Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12 inch RV43 glass shelf bracket is a standard-duty shelf bracket from Reeve Store Equipment Company designed for glass shelving in store or storage layouts. The bracket uses the Reeve Model RV43 design, so it matches applications where RV43 components are already specified. Its .080 inch thick tempered steel construction supports typical glass shelf loads in a standard-duty setting. The satin zinc finish presents as a Brillatone zinc surface, which suits projects needing a bright metal look on exposed shelf supports. With a weight rating of 50 lb per pair based on length, the bracket supports typical merchandising or storage loads when paired correctly. The bracket length of 12 inches matches shelves with similar depth, helping support glass evenly across its projection from the standard.
This RV43 standard-duty bracket can be adjusted to straight, 7, 15, 30, and 45 degree downslants, which lets installers set glass shelves to a sightline that suits product display or viewing angles. On 14 inch lengths in the same series, the adjustment range also extends to a 60 degree downslant, which is relevant when coordinating different shelf depths in one installation. The bracket uses two engagement teeth, giving it multiple contact points in the standard to help it settle securely in the upright. A shelf lip at the end of the bracket presents a physical stop that helps position the glass shelf at the front edge, aiding repeatable alignment along a run of brackets.
The 12 inch RV43 standard-duty glass shelf bracket sits in the Shelf Standards and Brackets class and is referenced as typically used with RV20 and RV40 series standards. That pairing places the Reeve 43-12 part in store fixture, closet, or garage organization layouts that are already built around RV20 or RV40 uprights. Its category as Shelf, Closet and Garage Organization and Shelf Brackets and Standards positions it for projects where adjustable shelving is required rather than fixed supports. The 12 inch length works with glass shelving sized to similar depth, which is common in retail bays needing a balance between depth and aisle space. With a satin zinc finish, the bracket visually coordinates with zinc standards from the same manufacturer, supporting a consistent look across uprights and supports in visible installations.
The RV43 bracket's ability to adjust to straight, 7, 15, 30, and 45 degree downslants offers a range of merchandising angles from flat storage to forward-tilted display, which helps present products at a viewing angle suited to the application. In the broader RV43 family, the 14 inch length can also adjust to 60 degrees, so when combining 12 and 14 inch brackets in one run, planners can specify steeper tilt only where deeper shelves are used. The two engagement teeth built into this bracket create a defined fit into compatible standards, which supports consistent vertical positioning from one bay to the next. The shelf lip at the end of the bracket sets a repeatable stop at the front of the glass shelf, so multiple brackets along a shelf hold the leading edge on the same line. The .080 inch thick tempered steel stock gives the arm a solid profile under typical standard-duty loads, which matters when tying into the stated 50 lb per pair rating based on length. With that rating, layout decisions on how many bracket pairs to use per shelf can be tied directly to the published capacity, simplifying planning for load distribution across a fixture run.
The 12 inch RV43 standard-duty glass shelf bracket is described as a glass shelf bracket, so it is intended to support glass shelving at a matching depth.
The RV43 bracket is noted as typically used with RV20 and RV40 series standards, so it is intended to operate within those Reeve standard systems.
The RV43 bracket series has a weight rating of 50 lb per pair based on length, which guides how much load each pair of brackets can support on a shelf.
This standard-duty bracket can be set to straight, 7, 15, 30, and 45 degree downslants, with 14 inch lengths in the family also adjustable to a 60 degree downslant.
The Reeve 43-12 bracket uses .080 inch thick tempered steel with a satin zinc finish described as Brillatone zinc, suiting exposed shelf support applications.
The RV43 bracket uses two engagement teeth for secure seating in the standard and a shelf lip at the end, which together help position and hold the glass shelf.
The 12 inch RV43 standard-duty glass shelf bracket from Reeve Store Equipment Company ties directly into RV20 and RV40 series standards, making it suited to projects already built around those uprights. Its .080 inch thick tempered steel construction, satin zinc finish, adjustable downslant settings, and 50 lb per pair rating based on length give planners a defined set of performance details to design around. For shelf runs that need a 12 inch depth with adjustable angles and a consistent zinc look, this Reeve 43-12 bracket aligns with the RV43 system used across many shelf, closet, and garage organization layouts.
Sold In: 1 Each
