Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 inch left hand adjustable shelf bracket describes a Reeve Store Equipment Company RV83 steel bracket that supports shelving on a downslant, so you can set product or stored items at a viewing angle while maintaining solid metal support. The .080 inch thick tempered steel construction resists bending under normal rated loads, which helps shelves stay true in everyday retail or storage use. The Brillatone zinc finish provides a hard metal surface over the steel, which helps the bracket tolerate contact from shelf standards and shelves in typical indoor environments. The bracket is the left flange version of the RV83 model, so it engages standards on the left side of a shelf bay in systems designed around this pattern. When paired correctly, the rated geometry of the bracket helps keep shelves seated securely in the standard slots.
The RV83 adjustable downslant shelf bracket can be set to straight, 7, 15, 30, or 45 degree downslants at the 10 inch length, so shelving can be positioned flat or tilted as needed for display or access. These defined angle options allow installers to repeat the same pitch across multiple brackets, which keeps long shelves aligned visually and functionally along a run. The three engagement teeth are designed to engage the mating slots in compatible standards, which helps the bracket lock into place once the desired angle is set. With the 50 lb per pair rating, based on length, installers can plan shelf spacing and load distribution around that guideline.
The Reeve RV83 model, identified here as the 83-L-10 left flange, is typically used with RV20 and RV40 series standards, so it ties directly into that specific upright system for building adjustable shelving runs. Because the bracket is 10 inches long, it suits shelf depths sized around that reach where a moderate projection from the standard is appropriate. The left flange configuration positions the supporting steel on the left side of the standard slot pattern in systems laid out to receive left and right brackets, which matters when building mirrored bays. The three engagement teeth interface with the standard, which helps the bracket resist accidental lift-out under normal vertical loading in day-to-day operation.
The ability to adjust this bracket between straight, 7, 15, 30, and 45 degree downslants allows a single RV83 component to serve multiple presentation or access needs, saving the effort of stocking separate fixed-angle brackets. Each defined angle position creates a repeatable tilt, which is useful when aligning several shelves along RV20 or RV40 series standards so every level presents product or storage bins at the same pitch. The .080 inch thick tempered steel body carries these angles without changing the bracket geometry under rated loading, which supports consistent spacing between brackets and keeps shelf edges tracking evenly. The 50 lb per pair rating, tied to the bracket length, gives a straightforward planning point for how densely to position items on slanted or flat shelves so the system stays within its intended use.
The 83-L-10 bracket is a Reeve RV83 model typically used with RV20 and RV40 series standards, so it fits shelf runs built around those specific upright standards.
The 10 inch RV83 bracket has a weight rating of 50 lb per pair, based on length, which sets expectations for lighter to moderate-duty shelving loads.
The Reeve 83-L-10 bracket is made from .080 inch thick tempered steel, providing a defined metal section that supports shelves within the stated rating.
The RV83 bracket can be adjusted to straight, 7, 15, 30, or 45 degree downslants at this length, allowing flat or angled shelving layouts from the same part.
The 10 inch left hand bracket uses a Brillatone zinc finish, giving the tempered steel a metallic appearance suited to indoor retail or storage settings.
The left flange RV83 version positions on the left side of RV20 or RV40 series standards, which helps create matched left and right support pairs in shelf bays.
The 10 inch left hand adjustable shelf bracket from the Reeve RV83 family provides tempered steel support, Brillatone zinc finish, and defined downslant angles that suit typical retail and storage applications. Its 50 lb per pair rating, based on length, and three-tooth engagement into RV20 or RV40 series standards help create consistent, repeatable shelving runs. When a shelf layout calls for a 10 inch projection with the flexibility to run either flat or angled levels, this 83-L-10 left flange bracket aligns with that requirement.
Sold In: 1 Each
