Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8' RV40 single slot shelf standard from Reeve Store Equipment Company provides a continuous vertical track for adjustable shelves in closet, retail, or storage layouts. The satin zinc finish on this RV40 standard creates a neutral, professional look that works in many visible installations where exposed hardware must stay visually consistent along the entire 8 foot run. The shelf standard is made from 0.0625 inch thick cold rolled steel, giving the upright a solid backbone that resists flex under normal bracket loads so your bracket engagement remains secure over time. Its single slot design matches the RV40 series interface, so Reeve RV41, RV43, RV81, and RV83 series brackets lock into the profile for coordinated shelf support. At 8 feet long, this 40-8 standard supports tall wall sections or full-height shelving runs without needing multiple joints.
This Reeve RV40 shelf standard is 8 feet long, so it spans a large vertical section and ties multiple shelf levels into one continuous upright during mounting. Its 11/16 inch wide x 7/16 inch deep profile fits flat against the wall while leaving enough depth to fully seat compatible RV41, RV43, RV81, and RV83 series brackets once the standard is anchored. The standard has screw holes on 6 inch centers, forming a repeating pattern that lines up fastening points for each stud or backing location along the wall height. Recommended fasteners are #7 flat head screw, so the screw head seats flush into the countersunk holes and leaves the bracket channel clear for smooth bracket engagement.
The Reeve Model RV40 shelf standard in the 8 foot 40-8 length works well anywhere tall, adjustable shelving is needed along a wall. Because the standard is described as typically used with RV41, RV43, RV81, and RV83 series brackets, it suits layouts where those specific bracket families are already specified or stocked, keeping the support system consistent across a project. The satin zinc Brillatone finish and Brasstone options in the RV40 series give flexibility to match surrounding store fixtures or closet hardware, so the standard can run from floor toward ceiling without drawing unwanted attention. With an 11/16 inch wide by 7/16 inch deep section, the upright occupies minimal wall projection, which is useful in aisles or closets where every fraction of depth helps maintain clear passage and full shelf depth. Available lengths in the RV40 family range from 12 inches through 96 inches, including this 84 inch option, so installers can combine heights across a build while staying in the same standard profile.
The RV40 shelf standard features slots adjustable in 1 inch increments, which creates a clear reference grid for setting shelf elevations and repeating those elevations across multiple bays. That 1 inch step spacing reduces layout time when matching shelf lines, because installers count slot increments rather than measuring every bracket position. Screw holes on 6 inch centers simplify fastener layout along the 8 foot height; this recurring spacing helps spread load and keeps each standard secured at multiple points without custom marking. The 0.0625 inch thick cold rolled steel construction contributes to the rigidity of the standard, so once fastened on 6 inch centers, the upright supports the RV41, RV43, RV81, and RV83 series brackets with minimal deflection during normal service. The satin zinc Brillatone finish on steel resists visual wear better than unfinished material in typical interior environments, which helps shelving runs maintain a consistent appearance even as brackets are moved among the 1 inch increments. With the RV40 family offered in multiple stated lengths, installers can select this 8 foot standard for full-height runs while using shorter RV40 lengths in lower sections or specialized bays, all while keeping the same bracket interface for RV41, RV43, RV81, and RV83.
The RV40 40-8 shelf standard is typically used with Reeve RV41, RV43, RV81, and RV83 series brackets, so those bracket families fit the single slot profile for adjustable shelving.
The Reeve RV40 single slot shelf standard in this version is 8 feet long, allowing it to span tall wall sections for multiple shelf levels in one continuous run.
The RV40 standard measures 11/16 inch wide by 7/16 inch deep, so it stays relatively low profile on the wall while still accepting the matching bracket series.
The RV40 shelf standard has screw holes on 6 inch centers and uses recommended #7 flat head screws, which sit flush in the countersunk holes for clear bracket engagement.
The RV40 upright features adjustment in 1 inch increments, so shelf brackets can be moved up or down in 1 inch steps to set precise shelf heights across a run.
The RV40 8 foot standard is made from 0.0625 inch thick cold rolled steel with a satin zinc Brillatone finish, giving a solid metal structure with a clean metallic appearance.
The Reeve RV40 single slot shelf standard in the 8 foot 40-8 size combines 0.0625 inch thick cold rolled steel, satin zinc Brillatone finish, and 1 inch adjustment increments to support precise, tall shelving layouts. Its 11/16 inch wide by 7/16 inch deep profile and screw holes on 6 inch centers simplify aligning and fastening each upright while maintaining alignment for RV41, RV43, RV81, and RV83 series brackets. For projects using the RV40 family across multiple heights, this 8 foot length anchors full-height bays within a consistent bracket and finish system. Choose this RV40 40-8 standard when an 8 foot, adjustable, satin zinc shelf upright matches the required bracket families and wall height.
Sold In: 1 Each
