Sugatsune IF Series 11/16" - 1-3/16" Door Thickness Inset Receding Door Mechanism Set with 1-Left Stay & 1-Right Stay, Recommended Door Height 11-13/16", - IF-H360W-14
Description
Sugatsune IF Series Inset Receding Door Mechanism
Sugatsune IF Series inset receding door mechanism is an up and under flipper slide set designed for upward-opening cabinet doors, so doors lift and recess instead of swinging into the work area. The mechanism is specified for inset receding flip doors, which allows the door to sit flush in the frame before it lifts, helping keep clean cabinet lines on built-ins or workspace runs. This IF-H360W-14 set is identified as a receding flipper door mech, so it is suited to projects that call for a compact, up-and-under motion rather than a standard swing door. The set is described as having 1-left stay and 1-right stay, giving you a matched pair to manage both sides of the door for balanced operation on suitable cabinet constructions.
Key Working Details For Cabinet Door Projects
- The mechanism is designed for 11/16 inch to 1-3/16 inch door thickness, so it supports a typical range of cabinet door constructions while letting you keep to common panel builds in the shop.
- The recommended door height is 11-13/16 inch, which gives a clear target size when planning openings so the flipper action aligns with the intended geometry of the IF-H360W-14 system.
- The product is described as an up and under flipper slide, so the door travels up and then back, helping free the front of the cabinet during use in multimedia, workspace, or overhead applications.
- The mechanism is listed as an inset receding flip door mech, so it is aimed at doors that sit within the cabinet frame before moving, supporting a clean front in shelf, closet, or garage organization runs.
- The set is specified with 1-left stay and 1-right stay, so both sides of the door motion are managed by matched components, which supports consistent tracking across the width of suitable doors.
Soft-Close Action And Motion Adjustment Details
The IF-H360W-14 receding door mechanism set incorporates a soft-close feature that prevents slamming, so the door decelerates at the end of travel instead of hitting the cabinet hard. This soft-close action can reduce impact on the cabinet structure during repeated cycles in multimedia and workspace areas. The product description notes adjustable soft-closing speed, so the closing behavior can be tuned within the range designed into the mechanism to better match door size and user preference. Because the mechanism is for upward-opening cabinet doors, combining the up and under movement with soft-close control helps maintain a more controlled motion at shoulder height where abrupt movement can be disruptive in daily use.
Using This Up And Under Flipper Slide In Projects
Where The IF-H360W-14 Mechanism Fits Best
This Sugatsune America up and under flipper slide belongs to the overhead flipper slides class, so it aligns well with cabinet layouts where doors need to move upward above the opening. The category listing notes use in shelf, closet, and garage organization, which positions the mechanism for storage areas where an open swing door might obstruct access or nearby equipment. The product is also grouped under multimedia and workspace components, so it suits overhead cabinets above desks, benches, or media equipment where a receding door keeps the front clear while gear is in use. Because the mechanism serves upward-opening cabinet doors with an inset receding flip motion, it supports designs that call for flush fronts when closed and a clear, unobstructed opening when the door is stored above.
Why The Sugatsune IF Series Details Matter
The IF-H360W-14 part number identifies this unit within the Sugatsune IF Series, so it can be specified consistently for repeat projects that require the same inset receding flip behavior. The soft-close feature that prevents slamming helps limit door shock loads, which is useful for cabinetry that sees frequent daily operation in workspaces or multimedia setups. Adjustable soft-closing speed allows the installer to work within the mechanism's design range to balance motion for doors within the 11/16 inch to 1-3/16 inch thickness span and the recommended 11-13/16 inch height, helping achieve a closing rate that feels appropriate for the door mass. The set's configuration of 1-left stay and 1-right stay gives a defined pairing of components, so both sides of the upward-opening door operate in concert under the same IF Series geometry, supporting consistent motion over the life of the installation.
Practical Questions About This IF Series Mechanism
What type of doors does the IF-H360W-14 mechanism operate?
The IF-H360W-14 mechanism operates upward-opening cabinet doors with an inset receding flip motion, so the door lifts and moves back, clearing the front of the cabinet during use.
What door thickness range is supported by this set?
The IF Series inset receding door mechanism is designed for doors between 11/16 inch and 1-3/16 inch thick, which covers many common cabinet door constructions in woodworking projects.
What is the recommended door height for this flipper slide?
The upward-opening flipper slide has a recommended door height of 11-13/16 inch, giving a target dimension that aligns with the intended motion path of the mechanism.
How does the soft-close feature affect cabinet use?
The Sugatsune IF Series soft-close feature prevents slamming, so the door slows near closing, reducing impact on the cabinet and creating a quieter motion in work or living spaces.
Can the soft-closing speed be adjusted on this mechanism?
The IF-H360W-14 mechanism has adjustable soft-closing speed, allowing tuning within its design range so the closing behavior better matches door size and user preference.
What components are identified in this stay set?
The IF Series receding door mechanism set is specified with 1-left stay and 1-right stay, providing defined parts for both sides of the upward-opening door motion.
Selecting This Upward-Opening Sugatsune IF Mechanism
This Sugatsune IF Series inset receding door mechanism set from Wurth Baer Supply is aimed at projects calling for upward-opening, up and under flipper doors with a flush front. The IF-H360W-14 soft-close feature that prevents slamming, together with adjustable soft-closing speed, supports controlled door motion in multimedia, workspace, and storage layouts. With design details covering 11/16 inch to 1-3/16 inch door thickness and a recommended 11-13/16 inch door height, this set gives clear working parameters when planning cabinet openings. For cabinetmakers and installers working within these dimensions and looking to pair inset receding flip action with soft-close behavior, this IF Series stay set offers a defined solution around a specific Sugatsune America part number.