Omega National wood range hood 30x42 alder

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A30SMB1QUF1 to RSR07A30SMB1QUF1.

Omega National Wood Range Hood For Wall Installs

Omega National wood range hood is a 30 inch wide Omni wall mount range hood in alder that creates a bold focal point with its modern, block-style design, so the hood visually anchors a contemporary kitchen layout. The Omni wall mount configuration positions the hood on the wall, directing attention to the cooking area for a defined work zone. The alder construction gives a consistent wood surface that can be finished to match surrounding cabinetry, supporting a unified look across the run. The hood is sized at 30 inches wide by 42 inches, aligning with common cooktop and cabinet layouts for straightforward planning. This model is designed to work with a Broan ventilation system using the compatible liner, so installers can pair a known ventilation brand with a wood hood shell that suits custom kitchen projects.

Key Omni Hood Details That Support The Job

• The modern, block-style design creates a bold focal point, so installers can use this hood as a visual centerpiece in contemporary or transitional kitchens without adding extra decorative elements.
• The adjustable height allows the hood to be trimmed, giving flexibility to fit varying ceiling heights or cabinet configurations and helping align the hood visually with adjacent wall cabinetry.
• The French cleat hanging system supports easier installation by letting installers set a sturdy cleat first, then hang and fine-tune the hood position during layout and leveling.
• The silver metallic powder-coated liner is designed to fit Broan ventilation, providing a defined interface between the wood hood shell and the Broan ventilator for a coordinated interior.
• The Broan ventilator is sold separately, so the ventilation unit can be selected to match the desired airflow performance and Broan model series while using the same wood hood exterior.

Wall Mount And Liner Details For Installation

This Omni wall mount range hood is designed to install against the wall, organizing the cooktop and hood into a single visual plane that simplifies alignment with adjacent cabinets. The adjustable height design allows the hood to be trimmed, which helps match specific ceiling conditions and finished installation heights in the field. The French cleat hanging system lets installers fasten the cleat, then lift the hood into place, supporting precise placement and easing final leveling. The silver metallic powder-coated liner is designed to fit Broan ventilation, so once the hood body is mounted, the liner provides a defined mounting space for the Broan ventilator inside the wood shell.

Using This Omni Hood In Real Kitchen Projects

Where The Omni Wall Mount Hood Fits Best

The Omni wall mount range hood in alder is suited to kitchens where a bold, modern block-style hood is part of the overall cabinet plan, giving designers and installers a defined focal point over the cooking surface. With a 30 inch width, the hood aligns well with common 30 inch cooking appliances and upper cabinet runs, helping integrate the unit into standard layouts. The adjustable height feature means the hood can be trimmed on site, which is useful when ceiling height or soffit conditions vary from project to project. The alder construction allows the exterior to be finished to coordinate with surrounding wood cabinetry, supporting consistent color and grain presentation across the wall.

Details That Support Repeatable Hood Installations

The French cleat hanging system on this Omega National wood range hood provides a structured installation method: installers mount the cleat first, then hang the hood, which streamlines alignment and reduces repositioning during layout. The silver metallic powder-coated liner is designed to fit Broan ventilation, giving a predefined space inside the hood where the Broan ventilator is positioned, which helps standardize the interface between the wood shell and the mechanical components. Because the Broan ventilator is sold separately, installers can match the liner with a chosen Broan ventilation unit while relying on the same hood body for multiple projects. The manufacturer part number R07A30SMB1QUF1 precisely identifies this Omni wall mount alder model with Broan compatible liner, helping teams reorder the same configuration across jobs.

Common Questions About This Omega National Hood

Selecting This Hood For Your Next Install

The Omega National wood range hood with Omni wall mount design, alder construction, and modern block-style profile provides a defined focal point that ties directly into common 30 inch cooking layouts. The adjustable height supports on-site trimming to match real ceiling and cabinet conditions, while the French cleat hanging system offers a structured mounting approach. With a silver metallic powder-coated liner designed to fit Broan ventilation and a Broan ventilator sold separately, this configuration suits projects that pair a wood hood shell with a Broan ventilation solution. Use the part number R07A30SMB1QUF1 to specify this exact alder Omni hood with Broan compatible liner for upcoming kitchen work.