2' RV40 Single Slot Shelf Standard For Adjustable Runs

2' RV40 single slot shelf standard from Reeve Store Equipment Company provides a 24 inch vertical track for supporting shelving in closet, garage, or general storage layouts. The 11/16 inch wide by 7/16 inch deep profile gives a compact standard that fits tight layouts while still presenting a clear, usable slot for shelf brackets. The satin zinc finish on the RV40 standard provides a bright, neutral appearance that works with typical metal shelving components. This RV40 standard is typically used with RV41, RV43, RV81, and RV83 series brackets, creating a coordinated support system when laying out straight runs of adjustable shelving. The standard is made from 0.0625 inch thick cold rolled steel, giving a rigid backbone for bracket engagement so shelves stay steady under normal use. Adjustable slots in 1 inch increments allow shelf positions to be shifted as storage needs change along the wall.

Key RV40 Shelf Standard Details For Planners

• The 24 inch length gives two feet of vertical adjustment space, enabling multiple shelf levels to be arranged within a short wall height for cabinets, closets, or storage sections.
• The RV40 single slot design is typically used with RV41, RV43, RV81, and RV83 series brackets, so bracket selection and layout can follow a consistent Reeve Store Equipment Company standard system.
• The 11/16 inch width and 7/16 inch depth profile help the standard sit close to the mounting surface, which keeps shelving hardware from projecting excessively into the storage area.
• Adjustment in 1 inch increments allows installers to set repeatable shelf elevations along a run, simplifying layout when matching heights across multiple standards on a wall.
• Screwholes on 6 inch centers provide regular fastening points along the full 24 inch length, helping the standard pull tight to the mounting surface at consistent intervals.
• The 0.0625 inch thick cold rolled steel material provides a solid track for brackets to lock into, which supports dependable engagement over the full length of the standard.

Installation-Oriented Shelf Standard Mounting Details

This Reeve RV40 shelf standard uses pre-punched screwholes on 6 inch centers along its 24 inch length, giving installers fixed reference points when fastening to studs or other backing. Recommended fasteners are #7 flat head screw, which matches the hole sizing and lets the screw seat flush against the steel face so brackets slide into the single slot without interference. The 11/16 inch width and 7/16 inch depth keep the standard relatively low profile, which helps it nest cleanly against typical framing or panel surfaces. Adjustment in 1 inch increments means that once one standard is set, adjoining standards can be aligned by counting matching slot positions rather than re-measuring every shelf height.

Using The Reeve RV40 Standard In Shelf Layouts

Where This Reeve RV40 Shelf Standard Fits Best

The Reeve RV40 shelf standard is part of a shelf, closet, and garage organization family, so it suits wall-mounted storage where adjustable shelving is required. As a shelf standards and brackets component, the RV40 creates the vertical member that brackets lock into, giving structure to the system. The 24 inch length is useful where ceiling height or cabinet openings limit space, such as lower closet sections, short wall segments, or under-cabinet storage. Its single slot design is typically used with RV41, RV43, RV81, and RV83 series brackets, allowing those brackets to carry shelves, bins, or similar loads along the wall. The satin zinc finish coordinates with brasstone and Brillatone (zinc) finishes offered in the same family, which helps keep hardware appearance consistent across a wider installation.

Why RV40 Details Matter For Repeatable Adjustment

The RV40 shelf standard is adjustable in 1 inch increments, so installers can create consistent shelf spacing for multiple bays by relying on the slot pattern instead of individual measurements. Each 1 inch step becomes a fixed reference, which helps maintain level shelf lines across several standards mounted side by side. Screwholes on 6 inch centers simplify fastening because each hole represents a predictable anchor location, which is helpful when aligning with known backing patterns or balancing the number of fasteners along the 24 inch height. The 0.0625 inch thick cold rolled steel construction resists deformation at the slot area, which supports reliable bracket seating during repeated shelf height changes. Its 11/16 inch wide by 7/16 inch deep section keeps hardware mass close to the wall, reducing interference with stored items while still giving enough engagement depth for the matching RV41, RV43, RV81, and RV83 brackets to lock securely.

RV40 Shelf Standard Questions From Installers

Selecting This RV40 Standard For Your Layout

The 2' RV40 single slot shelf standard in satin zinc finish gives a 24 inch, cold rolled steel track with 1 inch increment adjustment and screwholes on 6 inch centers for consistent mounting. Its typical use with RV41, RV43, RV81, and RV83 brackets means it fits directly into Reeve shelf standards and brackets layouts. When a compact, vertically adjustable standard is needed for closet, garage, or general storage work, this RV40 configuration from Wurth Baer Supply provides a defined set of dimensions and fastening details you can apply directly to your next project.