Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 28-9/16", Door Height 31-1/2" - 47-1/4", 2-Slides, - ALT-ST20-D360S-28
Description
Inset Pocket Door System For Cabinet Doors
Inset Pocket Door System from Sugatsune America is a pocket door hardware kit designed to let an inset cabinet door slide back into the cabinet, so the door clears the opening during use. The kit is specified with a minimum cabinet depth of 28-9/16 inches, which sets the cabinet size needed to house the door and slide mechanism. It is rated for door heights from 31-1/2 inches to 47-1/4 inches, giving flexibility to use the same system across a range of cabinet door sizes in that band. Two slides handle the door travel in and out of the cabinet, guiding the motion so the door tracks consistently. A synchronized board ties the motion of the components together, which supports smoother operation as the door transitions between swinging and sliding.
Key Pocket Door Details That Support Use
- The 5-speed adjustable soft-closing dampers let the installer tune the closing action, so the door can be set to close more gently or more firmly to match the cabinet build and door weight.
- The two slides in the kit carry the door on a defined path, which helps the door move in and out of the cabinet opening without binding when the cabinet is built to the stated depth.
- The synchronized board coordinates movement between the sliding and soft-closing components, which helps produce a predictable feel as the door is opened and stowed inside the cabinet.
- The specified door height range of 31-1/2 inches to 47-1/4 inches tells the installer which doors can be used, so the hardware geometry lines up properly along the full door height.
- The hinge and hinge mounting plate components provide the pivot connection at the cabinet face, which allows the door to swing out before it slides back into the cabinet pocket.
Pocket Door Installation And Fit Parameters
This Sugatsune America pocket door hardware kit is defined for inset cabinet doors, so the door face sits flush with the cabinet front when closed. The minimum cabinet depth of 28-9/16 inches dictates the carcass depth needed to accommodate both the stored door and the slide travel. The door height specification of 31-1/2 inches to 47-1/4 inches means the hardware geometry is laid out around those heights. The two slides, hinges, and hinge mounting plates work together so the door can first pivot on hinges and then ride back on the slides. The part number ALT-ST20-D360S-28 identifies this specific ST20 S-type configuration, which helps match it to drawings or existing layouts that call out that series.
How This Pocket Door Kit Works In Projects
Using The Kit In Cabinet And Multimedia Builds
This inset pocket door hardware is categorized as pocket door slides under pocket door hardware, so it is aimed at applications where a door must fully open without blocking access. The specified minimum cabinet depth of 28-9/16 inches points it toward deeper cabinet or enclosure projects where there is room to park the door inside. The door height range of 31-1/2 inches to 47-1/4 inches suits medium-height doors often seen in multimedia, workspace, or storage cabinetry in woodworking projects. Two slides carry the door into the cabinet, while the hinges and hinge mounting plates hold the door on the face frame line for normal closed operation. The 5-speed adjustable soft-closing dampers then control the final travel, which can help keep the movement controlled around electronics or organized storage where a steady close is useful.
Details That Support Repeatable Motion And Alignment
The Sugatsune Inset Pocket Door Kit combines two slides, a synchronized board, and a 5-speed adjustable soft-closing damper so the door transitions between swinging and sliding in a coordinated way. The synchronized board links the mechanism, which helps keep both sides of the slide action working together as the door is moved. The adjustable soft-closing dampers regulate the last portion of travel, so the door is guided into position at a controlled speed instead of relying only on operator feel. Hinges and hinge mounting plates establish the pivot and mounting geometry at the cabinet front, which is important for aligning the inset door flush with the face when closed. The defined door height range and minimum cabinet depth give concrete design parameters, which supports repeatable layouts when the same ALT-ST20-D360S-28 pocket door configuration is used across multiple cabinets in a run.
Answers To Common Inset Pocket Door Questions
What type of doors does this Sugatsune inset pocket door kit support?
The Sugatsune Inset Pocket Door Kit is specified for inset cabinet doors, so the door face sits flush with the cabinet front when it is in the closed position.
What cabinet depth is required for the ALT-ST20-D360S-28 pocket door?
The ALT-ST20-D360S-28 pocket door hardware is defined with a minimum cabinet depth of 28-9/16 inches, which sets the carcass depth needed to store the door and slides.
What door height range works with this pocket door hardware?
This pocket door system is specified for door heights from 31-1/2 inches to 47-1/4 inches, so doors within that range align with the slide and hinge geometry.
How do the 5-speed adjustable soft-closing dampers help in use?
The 5-speed adjustable soft-closing dampers let the installer set the closing speed, so the door can be tuned for smoother, more controlled movement at the end of travel.
What role does the synchronized board play in this system?
The synchronized board ties the slide and damper motion together, which helps the door move in a coordinated way when it transitions between swinging and sliding.
What components form the hinge connection on this pocket door kit?
This Sugatsune pocket door hardware uses hinges and hinge mounting plates to create the pivot point at the cabinet front for the inset door.
Selecting This Pocket Door Kit For Your Build
This Sugatsune Inset Pocket Door Kit from Wurth Baer Supply is defined as pocket door hardware for inset doors, with a minimum cabinet depth of 28-9/16 inches and a door height range of 31-1/2 inches to 47-1/4 inches. The combination of two slides, a synchronized board, hinges with hinge mounting plates, and 5-speed adjustable soft-closing dampers provides a coordinated pocket door motion suited to cabinet and multimedia projects that match these dimensions. When a project calls for an ALT-ST20-D360S-28 pocket door layout with controlled soft closing and defined geometry, this kit offers the specified components to build that configuration into the cabinet design.