Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 78-3/4" - 94-1/2", 4-Slides, - ALT-ST20-D360LL-22
Description
Sugatsune Inset Pocket Door Kit For Cabinets
Sugatsune inset pocket door kit provides an inset pocket door system built around four slides for cabinet and multimedia applications. This kit uses pocket door hardware designed so the door can open, then slide back into the cabinet, which helps keep doors clear of workspaces when access is needed. The system is specified with a minimum cabinet depth of 22-1/2 inches, so it targets deeper casework common in multimedia, closet, and workspace components. A usable door height range from 78-3/4 inches to 94-1/2 inches supports tall doors within that band, giving designers and installers a defined vertical envelope to work in. The product sits in the pocket door hardware class under multimedia and workspace components, so it aligns with projects where clean access to equipment or storage is required.
Key Pocket Door Hardware Details For Projects
- The minimum cabinet depth of 22-1/2 inches sets the required interior space so the door can fully retract, which helps installers size cabinets correctly for the sliding action.
- The door height range of 78-3/4 inches to 94-1/2 inches defines how tall the door panel can be, helping layout work and material cutting for consistent, repeatable casework.
- The kit uses four slides as its pocket door slides, which supports the door movement sequence and gives the installer defined slide points to align within the cabinet.
- A synchronized board is part of the system to coordinate slide motion, which supports smoother, unified door travel across the hardware components.
- The product class as pocket door hardware within multimedia and workspace components aligns it with cabinets that need doors to retract out of the way for equipment or storage access.
- The Sugatsune America brand and ALT-ST20-D360LL-22 manufacturer part number give a precise reference, which supports specifying and reordering the same pocket door system on future jobs.
Inset Pocket Door Installation And Motion Control
The inset pocket door system is specified as a Sugatsune inset pocket door kit, so it is intended for inset door layouts where the door sits flush within the cabinet front when closed. The use of four slides gives defined points for mounting within the cabinet, which supports accurate alignment of the door travel into the pocket. The minimum cabinet depth of 22-1/2 inches directly affects installation planning, since case interiors must match this depth to allow the door to retract fully. Door height parameters from 78-3/4 inches to 94-1/2 inches guide hinge and plate positioning, helping installers place hardware along the stile with predictable clearances. The presence of 5-speed adjustable soft-closing dampers means the closing speed can be adjusted through five settings, which helps tune the door motion to the cabinet size and door weight characteristics within the specified range.
Using This Inset Pocket Door System In Projects
Where This Inset Pocket Door Kit Fits Best
This inset pocket door system sits in the pocket door hardware category for multimedia and workspace components, so it fits applications where doors must retract to provide clear front access. The minimum 22-1/2 inch cabinet depth lines up with deeper cases often used around electronics, closets, or storage bays, which benefits layouts that need full door concealment. A door height band from 78-3/4 inches to 94-1/2 inches works with tall cabinet openings in that specific span, which can streamline design by standardizing door sizes on a project. Because the door is inset, the closed position is flush with the cabinet face frame or front, supporting projects that require a cleaner front line while still allowing the doors to pocket back when open.
Why These Motion And Hardware Details Matter
The inset pocket door system uses four slides in conjunction with a synchronized board, which coordinates movement between the slide members and helps the door track smoothly during extension and retraction. A 5-speed adjustable soft-closing damper is specified, so the soft-closing behavior can be tuned through five adjustment levels, which helps manage the final closing stroke for doors within the stated height range. Hinges and hinge mounting plates are identified as part of the system, tying the swinging motion to the sliding hardware for a controlled door sequence. The ALT-ST20-D360LL-22 manufacturer part number ties all of these elements to a single defined pocket door system, which supports consistent selection whenever this combination of inset layout, cabinet depth, and door height range is required across multiple cabinets or repeat jobs.
Common Questions About This Pocket Door Hardware
What cabinet depth does this pocket door kit require?
The Sugatsune inset pocket door kit specifies a minimum cabinet depth of 22-1/2 inches, which sets the interior case depth required so the door can fully retract into the cabinet.
What door height range does the inset pocket door system support?
The inset pocket door system is designed for door heights from 78-3/4 inches to 94-1/2 inches, which defines the usable vertical size for door panels in this hardware setup.
How many slides are used in this Sugatsune pocket door kit?
The Sugatsune inset pocket door kit uses four slides, which provide the guided tracks that carry the door into and out of the cabinet pocket during operation.
What does 5-speed adjustable soft-closing mean on this system?
The inset pocket door system uses 5-speed adjustable soft-closing dampers, meaning the soft-close action can be adjusted across five settings to control the door's closing motion.
How does the synchronized board contribute to door movement?
The synchronized board in the pocket door hardware coordinates motion between components, supporting smoother and more unified movement as the door travels on the four slides.
What is the role of the hinges and mounting plates in this kit?
The inset pocket door system specifies hinges and hinge mounting plates that work with the slides, providing the pivot points that control the swing before the door pockets back.
Selecting This Sugatsune Inset Pocket Door Kit
This pocket door hardware, sold as the Sugatsune inset pocket door kit under part number ALT-ST20-D360LL-22, is built for inset doors on cabinets with a minimum 22-1/2 inch depth and door heights between 78-3/4 inches and 94-1/2 inches. The four-slide layout, synchronized board, hinges, hinge mounting plates, and 5-speed adjustable soft-closing dampers come together as a defined system for retracting tall inset doors into deeper casework. For projects matching these cabinet depth and door height parameters, this inset pocket door system gives a clearly specified option that aligns with multimedia and workspace component layouts.