Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch RV41 standard duty glass shelf bracket gives you an 18 inch long support arm designed for standard duty glass shelving in retail or storage layouts. The bracket is part of the Reeve Store Equipment Company RV41 series, so it follows a known standard for store fixture runs. It is typically used with RV20 and RV40 series standards, which ties the bracket into upright standards from the same system for consistent alignment. The bracket is made from .080 inch thick tempered steel, so the arm resists flex during normal shelf loading. A satin zinc finish, listed as Brillatone (Zinc), provides a neutral metallic appearance that matches typical commercial standards while keeping the surface smooth for glass contact. This RV41 model is classified as a shelf standards and brackets component, so it fits directly into shelf, closet, and garage organization layouts that follow that class.
This Reeve RV41 standard duty glass shelf bracket is described as typically used with RV20 and RV40 series standards, so the engagement teeth and hook geometry are tuned for those standards within the same system. The two engagement teeth work with the upright slots on compatible standards, creating a defined contact pattern along the standard rather than a single point. That engagement style helps the bracket stay seated when shelves are loaded or adjusted during reset work. The shelf lip at the end of the 18 inch arm holds the glass edge in place along the length of the support, which helps placement repeatability when shelves are moved up or down on the standards. The satin zinc finish on the bracket matches the Brillatone zinc finish option referenced for the RV41 series, so brackets installed across a wall run will maintain a consistent look.
The 18 inch RV41 standard duty glass shelf bracket is part of Reeve Store Equipment Companys shelf standards and brackets line, so it fits into shelf, closet, and garage organization concepts that use compatible standards. The bracket length is listed as 18 inches, which matches common glass shelf depths in many retail and storage runs where deeper display or storage space is required. Because the RV41 series is typically used with RV20 and RV40 standards, this 41-18 bracket supports fixture layouts that already use those uprights, allowing consistent spacing along the wall. The tempered steel construction supports the stated standard duty load range of 130-350 lb per pair, based on length, so the 18 inch size can be selected within that series according to shelving depth needs and load planning. The satin zinc, or Brillatone zinc, finish provides a uniform metallic tone that works visually with many standard uprights and trim elements in commercial environments.
The RV41 glass shelf bracket design incorporates stabilizers to reduce sway, so once installed on appropriate standards the bracket resists side-to-side movement, helping shelves stay square to adjacent fixtures. Two engagement teeth on the bracket interface with the vertical slots on compatible standards, creating a dual-point engagement that supports the bracket under vertical loads and reduces rocking during resets. The shelf lip at the end of the bracket without a flange forms a small front stop for the glass, which helps the shelf locate consistently each time it is placed on the arm while keeping the front edge open for display. The .080 inch thick tempered steel arm works with this lip detail to carry the stated 130-350 lb per pair weight range within the RV41 length series, so the 18 inch bracket can be integrated confidently where standard duty performance is required. Across a run of RV41 brackets, the shared satin zinc finish keeps each support visually coordinated with the RV20 and RV40 standards in the same system.
The 18 inch RV41 standard duty glass shelf bracket is described specifically as a glass shelf bracket, so its length and lip detail are set up for supporting glass shelving panels.
The RV41 bracket uses .080 inch thick tempered steel, which provides a rigid arm that resists flex and helps maintain level support under its standard duty weight ratings.
The RV41 shelf bracket is described as typically used with RV20 and RV40 series standards, tying it into those upright systems for coordinated fixture layouts.
The RV41 series has a 130-350 lb per pair weight rating, based on length, so shelf depth selection can be aligned to expected merchandise or storage loads.
The RV41 bracket has a shelf lip at the end with no flange, helping hold the glass edge in position while keeping the front edge clear for product visibility.
The RV41 bracket uses stabilizers and two engagement teeth to reduce sway and rocking on compatible standards, supporting steadier shelves during everyday loading.
The 18 inch RV41 standard duty glass shelf bracket from Reeve Store Equipment Company combines .080 inch thick tempered steel, a satin zinc Brillatone finish, and a defined 130-350 lb per pair weight rating based on length. Its typical use with RV20 and RV40 series standards positions this 41-18 bracket well for new runs or expansions tied to that system. For shelf, closet, and garage organization layouts that require an 18 inch glass shelf depth with a front lip and stabilized support, this RV41 bracket offers a consistent, system-matched option ready to slot into your next fixture plan.
Sold In: 1 Each
