NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A30SMB17UF1 to RSR07A30SMB17UF1.
Omega National Rift White Oak Omni Wall Hood
Omega National 30 inch Rift White Oak Omni Wall Mount Range Hood is a wood range hood that creates a bold focal point with a modern, block-style design, giving kitchen wall runs a clean, geometric look that suits contemporary cabinetry layouts. The rift white oak construction supports projects that call for a distinctive grain pattern and a coordinated wood appearance across cabinets and trim. As part of Omega National Products wood range hoods line, this unit fits kitchen and bath cabinet accessory specs where a defined 30 inch width is required over a 30 inch cooking surface. The range hood is wall mounted, so it integrates into standard wall cabinet planning without island framing, and the block-style profile gives installers clear outside reference lines when aligning with adjoining cabinets and molding.
Key Range Hood Details For Project Planning
- The modern, block-style design creates a bold focal point, giving installers a clear visual centerpiece that helps organize cabinet runs and define the cooking zone in both new construction and remodel layouts.
- Rift white oak material provides a specific wood look, allowing projects to align hood appearance with rift-cut fronts and panels so the hood reads as part of the overall cabinet package.
- The 30 inch width targets the common 30 inch cooking area, so designers and installers can position the hood within standard base and wall cabinet modules without reworking surrounding cabinet sizes.
- The Omni wall mount configuration works within typical wall cabinet elevations, giving trades a fixed reference for rough-in dimensions and simplifying coordination with upper cabinet heights.
- Broan compatible design with a silver metallic powder coated liner supports pairing with a matching Broan ventilator, so the wood shell and metal liner work together as a single ventilation solution.
Wall Mount And French Cleat Installation Workflow
This Omni wall mount range hood installs using a French cleat hanging system, which provides a straightforward method for lifting the hood onto the wall and setting it onto a mating cleat for support. The French cleat approach gives installers a continuous bearing surface along the width of the hood, which helps distribute load to the wall framing during mounting. Because the hood is designed as a wall mount unit, layout focuses on securing the cleat at the correct height and level, then seating the hood body onto that cleat. Once hung, the fixed wall location allows trades to complete ventilation connections to the liner designed to fit Broan ventilation, keeping mechanical and cabinet work aligned around the same reference point.
Using This Wood Range Hood In Real Projects
Where This Omega National Range Hood Fits Best
This Omega National Omni wall mount range hood fits kitchens and bath areas that use wood range hoods as functional design elements within cabinet runs. The 30 inch width aligns with standard 30 inch appliance bays, so it fits above cooking equipment sized to that common footprint. Its rift white oak construction suits projects where rift white oak cabinets, panels, or trim are specified, allowing the hood to extend that material choice across the ventilation area. The modern, block-style design serves layouts that call for straight lines and simple massing, making it well suited to transitional and contemporary designs where an over-ornamented hood would conflict with flat-panel or simple-door cabinet styles.
Details That Support Repeatable Installation Results
The adjustable height design allows the hood to be trimmed, so installers can cut the wood body to reach a target height between the cooking surface and ceiling while still maintaining the block-style lines. This trim capability helps align bottom edges and crown transitions when ceiling heights vary from plan. The French cleat hanging system supports repeatable installs by letting crews set a level cleat first, then hang the hood onto that reference without holding the full weight during fine adjustments. The silver metallic powder coated liner is designed to fit Broan ventilation, which gives mechanical trades a defined metal interface for mounting a Broan ventilator inside the wood shell. That pairing helps coordinate cutout locations and duct connections because the liner geometry and Broan ventilator are planned to work together inside the hood cavity.
Practical Questions About This Omni Range Hood
What type of product is the R07A30SMB17UF1 unit?
The R07A30SMB17UF1 unit is an Omega National Omni wall mount wood range hood, so it functions as both a ventilation housing and a visual focal point over the cooking area.
How does the French cleat hanging system affect installation?
The French cleat hanging system lets installers fasten a wall cleat first, then lift and hang the hood onto it, which simplifies leveling and supports the hood weight during positioning.
What does adjustable height mean for this wood range hood?
Adjustable height means the hood can be trimmed, so installers can cut the wood to match specific ceiling heights and target clearances while keeping the block-style appearance.
How is this hood used with a Broan ventilator?
This hood uses a silver metallic powder coated liner designed to fit Broan ventilation, so a Broan ventilator installs into the liner as the active ventilation component.
What role does the silver metallic powder coated liner play?
The silver metallic powder coated liner provides the metal interior surface shaped to accept Broan ventilation, creating a defined cavity for the ventilator and duct connections.
Where does this 30 inch Omni wall mount hood typically get installed?
This 30 inch Omni wall mount hood typically installs on a wall above a 30 inch cooking area within a run of cabinets, aligning the hood body with surrounding wall units.
Selecting This Hood For Broan Ventilation Projects
Choose the Omega National Omni wall mount range hood R07A30SMB17UF1 when a 30 inch rift white oak wood hood is needed to pair with a Broan ventilator. The adjustable height that can be trimmed supports custom ceiling conditions while retaining the modern, block-style form. The French cleat hanging system supports efficient wall mounting, giving installers a straightforward path from rough wall layout to final hood placement. The silver metallic powder coated liner designed to fit Broan ventilation ties the wood shell to a known ventilator interface, helping coordinate cabinet and mechanical work around a single hood solution.
