Sugatsune IF Series 11/16" - 1-3/16" Door Thickness Inset Receding Door Mechanism Set with 1-Left Stay & 1-Right Stay, Recommended Door Height 13-3/4", - IF-H360W-16

Sugatsune IF Series Inset Receding Door Mechanism Set

Sugatsune IF Series inset receding door mechanism set is designed for upward-opening cabinet doors so a door can lift up out of the way and clear the workspace. The mechanism is built as an up and under flipper slide, which moves the door up and then back to reduce interference with access to the cabinet interior. The set uses one left stay and one right stay, creating balanced support across the door width for smoother travel during the full motion. This IF-H360W-16 model is tuned for a recommended door height of 13-3/4 inches, so the spring and geometry match that size range for predictable action. The hardware is engineered for door thickness from 11/16 inch to 1-3/16 inch, covering a practical spread of common cabinet door constructions. A soft-close feature prevents slamming at the end of travel, which helps protect the cabinet and provides a controlled closing feel on every cycle.

Key Working Advantages For Cabinet Installers

• The IF-H360W-16 up and under flipper slide moves the door upward and back, creating clear frontal access to cabinet contents, which supports cleaner layouts for overhead storage or multimedia units.
• The mechanism is specified for door thickness between 11/16 inch and 1-3/16 inch, allowing the same hardware type to serve a range of door builds and simplifying hardware standardization across similar projects.
• The recommended door height of 13-3/4 inches means the internal forces and travel are matched to that size, helping the door track more predictably in everyday operation once installed in that height range.
• One left stay and one right stay distribute support on both sides of the door, which helps the door stay aligned through the lift and receding arc and reduces the tendency for racking during use.
• The soft-close feature slows the final part of the closing stroke, reducing impact on the cabinet frame and face and helping the door settle into position with less shock to hinges and adjoining finishes.
• The adjustable soft-closing speed lets the installer fine-tune how quickly the door settles, which helps match user preference and cabinet size without changing the core mechanism.

Inset Receding Door Mounting And Adjustment Details

This Sugatsune America up and under flipper slide is intended for upward-opening cabinet doors, so the mechanism geometry is configured around lifting the door vertically before tucking it back. The specified door thickness range of 11/16 inch to 1-3/16 inch defines the construction envelope that the stays are designed to support, guiding material and build choices for the door panel. With a recommended door height of 13-3/4 inches, the counterbalancing of the stays aligns with that dimension to support smooth travel through the arc. Because the set provides a left stay and a right stay, the load and motion are shared across both sides for a more even lift during use. The soft-close feature and adjustable soft-closing speed are integrated into the mechanism, so closing behavior can be tuned at the hardware level without changing the cabinet layout.

Using The IF-H360W-16 In Real Projects

Where This Upward-Opening Mechanism Performs Best

This IF-H360W-16 inset receding door mechanism set is classified as an up and under flipper slide, which suits overhead flipper-style cabinet applications where the door needs to move up and away from the user. The design for upward-opening cabinet doors supports layouts in multimedia and workspace components where a front needs to clear monitors, equipment, or benchtops. The recommended door height of 13-3/4 inches targets smaller to mid-height doors commonly found in overhead storage runs or upper compartments, helping the stays operate in their intended balance range. With support for door thickness between 11/16 inch and 1-3/16 inch, the same mechanism can be used with a range of face constructions, from thinner doors to more substantial builds in this span. The presence of one left stay and one right stay gives the door support at both sides, which is valuable when the door is extended out during opening.

Why These Motion And Soft-Close Details Matter

The IF-H360W-16 upward-opening cabinet door mechanism set uses an inset receding motion so the door moves up and then back, which minimizes projection into the workspace when the cabinet is open. The up and under flipper slide classification indicates that the motion is coordinated for this two-stage travel, which matters when working around other fronts or equipment. The soft-close feature prevents slamming by decelerating the door near the closed position, limiting impact forces on the cabinet face and frame during routine use. Adjustable soft-closing speed gives an installer control over how firmly or gently the door settles, so the motion can be tailored to door weight within the supported thickness range of 11/16 inch to 1-3/16 inch. Using both a left stay and a right stay keeps the door supported throughout its arc, which helps the closing and soft-close action feel balanced and consistent from side to side once set.

Practical Questions About The IF-H360W-16 Mechanism

Choose This IF Series Set For Upward-Opening Doors

The Sugatsune IF Series inset receding door mechanism set IF-H360W-16 is tailored for upward-opening cabinet doors in the 13-3/4 inch height range, giving the motion hardware a clear design target. Its support for door thickness between 11/16 inch and 1-3/16 inch covers a practical spread of cabinet fronts encountered in shop and field work. With an up and under flipper slide action plus integrated soft-close and adjustable soft-closing speed, the set is structured to control both movement path and closing behavior. Selecting this left and right stay combination from Wurth Baer Supply aligns the door motion, door size, and closing action around a single coordinated mechanism.