Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 inch RV81 heavy duty center wood shelf bracket from Reeve Store Equipment Company is a tempered steel bracket designed to support wood shelving in store, closet, or garage style systems. The .085 inch thick tempered steel construction carries higher loads while resisting bending, which matters when shelves are stocked with heavy product or supplies. The satin zinc finish, described as Brillatone (Zinc), gives a clean, neutral look that works in commercial or residential environments where exposed hardware needs to look consistent. RV81 brackets are typically used with RV20 and RV40 series standards, so this 10 inch center bracket fits into that established standard system for coordinated layouts. A weight rating of 200-450 pounds per pair, depending on length, means the 10 inch size is part of a bracket family built for heavy-duty service where bracket failure is not acceptable.
This Reeve RV81 center wood shelf bracket in the 10 inch length is described as typically used with RV20 and RV40 series standards, so the bracket flange and three engagement teeth are configured to lock into that style of standard. The center flange style means the support sits under the shelf centerline, which balances load on wood shelving during use. Stabilizers built into the bracket reduce sway at the standard interface, which helps the 10 inch bracket keep shorter shelves tracking straight along a row. With the RV81 family using consistent construction across its available lengths, installers can mix this 10 inch center bracket with other RV81 sizes in the same standard run while maintaining uniform engagement and alignment feel.
The 10 inch RV81 heavy duty center wood shelf bracket from Reeve Store Equipment Company fits naturally into Reeve RV20 and RV40 series standards, forming part of a modular shelving system. In use, the 10 inch length suits wood shelves where a moderate projection is needed, such as retail display bays, closet sections, or utility shelving where loads are significant but depth is controlled. The .085 inch thick tempered steel construction allows this bracket to carry part of the RV81 series 200-450 pound per pair rating, depending on overall bracket length, so wood shelves can be stocked with dense items like hardware bins, folded product, or garage supplies. Stabilizers designed into the bracket limit side-to-side sway at the standard, which matters in aisles or work areas where shelves are bumped during stocking or picking.
The RV81 bracket family, including this 10 inch center version, uses three engagement teeth to connect into the standard, creating multiple contact points so the bracket seats firmly and helps resist pullout under load. That three-tooth engagement spreads stresses over more of the RV20 or RV40 standard, which is important where shelving runs carry mixed loads and get adjusted over time. The center flange style positions support under the middle of the wood shelf, which evenly shares weight across the bracket and shelf joint. The satin zinc Brillatone finish gives a consistent, metallic appearance, allowing the visible parts of the bracket to blend with other Brillatone zinc hardware in the same installation for a unified look. With matching left, right, and center flange options in the RV81 line, installers can set up continuous shelving runs using the same basic bracket geometry, simplifying layout, replacement, and future reconfiguration.
The 10 inch RV81 center wood shelf bracket is made from .085 inch thick tempered steel, which provides strength and stiffness for supporting wood shelves under heavy loads.
The RV81 series weight rating of 200-450 pounds per pair, based on length, means these brackets are suited to heavy-duty shelving where shelves carry dense products or supplies.
The Reeve model RV81 is typically used with RV20 and RV40 series standards, so the bracket teeth and flange are configured to fit that standard style in shelving runs.
The RV81 brackets are designed with stabilizers to reduce sway, helping shelving stay steadier when bumped so product rows remain straighter along the wall.
The RV81 bracket has three engagement teeth, creating multiple contact points in the standard so the bracket seats firmly and resists shifting under load.
RV81 shelf brackets are available in Brasstone and Brillatone (Zinc) finishes, allowing the visible hardware to coordinate with surrounding fixtures and metal trim.
The 10 inch RV81 heavy duty center wood shelf bracket in satin zinc from Reeve Store Equipment Company brings together tempered steel construction, three engagement teeth, and sway-reducing stabilizers for demanding shelving layouts. Its role within the RV81 family, typically used with RV20 and RV40 series standards, means this center flange bracket fits a proven standard system while supporting wood shelves at a useful projection. For projects where wood shelving must carry substantial weight and stay visually consistent with Brasstone or Brillatone zinc hardware, this 10 inch RV81 center bracket offers a focused option ready to serve as part of a coordinated shelving run.
Sold In: 1 Each
