Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
6' RV40 single slot shelf standard is a Reeve Store Equipment Company upright that supports adjustable shelving in retail, closet, and storage layouts where consistent vertical spacing matters. The satin zinc finish provides a neutral, reflective surface that blends with typical metal shelving components while presenting a clean, uniform appearance along a run. The single slot design controls bracket engagement in one vertical line, which helps keep bracket positioning predictable when matching multiple standards on a wall. With a 6 foot length, installers can span typical cabinet or wall sections in one piece, reducing layout breaks across most residential-height applications. The RV40 designation identifies this standard as the Reeve model typically matched with RV41, RV43, RV81, and RV83 series brackets, so the slot profile and spacing are set up to work with those series across a whole system.
This 6 foot RV40 shelf standard mounts through pre-punched screwholes set on 6 inch centers, so wall attachment follows a consistent vertical pattern that matches typical layout marks. The manufacturer recommends #7 flat head screw fasteners, which indicates the hole size and head profile are suited to that screw type for flush seating. With shelf positions adjustable in 1 inch increments, the slot pattern lets installers move RV41, RV43, RV81, or RV83 brackets up or down quickly while keeping bracket pairs at the same elevation on paired standards. The 11/16 inch width and 7/16 inch depth dimensions define how much space the upright occupies on the wall, helping you plan clearances behind shelves or inside cabinets where depth and reveal control are important.
The Reeve RV40 shelf standard is identified in the product data as typically used with RV41, RV43, RV81, and RV83 series brackets, so its slot profile and spacing are set up around those bracket families. That pairing lets you build runs where every upright and bracket connection follows the same interface, which matters when assembling long walls of shelving or symmetrical closet sections. Because the standard is 6 feet long, a single piece can cover a tall section of wall in one continuous run, reducing the number of joints where alignment could shift. The 11/16 inch width helps keep rows of RV40 standards visually tight, which is useful when you are setting multiple uprights side by side in a merchandising bay or along a closet wall and want the metalwork to read as a controlled grid. With the 7/16 inch depth, the standard occupies modest projection from the wall, leaving more usable shelf depth for product or storage.
The RV40 standard is punched for 1 inch increment adjustment, so every bracket position follows a simple one-inch grid that can be repeated from bay to bay. That regular spacing helps when matching shelf heights across several uprights or when resetting merchandise to a new planogram that calls out specific heights. Screwholes on 6 inch centers give a second, larger grid that governs how the standard ties into the wall or backing, so each fastener location lines up in a predictable pattern along studs or blocking. With 0.0625 inch thick cold rolled steel construction, the upright provides a consistent, flat surface around each slot, contributing to smooth bracket engagement over time. The satin zinc finish supports easy visual reading of the slot pattern and hole locations, which matters when you are marking heights, counting increments, or lining up opposing standards so brackets sit level across a span.
The RV40 shelf standard in this listing is 6 feet long, so it spans typical wall and closet heights in a single continuous upright for cleaner vertical alignment.
The RV40 standard is typically used with Reeve RV41, RV43, RV81, and RV83 series brackets, so those bracket families are set up to engage its slot pattern.
The RV40 shelf standard has screwholes on 6 inch centers, giving a regular vertical pattern that simplifies layout and helps distribute loads along the wall.
The manufacturer lists #7 flat head screw fasteners as recommended, which matches the hole size and allows the screw heads to sit properly at the surface.
The RV40 shelf standard adjusts in 1 inch increments, so shelf brackets can be moved up or down in one-inch steps for precise height spacing.
The RV40 standard measures 11/16 inch wide by 7/16 inch deep, so it presents a slim profile on the wall while still supporting bracket engagement.
The 6 foot RV40 single slot shelf standard in satin zinc finish gives installers a defined 1 inch adjustment pattern, 6 inch fastener spacing, and a slim 11/16 inch by 7/16 inch profile for tight wall runs. With 0.0625 inch thick cold rolled steel and a model designation that aligns with RV41, RV43, RV81, and RV83 brackets, it fits directly into Reeve Store Equipment Company shelving systems. Select this RV40 size and finish when your layout calls for a 6 foot upright that supports consistent bracket alignment and a clean, satin zinc appearance along the wall.
Sold In: 1 Each
