Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
6 inch RV41 glass shelf bracket is a standard-duty bracket that supports glass shelving while matching common store fixture layouts. The 6 inch length provides a compact projection that fits shorter shelves where deeper brackets are not needed in merchandising runs. The satin zinc finish gives a Brasstone and Brillatone style appearance that blends with typical commercial standards and trims in retail or storage spaces. The bracket is part of the Reeve Model RV41 line, so it follows a consistent form used across multiple shelf lengths in the same system. Being in the shelf standards and brackets class, it is suited to applications where adjustable shelf positions are laid out on uprights to handle changing product sets. The bracket design focuses on stabilizing shelves in normal store and closet environments so merchandise, containers, or display items sit level and steady on the glass surface.
The RV41 designation ties this 6 inch bracket to Reeve standards used in shelf, closet, and garage organization layouts, so it slots into uprights in a repeatable way. Being typically used with RV20 and RV40 series standards, it is shaped to engage those standards as part of a matched system, which helps maintain even shelf spacing and alignment across a run of uprights. The bracket uses two engagement teeth, giving it two contact points in the standard that help it seat firmly and resist dislodging under vertical load. The shelf lip with no flange works with glass shelves by catching the front edge without wrapping over the top, which allows the glass to be installed and removed without interference from an overhanging tab. Built-in stabilizers reduce sway at the standard connection, which helps shelves stay square to the uprights so product lines up cleanly along the run.
This 6 inch RV41 standard-duty glass shelf bracket sits in the shelf standards and brackets category, placing it in typical store fixture, closet, and garage organization applications where adjustable shelves are planned. The Reeve Store Equipment Company branding and Reeve Model RV41 designation align it with commercial fixture systems used in retail environments, back rooms, and organized storage areas. Available finishes listed as Brasstone and Brillatone (zinc) give options that coordinate with standards and other hardware in similar tones, which is useful when tying into existing uprights. The satin zinc finish on this version offers a neutral metallic look that works with glass, laminate, or other shelf materials in those environments. Because it is a glass shelf bracket, its geometry suits the flat, uniform thickness of glass shelving commonly used in merchandising displays and organized storage.
The manufacturer part number 41-6 clearly identifies this bracket as the 6 inch length within the RV41 line, which helps specifiers and installers match or replace brackets by length across an installation. The standard-duty weight rating of 130-350 lb per pair, based on length, gives a defined performance range for the RV41 family, allowing planners to design shelf spacing and spans that stay within that bracket capacity. The .080 inch thick tempered steel construction adds rigidity to the 6 inch arm, so the shorter projection can carry its rated loads without excessive deflection, helping glass remain level along the front edge. The two engagement teeth help the bracket seat repeatedly in RV20 and RV40 series standards, which is useful when resetting shelves to new planograms or reorganizing storage. Stabilizers that reduce sway limit side-to-side movement when products are handled, helping glass stay aligned and reducing readjustment during resets. The shelf lip at the end, with no flange, retains the front of the glass while leaving the top surface unobstructed, which simplifies cleaning and allows product to sit fully on the glass without catching on an overhanging tab.
The 6 inch RV41 standard-duty glass shelf bracket is designed for glass shelving, so its lip and top surface geometry suit flat glass commonly used in store fixtures and organized storage.
The RV41 model is typically used with RV20 and RV40 series standards, so it fits into those uprights for adjustable shelving layouts in matching systems.
The RV41 bracket family has a standard-duty weight rating of 130-350 lb per pair, based on length, guiding shelf spans toward typical retail and storage loads within that range.
The RV41 bracket has two engagement teeth, giving two contact points in the standard that help it seat firmly and resist dislodging when shelves are loaded or adjusted.
The .080 inch thick tempered steel construction provides a stiff bracket arm, helping the 6 inch projection support glass shelves without excessive bending during normal loading.
The shelf lip at the end of the bracket, with no flange, catches the glass edge to resist forward slip while keeping the top clear so the shelf sits flat and unobstructed.
The 6 inch RV41 standard-duty glass shelf bracket from Reeve Store Equipment Company combines a defined weight rating, tempered steel construction, and a shelf lip suited to glass, so it fits commercial shelving plans that demand predictable support. Its typical use with RV20 and RV40 series standards aligns it with common upright systems, simplifying layout continuity across new or existing runs. When a satin zinc finish and a 6 inch projection match the shelving depth and visual requirements of your project, this RV41 41-6 bracket offers a consistent way to build out glass shelf rows.
Sold In: 1 Each
