Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
concealed flat bracket extended describes a steel bracket from the Pro Value Series that supports floating shelves, standard shelves, countertops, work surfaces, ADA accessible installs, benches, and training room surfaces, so one bracket pattern covers many interior support needs. The 2 inch width, 15 inch depth, and 26 inch height establish a tall, extended support arm, which carries load from the work surface back into the stud, giving the assembly solid vertical backing. Steel construction provides a rigid structure, which helps limit flex under typical shelf or counter use in shops, offices, or residential projects. The black textured powder coat finish protects the steel surface while presenting a low-visibility appearance under tops or shelves, which keeps the focus on the finished surface rather than the hardware. This combination of dimensions, construction, and finish creates a practical concealed support option for many wall-mounted surfaces.
The 2 inch wide by 15 inch deep by 26 inch high format defines how this bracket sits against the stud and under the supported surface, which helps plan clearances around plumbing, wiring, and cabinet framing. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. Vertical and horizontal adjustability holes provide multiple bolt positions, which allow slight shifts to match stud locations while still landing the support arm under the intended shelf or counter edge. Square mounting holes that lock the bolt help the bolt resist spinning while tightening, which lets the installer focus on bracket alignment instead of holding bolt heads.
This steel concealed flat bracket is specified for applications such as countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, and training rooms, so it suits both residential and commercial interior projects that rely on stud-backed support. The 15 inch depth positions the support arm under typical counter and deep shelf dimensions, which helps transfer loads back to the stud rather than the outer edge of the material. With a 26 inch height, the bracket engages a taller section of the stud, which spreads stresses over more fastener positions and supports surfaces that experience seated loads, such as benches and ADA accessible tops. The concealed orientation keeps the support under or behind the finished surface, which allows a clean appearance on floating shelves and wall-mounted workstations. The black textured powder coat finish matches many cabinet and fixture environments, which helps the bracket blend into shadows below tops or behind storage.
The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. Vertical and horizontal adjustability holes provide multiple fastener choices, which accommodate slight framing variations while still landing all bracket arms at the same finished height. Square mounting holes that lock the bolt in place make single tool tightening possible, which is especially helpful when brackets are installed overhead or in tight alcoves where holding both sides of a bolt is awkward. The upper extension above the support arm increases the effective lever arm into the stud, which supports heavier or more dynamic loads that can occur on benches or busy work surfaces. Together, the steel construction, extended height, and adjustability simplify achieving repeatable, level installations across a project.
The concealed flat bracket is 2 inches wide, 15 inches deep, and 26 inches high, so installers can plan stud contact height and support arm depth for shelves, countertops, and work surfaces.
The upper extension above the support arm increases the stud contact area and lever arm, which supports heavier or deeper surfaces such as countertops, benches, and training room tops.
The square mounting holes lock the bolt in place, so installers can tighten using a single tool, which simplifies work when aligning multiple brackets or working in tight spaces.
Vertical and horizontal adjustability holes provide multiple fastening positions, which help align bracket arms with studs while still matching the planned shelf or countertop layout.
The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
This Pro Value Series steel bracket is used for countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, and training room applications.
This Pro Value Series steel concealed flat bracket pairs a 2 inch by 15 inch by 26 inch format with an upper extension, vertical and horizontal adjustability holes, and square bolt-locking holes, which together support efficient, repeatable installs across countertops, shelves, benches, and ADA accessible surfaces.
Sold In: 2 Each
