Omega National 30 inch Verona range hood

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR7301S30SMB1MUF1 to RSR7301S30SMB1MUF1.

Omega National 30 Inch Verona Range Hood Use

Omega National 30 inch Verona range hood is a straight style wood range hood that creates a focal point over the cooktop, giving the kitchen a finished, built-in look that ties in with surrounding cabinetry. The maple construction and minimal trim detail form a clean-lined profile, so the hood blends into both traditional and contemporary layouts without visual clutter. A contrasting bottom trim adds a defined edge at the lower face of the hood, which visually anchors it on the wall and helps transition cleanly to the cooking surface area. The hood is designed to work with a Broan ventilator and liner setup, so the decorative wood shell provides the furniture-grade look while mechanical ventilation handles smoke and steam. This separation of form and function lets installers deliver a custom appearance while using a known ventilation platform.

Key Verona Hood Details For Project Planning

• The sleek, minimal trim detail creates a simple face profile, which helps the hood align with flat-panel or shaker doors for a consistent cabinet run and easier visual layout across the wall.
• The contrasting bottom trim introduces a defined border at the lower edge, which frames the cooking zone and helps transitions between tile, backsplash, and adjacent wall cabinets look deliberate and finished.
• The maple wall hood is sized at 30 inches wide, which suits many standard 30 inch cooking applications and lets the hood integrate into common cabinet spacing without redesigning upper cabinet layouts.
• The silver metallic powder coated liner is designed to fit Broan ventilation, so trades can pair the wood shell with Broan ventilators and get a coordinated interior surface that stands up to the vent environment.
• The hood is part of Omega National Products wood range hoods, which gives shops and installers a known brand source when matching other Omega National components in a kitchen project.

Wall Mount Verona Hood Installation And Fit

The maple Verona wall mount range hood installs with a French cleat hanging system, which lets installers mount the wall cleat first, then lift the hood onto it for a solid, repeatable engagement. This approach supports fine-tuning position before final fastening, which is especially useful when aligning with adjacent wall cabinets and tile lines. The hood height can be trimmed, so the installer can cut the body to suit specific ceiling heights and target mounting heights over the cooktop within the wood structure. This trim-to-fit capability helps the hood land at a consistent reveal relative to upper cabinets, even in remodel conditions where ceiling heights vary. The Broan compatible liner sets the internal footprint for the ventilator, guiding where the ventilation components locate inside the wood shell for a straightforward mechanical layout.

Using This Verona Hood In Real Kitchens

Where The Maple Verona Wall Hood Fits Best

This Omega National maple Verona wall mount range hood fits kitchens that call for a wood range hood as part of the cabinet design, especially when a 30 inch wide focal point is planned above a cooking surface. The straight Verona profile and minimal trim detail work with a wide range of door styles, so designers can specify the same hood form in multiple lines without redesigning the elevation. Because the silver metallic powder coated liner is designed to fit Broan ventilation, the hood is suited to projects already standardized on Broan ventilators. That compatibility lets mechanical contractors and cabinet shops coordinate around a single ventilator brand, simplifying planning between trades. The contrasting bottom trim also suits layouts with strong horizontal lines, since it creates a crisp visual break at the bottom of the hood.

Details That Support Repeatable Hood Installs

The French cleat hanging system provides a stable way to mount the Verona wood range hood, because the wall cleat carries the load along its length rather than relying on a single point. This style of hanging helps keep the hood face plane aligned with neighboring cabinets, reducing the need for shimming after initial placement. The ability to trim the hood height provides further control, allowing installers to adjust the vertical dimension to align crown or top edges with surrounding cabinetry in varying site conditions. With the silver metallic powder coated liner designed for Broan ventilation, installers can plan cutouts, duct transitions, and wiring around a known interior liner footprint, which streamlines shop drawings and field layout. The overall combination of a defined width, trim-to-fit height, and cleat mounting creates a predictable workflow from shop to wall, supporting consistent results across multiple kitchen projects.

Common Questions About The Verona Wood Range Hood

Choose This Verona Hood For Coordinated Projects

The Omega National 30 inch Verona maple wall mount range hood offers a straight wood hood design that works with a Broan compatible liner, giving trades a coordinated path from cabinet layout to ventilation. The French cleat hanging system and trim-to-fit height let installers adapt the hood to real site dimensions while aligning with surrounding cabinets. The minimal trim detail and contrasting bottom trim provide the finished focal point many kitchen designs call for. For projects built around Broan ventilation and wood range hoods, this Verona model provides a clear, defined solution.