Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/4 inch overlay hinge describes a semi-concealed, double demountable cabinet hinge that is built for face-frame cabinets using a 1/4 inch overlay. The hinge design positions the door with a consistent 1/4 inch overlap on the face frame, which helps installers hit uniform reveals across a run of cabinets. This hinge is classified as a semi-concealed hinge, so part of the hardware stays hidden inside the cabinet while a portion remains visible, giving a clean but serviceable look on face-frame jobs. As a double demountable cabinet hinge, it is designed to slide into pre-routed slots in both the door and the frame, which lets the installer remove or refit the door without disturbing the hinge screw setting. The self-close function comes from a dual-spring mechanism that pulls the door closed with quiet, consistent power once it reaches the closing zone.
This semi-concealed face-frame hinge is described as a double demountable design that slides into pre-routed slots, so accurate routing in the frame and door establishes the mounting geometry. Once the frame and door slots are cut, the hinge body engages these slots to position the door for a 1/4 inch overlay on the face frame. The hinge provides full 3-way adjustability, so after the door is hanging, the installer can shift the door up or down, in or out, and side to side using the hinge adjustment range. That adjustability allows for dialing in even gaps between doors, matching door depth with adjacent fronts, and correcting small layout variations without changing the routed locations. The dual-spring self-closing action then acts on the adjusted position, consistently pulling the door back to the tuned closed alignment.
This Amerock Corporation hinge is identified as a semi-concealed face-frame, double demountable cabinet hinge with a 1/4 inch overlay. That combination places it in semi-concealed hinges used on face-frame cabinetry where the door edge overlays the frame by 1/4 inch. Because the hinge slides into pre-routed slots, it fits cabinet and door layouts that are machined specifically to accept a double demountable hinge, making it suitable for new work or refacing jobs that follow this pattern. The oil rubbed bronze finish is visible on the exposed parts of the hinge, so it aligns with cabinet projects that use oil rubbed bronze decorative hardware and trims to maintain a consistent appearance on doors and frames.
The double demountable construction of this hinge allows both the door and frame sides of the hinge to engage pre-routed slots, so once those slots are cut, the hinge can be removed and reinstalled repeatedly without changing the base routing. This helps during finishing or service work, because the door can be lifted off the cabinet while the hinge reference remains fixed in the wood. The hinge offers full 3-way adjustability, so a door can be shifted vertically, horizontally, and in depth relative to the face frame, which is useful for setting reveals and keeping doors flush with neighbors after installation. The dual-spring self-closing mechanism then takes the tuned door position and pulls the door closed with consistent pressure, which keeps the adjusted alignment stable at the closed position during everyday use. Together, the demountable slot engagement and 3-way adjustment provide a workflow where machining, hanging, and final tuning all work off the same hinge geometry on the cabinet.
The hinge is described as a semi-concealed face-frame, double demountable cabinet hinge, so it is suited to face-frame cabinetry that is machined for this demountable hinge style.
The hinge is identified as a 1/4 inch overlay hinge, so it positions the cabinet door to overlap the face frame by approximately 1/4 inch, creating a consistent narrow reveal around the opening.
The hinge is described as a double demountable cabinet hinge that slides into pre-routed slots, meaning both door and frame sides engage routed slots so the door can be removed without changing hinge location.
The hinge features full 3-way adjustability, so during installation the door can be moved vertically, horizontally, and in depth to fine-tune reveals and alignment after the hinge is mounted.
The hinge uses a dual-spring mechanism for quiet, consistent self-closing power, which pulls the door closed smoothly and holds it shut under spring tension during everyday cabinet use.
The hinge is finished in oil rubbed bronze, so the visible parts present a dark, traditional look that can coordinate with other oil rubbed bronze cabinet hardware on the project.
The Amerock self-close 1/4 inch overlay double demountable hinge, identified as BPR8701ORB, combines a semi-concealed face-frame layout with pre-routed slot engagement, full 3-way adjustability, and a dual-spring self-closing action. That mix supports cabinet work where accurate machining, removable doors, and tuned reveals are part of the workflow, while the oil rubbed bronze finish keeps the visible hardware aligned with matching cabinet components. For face-frame projects using a 1/4 inch overlay and a demountable hinge plan, this hinge provides the described adjustment and self-closing functions in a finish suited to traditional cabinet hardware lines.