Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
4' RV40 single slot shelf standard defines a 4 foot, single-slot vertical support from Reeve Store Equipment Company that sets up adjustable shelving runs where the standard length matches typical closet or wall bay heights. The satin zinc finish, described as Brillatone (Zinc), provides a bright, plated surface that fits commercial and residential shelving layouts visually and resists surface wear in normal use. The standard is .0625 inch thick cold rolled steel, so the upright offers a solid, rigid track for shelf brackets where installers want steel rather than lighter materials. Its 11/16 inch width and 7/16 inch depth establish a compact profile that fits tight wall spaces while still giving enough bearing area for supported brackets. As part of the Reeve Model RV40 line, this standard works in the same system family typically used with RV41, RV43, RV81 and RV83 series brackets, keeping hardware consistent across a project.
This Reeve RV40 single slot shelf standard is drilled with screwholes on 6 inch centers, so the fastener layout repeats up the 4 foot length for straightforward mounting down stud lines or into continuous backing. The slot pattern is adjustable in 1 inch increments, meaning each vertical movement of a compatible bracket follows a 1 inch step that keeps shelving elevations consistent bay to bay. Recommended fasteners are #7 flat head screw, so the countersunk shape seats cleanly in the holes and helps keep the standard tight to the wall surface. The single-slot design works within the Reeve shelf standards and brackets class, providing a linear support track that pairs with designated bracket series while leaving the surrounding wall area clear.
The Reeve RV40 single slot shelf standard in satin zinc finish sits within the Shelf, Closet & Garage Organization category and the Shelf Standards & Brackets product class, so it is intended as a vertical support member in adjustable shelving systems. At 4 feet long, this 40-4 part number suits mid-height installations such as reach-in closets, storage walls above work surfaces, or retail gondola uprights where full-height standards are not required. The available lengths listed for this RV40 model - 12, 24, 30, 36, 48, 60, 72, 84 and 96 inches - show that this standard is part of a coordinated length series, allowing layouts that combine 4 foot sections with shorter or taller uprights in the same line. The satin zinc Brillatone finish ties into Brasstone and Brillatone options named for the RV40 family, so visible hardware can stay consistent across different wall sections and fixture types. As noted, this model is typically used with RV41, RV43, RV81 and RV83 series brackets, placing it within a known Reeve Store Equipment Company bracket system for shelf support.
The adjustable in 1 inch increments feature means the RV40 slotting provides a predictable vertical grid, so shelf elevations can be repeated accurately from bay to bay in closets, garages, or commercial storage runs. This 1 inch step pattern helps installers coordinate shelf clear openings with commonly stored items, using the same settings throughout a project for a uniform result. Screwholes on 6 inch centers standardize the fastening rhythm up the length of the upright, making it easy to pre-mark walls and drill once the first hole is located over a stud or backing member. Using the recommended #7 flat head screw ties directly to the hole sizing and countersink form, allowing the fastener head to sit flush and keep the bracket path unobstructed along the single slot. The .0625 inch thick cold rolled steel material gives the vertical track the rigidity needed so that brackets from series such as RV41, RV43, RV81 and RV83 seat reliably in the slot, helping maintain square shelf positions over time. With an 11/16 inch wide by 7/16 inch deep section, the standard remains slim on the wall while still providing enough structure to carry the Reeve bracket engagement in typical closet and organization applications.
The Reeve RV40 single slot shelf standard identified as 40-4 is 4 feet long, so it matches applications needing a 48 inch vertical support for shelving layouts.
The RV40 shelf standard uses 1 inch increment slots, letting installers set bracket and shelf heights on a consistent 1 inch grid for repeatable spacing across multiple bays.
The RV40 single slot shelf standard is typically used with Reeve RV41, RV43, RV81 and RV83 series brackets, keeping the support and bracket system within one coordinated family.
The 40-4 RV40 standard is made from .0625 inch thick cold rolled steel with a satin zinc Brillatone finish, giving a steel structure with a bright plated surface.
This RV40 shelf standard has screwholes on 6 inch centers, so the fastening points repeat regularly up the 4 foot length for even wall attachment.
The recommended fasteners for this RV40 shelf standard are #7 flat head screw, which match the hole sizing and sit flush to maintain a clear bracket path.
The Reeve RV40 single slot shelf standard in satin zinc finish, 4 feet long and built from .0625 inch thick cold rolled steel, provides a defined combination of length, profile, and adjustment pattern for organized shelving projects. With its 11/16 inch wide by 7/16 inch deep section, 1 inch increment adjustability, and screwholes on 6 inch centers set up for #7 flat head screw, this 40-4 model fits applications where a mid-height upright and precise vertical grid are needed. For shelf, closet, or garage organization builds that use RV41, RV43, RV81 or RV83 series brackets, this RV40 standard aligns with the same system family so a run of uprights can share the same Reeve Store Equipment Company design.
Sold In: 1 Each
