Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
5' RV40 single slot shelf standard from Reeve Store Equipment Company provides a vertical track for adjustable shelving using compatible brackets, so installers can set shelf heights to suit changing storage needs in closets, garages, or retail displays. The standard is part of the RV40 series and is typically used with RV41, RV43, RV81, and RV83 series brackets, tying directly into a known bracket family so layouts follow a familiar pattern on repeat jobs. Its satin zinc finish, described as Brillatone (Zinc), gives a neutral metallic look that works alongside Brasstone options in the same line when projects mix finishes. With a 5 foot length in the 40-5 part number, the standard spans a useful vertical range for mid-height walls, giving enough adjustment positions without running past typical residential or light commercial wall heights.
This RV40 shelf standard is adjustable in 1 inch increments, so every slot along the 5 foot length shifts shelf elevation by exactly 1 inch, simplifying layout measurements and repeated installations across multiple walls. Screw holes are on 6 inch centers, giving a predictable fastening pattern down the length that aligns easily with standard stud spacing when planning verticals. Recommended fasteners are #7 flat head screws, so the countersunk heads sit flush to the standard surface, helping brackets slide into the single slots without interference from proud screw heads. The 11/16 inch width combined with 7/16 inch depth gives a mounting footprint that works well on typical wall substrates, balancing bearing area with a compact profile so standards can be placed near inside corners or next to casework.
The 5 foot RV40 single slot shelf standard fits projects that use Reeve RV41, RV43, RV81, and RV83 series brackets, so installers working with that bracket family can extend or modify existing layouts using the same geometry. In closet and garage organization projects, the 5 foot length lands within common vertical wall space between base surfaces and ceiling lines, giving a useful span for both lower and higher shelves without excess unused track. For retail or workshop shelving, the 11/16 inch wide profile keeps the standard visually narrow, which helps maintain clean sightlines along merchandise rows or tool walls while still giving a reliable track for brackets. The satin zinc Brillatone finish works alongside Brasstone options described in the same line, so designers can keep structural details consistent while switching visible bracket or trim finishes from one area to another.
Adjustment in 1 inch increments means installers can translate drawings directly to on-wall positions by counting slots, reducing layout time when multiple bays share the same elevation plan. Screw holes on 6 inch centers provide a repeating fastening rhythm down the 5 foot length, which helps maintain even load transfer into the wall structure across the full run of the standard. The 0.0625 inch thick cold rolled steel construction keeps slot geometry consistent along the upright, supporting accurate bracket seating from top to bottom so shelves stay aligned when spanning between paired standards. Working with the RV41, RV43, RV81, and RV83 bracket series also supports repeatable results, because the bracket tongues are designed for this RV40 profile, helping brackets register in the single slots with a familiar feel on every job. The compact 7/16 inch depth keeps the standard close to the mounting surface, which helps the brackets project predictably from the wall so shelf depths match plan dimensions across multiple units.
The 5' RV40 single slot shelf standard is typically used with RV41, RV43, RV81, and RV83 series brackets, so those bracket models share the correct interface for the RV40 track.
The RV40 standard length of 5 feet creates a mid-height vertical run, giving multiple shelf positions between lower and upper elevations in closets, garages, or display walls.
The RV40 shelf standard uses 0.0625 inch thick cold rolled steel, giving a uniform section so bracket slots maintain consistent shape along the full upright.
The RV40 standard has screw holes on 6 inch centers, creating a regular fastening pattern down the length that supports even load distribution into the wall.
The RV40 standard is adjustable in 1 inch increments, so each slot change raises or lowers a compatible bracket by exactly 1 inch for straightforward layout.
The RV40 shelf standard lists #7 flat head screws as recommended fasteners, so the screw heads sit flush with the standard surface during mounting.
The 5' RV40 single slot shelf standard in satin zinc from Reeve Store Equipment Company combines 1 inch adjustment increments, 6 inch screw hole spacing, and a 0.0625 inch thick cold rolled steel profile to support repeatable shelving layouts on projects using RV41, RV43, RV81, and RV83 brackets. The 11/16 inch wide by 7/16 inch deep section keeps the track compact on the wall while still presenting a dependable interface for compatible brackets across the 5 foot run. Selecting this RV40 40-5 model lets installers extend an established Reeve bracket system into new bays or rooms while holding to the same geometry, finish family, and mounting rhythm from one installation to the next.
Sold In: 1 Each
