Sugatsune IF Series 11/16" - 1-3/16" Door Thickness Inset Receding Door Mechanism Set with 1-Left Stay & 1-Right Stay, Recommended Door Height 16-13/16", - IF-H360W-19
Description
Sugatsune IF Series Inset Receding Door Mechanism
Sugatsune IF Series inset receding door mechanism set controls upward-opening cabinet doors so they lift and tuck away in an up and under motion, which keeps the door clear of the opening while the cabinet is in use. The mechanism is described as an Up and Under Flipper Slide, so the door moves up and then recedes, which helps on cabinets where a swinging door would be in the way of workspace or equipment. This set is specified for 11/16 inch to 1-3/16 inch door thickness, so it suits typical cabinet door constructions that fall within that range. The recommended door height is 16-13/16 inches, so the mechanism geometry is tuned for doors around that size, which supports smoother motion and consistent balance in that application. The set uses one left stay and one right stay, so the load is shared across both sides of the door for more stable travel throughout the opening and receding cycle.
Key IF Series Features For Cabinet Projects
- The product is identified as an Up and Under Flipper Slide, so the door travels upward and then recedes above the opening, which leaves the cabinet face clear while the compartment is accessed and worked from the front.
- The mechanism set is intended for upward-opening cabinet doors, so it supports lift-up fronts instead of side-hinged doors, which suits overhead cabinets in multimedia, workspace, or storage layouts where frontal clearance is limited.
- The set is specified for 11/16 inch to 1-3/16 inch door thickness, so it handles a practical range of common cabinet door builds, allowing design flexibility within that thickness window while maintaining proper engagement with the mechanism.
- The recommended door height of 16-13/16 inches means the geometry is matched to that size, which helps the stays manage weight and motion in a predictable way so the door tracks consistently through its up and under path.
- The configuration with one left stay and one right stay spreads support across both sides of the door, which promotes balanced lifting and closing so racking at the hinges side is reduced during repeated cycles.
- The mechanism set is part of the Sugatsune IF Series from Sugatsune America, so it aligns with their line of flipper slide solutions commonly used in multimedia and workspace components where doors need to move fully out of the work zone.
Mounting This Upward-Opening Door Mechanism
The Sugatsune IF Series inset receding door mechanism set is designed specifically for upward-opening cabinet doors, so the stays work with front panels that pivot up instead of swinging out. The Up and Under Flipper Slide classification indicates that once the door lifts, it recedes above the cabinet opening, so the mounting layout supports that dual motion and keeps the door clear of the user. With a specified door thickness range of 11/16 inch to 1-3/16 inch, the hardware layout is sized to sit correctly on doors within that profile, so the pivoting and sliding components align to the door edge and cabinet interior. The recommended door height of 16-13/16 inches sets a design reference, so installers can plan cabinet openings and door sizes around that figure for motion that stays smooth and controlled through the full travel.
Using This IF-H360W-19 Set In Real Projects
Where This IF Series Mechanism Works Best
The Sugatsune IF Series inset receding door mechanism set, identified by manufacturer part IF-H360W-19, is placed in the category of Overhead Flipper Slides and described as an Up and Under Flipper Slide, so it fits overhead cabinet situations where the door needs to clear work or equipment below. The product category listing under Shelf, Closet and Garage Organization and Multimedia and Workspace Components indicates that the mechanism is suitable for cabinets in storage areas and multimedia or workspace setups, where upward-opening fronts help keep aisles and work surfaces open. Its intended use on upward-opening cabinet doors means it serves applications such as overhead storage, equipment enclosures, or workspace cabinets in which a projecting swing door would interfere with adjacent fixtures. The recommended door height of 16-13/16 inches further suggests use on relatively compact overhead fronts rather than tall doors, so the motion stays controlled in tighter installations.
Details That Support Smooth, Repeatable Operation
This Sugatsune IF Series inset receding door mechanism set features a soft-close feature that prevents slamming, so when the door is brought down, the mechanism slows the final travel and reduces impact on the cabinet, which helps limit noise and stress on the structure. The adjustable soft-closing speed lets the installer tune how quickly the door settles into the closed position, which helps match the motion to the specific door thickness between 11/16 inch and 1-3/16 inch and the door height around 16-13/16 inches. The configuration of one left stay and one right stay works with this soft-close function by supporting the door from both sides, which helps the panel track evenly and keeps the closing action consistent over repeated cycles. As an Up and Under Flipper Slide, the mechanism carries the door up and then recedes it away from the opening, and when combined with soft-close, that motion ends in a controlled, damped close that is better suited to cabinets in multimedia and workspace environments where frequent access is expected.
Common Questions About IF Series Door Mechanisms
What type of cabinet doors is this IF Series mechanism set designed for?
The Sugatsune IF Series inset receding door mechanism set is designed for upward-opening cabinet doors, so it supports lift-up fronts where a traditional side-hinged door would interfere with access.
How does the up and under flipper slide motion affect cabinet use?
The Up and Under Flipper Slide motion lifts the door and recedes it above the opening, so the cabinet face stays clear while the compartment is in use, which helps around work areas and equipment.
What door thickness range does the IF-H360W-19 mechanism support?
The IF-H360W-19 mechanism set is specified for 11/16 inch to 1-3/16 inch door thickness, so it suits many common cabinet door constructions within that profile range.
Why is the recommended door height of 16-13/16 inches important?
The recommended door height of 16-13/16 inches means the mechanism geometry is tuned for doors around that size, so the lift and receding motion stays balanced and consistent.
How does the soft-close feature affect daily operation?
The soft-close feature prevents slamming by slowing the final closing travel, so it reduces impact, limits noise, and helps protect the cabinet during repeated openings and closings.
What is the benefit of adjustable soft-closing speed on this mechanism?
The adjustable soft-closing speed lets the installer match closing behavior to the specific door size within the design range, so the door settles in a controlled way for the application.
Selecting This IF-H360W-19 Mechanism For Your Build
The Sugatsune IF Series inset receding door mechanism set IF-H360W-19 brings together an Up and Under Flipper Slide layout, soft-close feature, and adjustable soft-closing speed to serve upward-opening cabinet doors that need to clear the workspace while closed. Its specified door thickness range of 11/16 inch to 1-3/16 inch and recommended door height of 16-13/16 inches define a clear design window, so cabinet and door dimensions can be planned around the mechanism for predictable performance. With one left stay and one right stay supporting the door, the set is suited to overhead, multimedia, or workspace cabinets where stable, repeatable motion and a controlled close are important to the finished installation.