Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
concealed flat bracket extended describes this Pro Value Series steel support designed for concealed mounting of horizontal surfaces. The 2 inch wide, 21 inch deep, 26 inch high format creates a long support arm and tall extension, which helps spread load into the stud when used for countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, or training room tops. The upper extension above the support arm adds structural leverage, so the bracket can transfer forces higher up the wall, which supports stability on taller or deeper installations. Steel construction provides a rigid support member, so deflection stays low under normal use. The concealed bracket style lets the hardware sit behind the surface, so installers can create clean-looking shelves and work surfaces while still relying on stud-mounted support.
This Pro Value Series concealed flat bracket uses vertical and horizontal adjustability holes, giving flexibility to position the 2 inch wide support arm relative to the stud and finished surface. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. Square mounting holes lock the bolt in place, so installers can tighten the 3/8"-16 x 4" mounting bolts using a single tool from one side. The 26 inch high extension section provides tall engagement on the stud, which helps distribute loads and moments over a greater area of wall framing for stable support.
This steel concealed flat bracket, sized 2 inches wide by 21 inches deep by 26 inches high, is intended for supporting countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, and training room surfaces. The 21 inch depth gives substantial reach under deeper tops or shelves, which supports applications such as kitchen overhangs or work counters where front edge support is critical. The tall 26 inch extension above the support arm lets the bracket tie into more of the stud length, which is useful where loads may vary along the span, such as benches or training tables. The floating shelves and standard shelves applications benefit from the concealed mounting, because the bracket sits behind the finished material while still carrying the shelf load into the stud.
The vertical and horizontal adjustability holes on this Pro Value Series concealed bracket let installers shift the 21 inch deep arm slightly up, down, left, or right on the stud, which helps achieve level surfaces when studs are not perfectly placed. Square mounting holes that lock the bolt in place allow tightening of the 3/8"-16 x 4" mounting bolts with a single tool, which speeds installation when multiple brackets are used along a wall. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. The textured black powder coat finish keeps the steel surface visually subdued behind shelves or tops, which supports a clean finished look while the concealed bracket provides the needed structural function.
The concealed flat bracket measures 2 inches wide, 21 inches deep, and 26 inches high, so it offers a long support arm and tall extension for engaging more of the wall stud.
The upper extension above the support arm increases the contact height on the stud, which improves strength and stiffness when supporting deeper shelves, countertops, or benches.
The vertical and horizontal adjustability holes allow shifting the bracket position on the stud, which helps align multiple brackets and level shelves or tops across a run.
The square mounting holes lock the bolt in place, which lets the installer tighten the 3/8"-16 x 4" mounting bolts using a single tool from one accessible side.
The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
The bracket has a textured black powder coat finish, which provides a durable surface that visually recedes behind shelves, countertops, or benches.
The Pro Value Series concealed flat bracket extended, measuring 2 inches wide by 21 inches deep by 26 inches high, combines a long arm and tall extension for stud-mounted support of countertops, work surfaces, floating and standard shelves, ADA accessible tops, benches, and training room installations. Steel construction, a textured black powder coat finish, vertical and horizontal adjustability holes, square mounting holes that lock the bolt, and right-side-of-stud mounting work together to support clean-looking surfaces with concealed structural support. Select this configuration when a concealed flat bracket with extended reach and stud engagement matches the depth and height requirements of your shelving or work surface layout.
Sold In: 2 Each
