Washer drain pan gives a dedicated catch basin under a washing machine so spilled or leaking water is directed away from the floor, which helps protect surrounding surfaces in a shop or laundry area. This 30 inch wide by 32 inch long pan defines a clear footprint under the appliance, which simplifies layout when placing or repositioning equipment. The 1 inch height creates a low-profile wall around the base, which provides a defined edge to collect water while still allowing straightforward movement of the washer onto the tray. The galvanized steel construction provides a solid metal surface under the machine, which supports the appliance as part of a stable installation zone. Killarney Metals branding identifies a purpose-built drip pan from a dedicated manufacturer, which gives installers a consistent part identity when matching multiple locations. The KM-03387 part number ties this exact pan to project documents, which reduces confusion during ordering and field installation.
The 30 inch by 32 inch footprint sets the maximum base area available under the washer, which guides installers when selecting appliances that can sit fully within the pan boundaries. The 1 inch height defines how far the tray will project above the finished floor, which matters when aligning the washer with adjacent platforms, cabinets, or work surfaces. The flat washer floor tray design supports placing the pan directly on the floor, which creates a consistent elevation reference when routing supply lines and standpipes. The galvanized steel washer pan construction provides a uniform metal plane, which helps keep the washer level so adjustments are focused on the appliance feet instead of substrate irregularities.
This washer drain pan is part of the drip pans category, which positions it for use anywhere controlled liquid capture under a washing machine is required. The 30 inch width supports installations where the washer base sits within a moderate footprint, which is common in many laundry and shop layouts. The 32 inch length offers added coverage front to back, which is useful when the rear wall or supply connections are close behind the machine. The 1 inch high edge is suited to areas where a low curb is preferred, which helps limit trip exposure in tight service spaces. Being a floor washer tray with drain, this pan aligns with projects that route water toward a drain point at floor level, which integrates into many utility room and shop floor designs. The galvanized steel material supports use in general shop and safety supply contexts, which fits within the broader offerings of Wurth Baer Supply for woodworking and related facilities.
The defined 30 inch by 32 inch plan size helps repeat the same layout across multiple units, which supports standardization in multi-machine rooms. The 1 inch height keeps the washer close to floor level, which reduces the need to adjust hose lengths or electrical reach when swapping machines on and off the tray. Galvanized steel as the base material gives a stable metal platform, which helps maintain appliance alignment so vibration tuning relies more on the washer feet than on surface resilience. The KM-03387 manufacturer part number allows specifiers and installers to call out a single, repeatable washer drain pan, which streamlines reorders and replacements in ongoing facility work. Positioning this pan as a floor washer tray with drain highlights its role in directing water to a lower outlet, which can support straightforward planning of drain locations relative to machine placement and surrounding shop setup.
The KM-03387 washer drain pan measures 30 inches wide by 32 inches long by 1 inch high, which defines the available footprint and curb height under the washing machine.
This Killarney Metals washer pan is made from galvanized steel, which provides a rigid metal base under the appliance in typical shop and laundry environments.
The 1 inch height raises the washer slightly above the floor, which creates a shallow containment edge while keeping step-up and connection adjustments minimal.
This product is described as a washer floor tray with drain, which aligns it with floor-mounted washer installations that direct water to a floor-level drain point.
The 30 by 32 inch size sets a predictable footprint, which helps installers plan washer placement and surrounding clearances using a known base dimension.
The KM-03387 part number identifies this specific Killarney Metals washer drain pan, which supports precise ordering and consistent use across multiple locations.
This washer drain pan from Killarney Metals provides a 30 inch by 32 inch galvanized steel floor tray with 1 inch height, which gives a defined, low-profile containment zone under a washing machine. For projects that call for a washer floor tray with drain and a clearly specified part number, choosing KM-03387 through Wurth Baer Supply aligns the pan dimensions, material, and identity with the planned installation.