Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
concealed flat bracket extended from the Pro Value Series is a steel construction support designed for floating shelves, standard shelves, countertops, work surfaces, ADA accessible applications, benches, and training rooms, so one bracket style can serve multiple project types on the job. The 1 inch width pairs with a 9 inch depth and 20 inch height, giving a slim profile while reaching far enough under surfaces to provide meaningful bearing support in deeper applications. The upper extension above the support arm provides superior strength by carrying load farther up the stud, which helps distribute stress and support heavier or more frequently used surfaces. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. A textured powder coat finish in black adds a finished appearance where portions of the bracket remain visible, while also protecting the steel in typical indoor woodworking environments.
This concealed flat bracket extended design uses vertical and horizontal adjustability holes, so the installer can shift the bracket slightly to align with existing studs or fine-tune elevation under a countertop or shelf. The square mounting holes lock the bolt in place during tightening, which allows single tool tightening and helps keep the bracket from spinning while the fastener is driven. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. The 1 inch wide, 9 inch deep, 20 inch high layout provides a long support arm and tall extension, which together support surfaces used for countertops, work areas, or benches.
This steel construction concealed flat bracket extended from the Pro Value Series is intended for applications such as countertops, work surfaces, floating shelves, standard shelves, ADA accessible locations, benches, and training rooms, so one bracket specification can cover different spaces within the same project. The 9 inch depth allows the support arm to project under deeper shelving or work tops, which matters when supporting items beyond shallow decorative ledges. With a 20 inch height, the upper extension reaches well above the support arm on the stud, giving more area for fasteners in structural framing. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
Square mounting holes are designed to lock the mounting bolt in place during tightening, so the installer can use a single tool, reducing the need to hold the bolt head with a second wrench and helping maintain bracket position on the stud. Vertical and horizontal adjustability holes allow small corrections during fitting, which is useful when studs are not perfectly spaced or when finished surfaces need fine alignment to adjacent cabinetry or walls. The upper extension above the support arm increases bracket strength by extending the load path higher on the stud, which is important for benches, work surfaces, and training room tops that see frequent load changes. The textured powder coat finish in black provides a surface that handles typical contact and helps the concealed bracket blend with dark-toned shelving or metalwork in closets, garages, and work areas.
The concealed flat bracket extended is 1 inch wide, 9 inches deep, and 20 inches high, so it offers a slim profile with a long support arm and tall extension for structural fastening on the stud.
The upper extension runs above the support arm and provides superior strength by extending the load path higher on the stud, which improves support for countertops, benches, and other frequently loaded surfaces.
This Pro Value Series concealed flat bracket is used for countertops, work surfaces, floating shelves, standard shelves, ADA accessible applications, benches, and training rooms, allowing one bracket type across many areas.
The square mounting holes lock the bolt in place so a single tool can tighten the connection, which simplifies fastening and helps keep the bracket from rotating during installation on the stud.
This concealed flat bracket has vertical and horizontal adjustability holes, allowing fine-tuning of height and side-to-side position to align shelves or tops with framing and adjacent elements.
The bracket has a textured powder coat finish in black, which gives a finished look where exposed and helps protect the steel in typical indoor shelving and work surface environments.
The concealed flat bracket extended from the Pro Value Series combines steel construction, a 1 inch by 9 inch by 20 inch profile, and an upper extension for superior strength, giving installers a single bracket that supports countertops, work surfaces, shelves, ADA accessible areas, benches, and training rooms with concealed support and consistent right-side-of-stud mounting.
Sold In: 2 Each
