layouts that target accessible work surfaces. The recessed panel Glenwood front with flat panel plywood inserts and rotary cut hard maple veneer face coordinates with other Glenwood flat panel doors, so this base lines up visually with adjoining cabinets. Oak flat panel doors tie into Glenwood styling, giving the run a unified door look when this base is paired with matching wall and base units. Solid wood corner blocks and toe kicks let this cabinet sit solidly under countertops, so it integrates as a structural piece in the base line. The plywood drawers used in the system, supported by the epoxy-coated front to back drawer setup, give the sink base drawer space that functions consistently with other Kitchen Kompact bases in the same project.
Mortised and tenoned solid 3/4 inch maple door frames keep the hinge edge stable, helping doors hang true from job to job with minimal adjustment once aligned. The three-ply flat panel plywood inserts with hard maple veneer face reduce panel movement, so reveal lines around the recessed center panel stay even over time. Solid wood hanging strips positioned at the top and bottom define strong screw paths into framing or adjoining cabinets, which supports clean alignment when pulling multiple bases into a straight line. The four step finish process - stain, sealer, sanding, and catalyzed top coat - creates a consistent surface that accepts jobsite handling while keeping color and sheen uniform between this sink base and other Glenwood units. The epoxy-coated drawer system, secured to a solid wood strip at the back of the cabinet, maintains drawer slide alignment under load, helping drawers track smoothly and reducing callbacks related to drawer performance. Concealed, self-closing hinges keep the door hardware hidden while providing consistent closing action, which supports a tidy finished look along the entire Glenwood run.
The Kitchen Kompact Glenwood sink base measures 30 inches wide, 32-1/2 inches high, and 24 inches deep, so it fits standard base footprints while keeping the ADA-compliant case height.
The door frames use mortised and tenoned solid 3/4 inch maple, which locks the corners mechanically and helps the doors stay square under repeated kitchen use.
The recessed door center uses a flat panel plywood insert made from three-ply material with a rotary cut hard maple veneer face, giving stable panels with a consistent maple appearance.
The concealed, self closing hinges on this cabinet keep hardware hidden while pulling doors fully shut, supporting clean lines and reducing partially open doors at the sink.
The cabinet uses a four step process of stain, sealer, sanding, and a catalyzed top coat, creating a uniform finished surface suited to regular kitchen contact.
The plywood drawers use a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back, supporting aligned, smooth drawer travel.
The Kitchen Kompact Glenwood sink base ADA cabinet combines a 30 inch footprint with a 32-1/2 inch case height and 24 inch depth, giving a defined base for accessible sink locations. Solid 3/4 inch maple door frames, three-ply flat panel inserts with hard maple veneer, and solid wood corner blocks provide a sturdy, unified front and box structure for kitchen runs. Concealed, self-closing hinges, adjustable shelves, and the epoxy-coated front to back drawer system tie function and appearance together, so this cabinet works smoothly within a Glenwood layout. For projects built around Glenwood styling and ADA-conscious sink placements, this GWH30RBS base sets a dependable foundation for the rest of the line.
Sold In: 1 Each